Traxxas Sledge | M2C Motor Mount Installation

Рет қаралды 4,782

5 ай бұрын

Today we installed the forward facing M2C motor mount, a must need upgrade. If you’re having issues with gear mesh, broken gears, or bent chassis, install the M2C motor mount. This is a full installation video to help you install this amazing product. Below you will find links to all the parts used in this video along with a link to where you can purchase them.
M2C Forward Facing Motor Mount: $92.56
m2cracing.net/shop/shop.php#!...
Motor, 2000Kv 77mm: $149.95
traxxas.com/products/parts/3483
13T Pinion, Hardened: $10
traxxas.com/products/parts/6483X
Rear Wing: $16
traxxas.com/products/parts/9517
52T Spur Gear, Hardened: $34.95
traxxas.com/products/parts/9652X
52T Spur Gear: $12
traxxas.com/products/parts/9652
If you have any questions please feel free to leave us a comment, email, or one of our other social media platforms. Thank you for watching
Please LIKE and SUBSCRIBE, don’t forget that notification bell so you don’t miss out on upcoming videos.
Visit Redbanditracing.Wordpress.com for more information, photo gallery, and links to our other social media.
Redbanditracing@outlook.com
#traxxas #rccars #rchobby #redbanditracing #newvideo

Пікірлер: 51

@Havingoneofthosedays- 5 ай бұрын

Nice parts list. That’s awesome on Traxxas . That new motor mount is clutch. It’s strange the gear mesh sounded loud in that video clip when it broke

@redbanditracing 5 ай бұрын

Yeah, I think the motor mount screws came loose cause you can see the damage to the slots in the chassis. I didn’t hear the motor go out from where I was standing, but everyone else heard it very clearly.

@lukerecore 5 ай бұрын

I love m2c, and I'm pretty sure that u could have got a m2c chassis for the sledge. And u would be running into these issues. Great step by step.

@redbanditracing 5 ай бұрын

I will eventually get the chassis, but I typically upgrade as I go. Some things don’t need to upgraded. M2C makes some great parts.

@KILLIERrc 22 күн бұрын

The repair videos are so detailed , great upgrade

@user-bi3zc7gd9i Ай бұрын

When you install the part with the spur gear and 2 brgs I suspect the bearing OD is a clearance fit wrt the bearing housing including the two shims and when meshing the gears it biases the bearings to one side of the brg housing bore otherwise the bearing OD will end up rotating to some degree with the drive shaft. The bearing IDs look like they are press fitted onto the input output shafts of the differential part with the spur gear. This part of the design is central to how it wears over time and the bearing preload both radial and axial with is critical to its performance. Just chiming in bc I am thinking about getting this RC and most certainly will need this motor mount mod.

@maltesrc 5 ай бұрын

It depends what side of the transmission the rotor is

@maltesrc 5 ай бұрын

I say the rotor. I obviously mean the magnets

@redbanditracing 5 ай бұрын

I knew what you meant, thank you. So the reverse motor mount is for aftermarket motors?

@maltesrc 5 ай бұрын

@@redbanditracingit’s so you can mount up longer motors

@maltesrc 5 ай бұрын

@@redbanditracingglad to help 😊

@kayterrorkaefer7127 2 ай бұрын

great Video, Bandit ... have bought the same M2C forward facing motor mount for my Sledge ... good to know, such usefull upgrades ... pls more of them ... have a nice day ... Greetz from Germany ... Kay

@redbanditracing 2 ай бұрын

Thank you

@benjaminbarmore805 5 ай бұрын

Your videos are freaking awesome. You deserve way more subs than what the channel shows! Definitely got my sub

@redbanditracing 5 ай бұрын

Thank you!

@redbanditracing 5 ай бұрын

Thanks for the sub! Put the word out for us, our next goal is 10K

@DistanTThunder2 5 ай бұрын

I love those wheels 🙌🏾🙌🏾😍

@EJ-74 5 ай бұрын

👍👍👍✌️

@Brettloves_RCS 5 ай бұрын

Love the vids keep it up! My favorite is still rustler 4x4 and bandit.

@_Wheelsman_ Күн бұрын

Thank you for the amazing video!!!

@redbanditracing 23 сағат бұрын

Glad you liked it

@bobrobinson360 5 ай бұрын

Traxxas does make outdrive cups for the center diff the part # is 9586x for the trx ones

@redbanditracing 5 ай бұрын

I did see those, and might grab them. Debating on getting the M2C 1492 drive cups. They are captured so the dog bone doesn’t come out. Check them out let me know what you think.

