Traxxas 1/16th scale rear differential replacement. Any 1/16th scale model.

Рет қаралды 23,962

Күн бұрын

Step by step instructions on how to replace your pinion and spur gear on any Traxxas 1/16th scale model. E-revo, Summit, rally, mustang, Grave Digger...you get the point.

Пікірлер: 29

@playingmantis3237 2 жыл бұрын

Thank You Shawn! This was comprehensive AF and appreciated. I learned something today friend.

@nicolebell3481 4 жыл бұрын

This is very helpful you actually tell us the truth on what to do thanks my sons erervo is finally fixed

@choke666 3 жыл бұрын

HAY MAN, AWESOME. THANKYOU, MUUCH APPRECIATED!!

@612murderapolis Жыл бұрын

Glad you did a video i would have been so lost tryna fix my E-revo 1/16

@JPTulo 4 жыл бұрын

Nice vid! Just an FYI, but the big gear in the differential isn’t called a spur, we refer to that as the ring gear. 👍

@davidgriffith784 2 жыл бұрын

Thanks for the video it helped alot

@vedaantyadav7829 5 ай бұрын

what oil do you use to lube the 3 small gears in the spur gear?

@monkeytrident 3 ай бұрын

@Fix It & Laugh do you know the part number for the camber suspension arms top holes which fit into the aluminium rear bulk head ?

@rcx2699 4 жыл бұрын

What was the smallest size allen wrench you used? I lost mine and I dont know the size.

@TannerWalker4495 4 жыл бұрын

I'm pretty sure it's 1.5mm

@MrDroski100 5 жыл бұрын

Good job. I think I’ll buy part 7079 and get to work!! I think I have the same problem with the clicking!!

@tristanlance6413 2 жыл бұрын

I know I’m a bit late, but how did you take the driveshaft off the differential?? The Allen wrench provided won’t work

@leanderd1 2 жыл бұрын

1.5mm hex grub screw. On some models it's more like a 1/16'

@theangrypickle96 4 жыл бұрын

Do these need diff oil? New to the hobby and diff oil of different weights are on the parts list.

@kadeluis8724 3 жыл бұрын

Idk I’m trying to figure that out too

@Juloww 3 жыл бұрын

@@kadeluis8724 same lol did u find ? if yes or no ?

@leanderd1 2 жыл бұрын

Yes they do.

@612murderapolis Жыл бұрын

The rears need 35k weight

@shrekda59 Жыл бұрын

Do you fill it up or just coat it with the oil?

@ronbryant6094 3 жыл бұрын

It's not a spur gear It's a ring gear

@1994RALLY 3 жыл бұрын

Where does the 1 long screw go

@jeremypoulos4963 Жыл бұрын

I'm sure you found it by now lol but for anyone else wondering the long screw goes through the side of the diff case

@1994RALLY Жыл бұрын

@@jeremypoulos4963 yess 🤣 I wrote you a year ago, I have had about 30 different rc cars since then

@Geewattaguy1 2 жыл бұрын

I hope I never have issues with my diff.

@shawnmacalvanah6106 2 жыл бұрын

Eventually you will. Unless you have to brushed version.

@leolux09 2 жыл бұрын

Wow. So many unnecessary steps taken here. I literally just shimmed a rear diff without removing anything above the shock mounts. Rear skid plate, wing mount and the two screws holding the bulkhead in-place and the rear diff is free. Whole process should take about 10 minutes.

@leanderd1 2 жыл бұрын

True, but if you do as little maintenance it's a good idea to have a look under all those skid plates if everything is still there.