Augusta Nitro RC Team presents our version of field stripping a spur gear in the field. Then some jumping and bashing. We start by showing you how to change a spur gear out, then we show you how we spun our gear.
Пікірлер: 36
@oatybuck6 жыл бұрын
You also need to loosen the engine screws and reset the mesh friction or the gear will just strip out again.
@AnthonyGman5 жыл бұрын
Negative
@trevorhuebner477310 жыл бұрын
Thanks for letting me know that the transmission is easier because I almost took out the engine
@AugustaNitroElectric10 жыл бұрын
Np..always love to hear we are helping people.
@beckermdgamez90492 жыл бұрын
Awesome video some good tips for fixing the spur gear. Im a begginer so I don't know how to do it
@ultimatejourney43713 жыл бұрын
Great stuff 😉
@resdawgs8 жыл бұрын
Helpful video..thanx..also you can get the metal spur gear..
@IFONLYICOULDHELP8 жыл бұрын
Great video thanks
@IFONLYICOULDHELP8 жыл бұрын
Just replaced my spur gear today thought those were the only two methods and I was right :)
@frosty71547 жыл бұрын
very awesome
@hammypants37473 жыл бұрын
I wonder if that kid ever got a brand new bike with a brand new everything?
@Ajgetsthebag Жыл бұрын
Lmaoo
@LEEELDONYZ2509 жыл бұрын
Have you tried just taking out set screw from muffler.Then taking out the four motor mount screws on top.
@AugustaNitroElectric9 жыл бұрын
LEEELDONYZ250 Yes, both ways are efficient!
@BruceAllentools7 жыл бұрын
LEEELDONYZ250 you only need to take the muffler screw out and 2 motor adjustment bolts out... i learned the hard way lol.
@kevinmobley119 жыл бұрын
Can I replace my 38t spur with like a 42t without changing anything else. It's on my 3.3 revo
@AugustaNitroElectric9 жыл бұрын
Kevin Mobley Yes, you will just have more top end. You won't come out of the house so fast but you will have higher top speed.
@enigma97897 жыл бұрын
Augusta Nitro RC that's the opposite of what a larger spur gear will do.
@extremebassline72816 жыл бұрын
nope bigger spur = slower
@jackdurden4662 жыл бұрын
@@extremebassline7281 I’ve also been told that a larger spur gear would give me more off the line speed, but it just didn’t make sense to me. Less teeth = easier and faster total spin. More teeth = slower and longer 360 spin. It seems so simple in my head, that’s exactly why I asked around.
@jackdurden4662 жыл бұрын
Loving the exhaust, Is that an RD Logic? I’m really wanting to get one like it but they just don’t seem from the pics that they’ll hook up easily to the manifold. Maybe I’m wrong.
@AugustaNitroElectric11 жыл бұрын
Destruction of what rack?
@SebastianLong6 жыл бұрын
Get yourself one of those little magnetic parts trays for your nuts, bolts, and screws. Will save your ass one day.
@cmbushfl6 жыл бұрын
How does the cones go on ?
@dennissnell17895 жыл бұрын
Yeah that's what I was saying.. I think if you watch close enough u can figure out that the cone goes up.. at least that my guess
@stevencrellin98425 жыл бұрын
“Brake shoe” 😂
@miguelduarte88329 жыл бұрын
Where does the yellow wire connect to
@resdawgs8 жыл бұрын
So indeed i would have to remove the drive shaft off the transmission? Right?
@jackdurden4662 жыл бұрын
I didn’t when I changed my spur, well tightened it. But I went the engine removal method.
@mmsolo51077 жыл бұрын
How did you strip the spur gear? I did the same thing to my slayer but not sure how it happened.
@extremebassline72816 жыл бұрын
cuz it's plastic
@robm.68255 жыл бұрын
Landing a jump while on the gas. Or, you have the slipper tightened down too much.
@djgofuckyourzelfnyc4774 жыл бұрын
What body is that on your revo????
@WarzywkoRcWRC11 жыл бұрын
TQI telemetry Not bad .. and what was the reason for the destruction of the rack ..
@frosty71547 жыл бұрын
can anybody help me why my revo 3.3 not shift in 2nd gear