@bobrobinson360 5 ай бұрын

@redbanditracing I did see them. They would be better in the front and rear differentials but the center is fixed so not sure if it would be that much better in the center diff

@redbanditracing 5 ай бұрын

@@bobrobinson360 M2C doesn’t make them for the center yet, they emailed me back. I will be grabbing the TRX for the center diff. Bashed the Sledge pretty good recently and the motor mount did great. Sledge is a lot quieter also.

@desertrider325 3 ай бұрын

Great video!

@redbanditracing 3 ай бұрын

Glad you enjoyed it

@johnedwards277 4 ай бұрын

That is another great video keep it up 👌👍✨️

@redbanditracing 4 ай бұрын

Thank you! 👍

@joelhamilton6784 5 ай бұрын

I didn't even waste my time on any traxxas products for my sledge I'm full of m2c and vitavon then got to heavy so I changed to max 6 hobbywing with the 4985 motor. And it's a beast now

@scottfirman 5 ай бұрын

That shaft would have bent, not broken like that. My guess is there was a microbubble in the material. It was good of Traxxas to replace the motor as defective, because it was. I have abused my Traxxas E- Revo 2.0 and everything but the motor has been broken. My idea is that I got my Traxxas cars to enjoy, not be shelf queens. No Traxxas cars are not perfect, but they are fun!

@redbanditracing 5 ай бұрын

I agree, it was definitely faulty and Traxxas agreed. I’ve seen those shafts bend but not break off. Once this rain stops, we’re gonna send this sledge pretty hard and test that motor mount system.

@joemomma707 5 ай бұрын

I’m ordering the M2C motor mount for my sledge. Thank you for the amazing video!!! Someone told me to get the reverse facing in case I upgrade the motor. What do you think? I am a noob and can follow your video. I’m worried if I get reverse mount, the install won’t be the same lol

@redbanditracing 5 ай бұрын

Really just depends on your plans for the Sledge. I don’t plan on upgrading the motor, more power isn’t going to solve the issues it has it makes them worse haha. Glad you like the videos, more bashing once the weather clears up.

@joemomma707 5 ай бұрын

@@redbanditracing honestly, I regret buying the sledge. I have the dry ultimate and have zero issues. I bought the sledge thinking it would be a nice addition. I would have much preferred even buying the regular xrt and would have saved money since I’m going to have to dump $$$ into this stupid sledge

@Brayl129a1 5 ай бұрын

Man I may need to get one of those for my sledge so far no problems but do you know since I put a little bit wider wheels on mine Will it destroy the spur

@redbanditracing 5 ай бұрын

No it should be fine with the wider wheels, I also put hub extenders on to fit the Arrma Dboots. It’s a great upgrade for the Sledge.

@Brayl129a1 5 ай бұрын

@@redbanditracing I'm eyeballing the M2C extended hexs

@redbanditracing 5 ай бұрын

I went with Hot Racing, cheaper, and just as good. I love M2C but they are very over priced. Part #HRAERVT10W (Amain Hobbies)

@kmass77 4 ай бұрын

You can get a pack of stainless steel zip ties at harbor freight and definitely use the two sided tape!

@numbcuts5936 5 ай бұрын

What brand of cordless driver you using? Great videos.

@redbanditracing 5 ай бұрын

Ryobi, $20-$40 depending on type. They work great from RC stuff. Thank you for watching

@boduke9428 5 ай бұрын

You can buy a good motor for that Traxxas motor price. I get warranty but anyone paying out of pocket for that is just wild. I like the Sledge but I'll just buy my 6s Arrma rigs from Arrma. Same as i don't want a 8s plastic Arrma

@redbanditracing 5 ай бұрын

Traxxas makes decent electronics, I’ve only experienced a few issues. They are a bit pricey definitely. Plastic Arrma, are you referring to the XMaxx?

@macmccartney5760 10 күн бұрын

Yeah they even released a "new" version for more money and still same old pos chassis , shock towers and hinge pin mounts. Its bullshit. So i got the 4mm thick gpm chassis

@redbanditracing 10 күн бұрын

I will be going M2C eventually

@Dan.B306 21 күн бұрын

Do you have a link for those hot racing adapters? Gonna be getting the back flips

@redbanditracing 21 күн бұрын

www.amainhobbies.com/hot-racing-aluminum-10mm-splined-17mm-hex-for-traxxas-erevo-2.0-4-hraervt10w/p944380

@ChopperCityCamp 2 ай бұрын

How did you go about getting a new motor from traxxas ? My input shaft snapped off yesterday just on flat ground… and i go through spur gears a lot

@redbanditracing 2 ай бұрын

Called Traxxas and sent in my motor with receipt. As for your spur gears make sure the chassis isn’t bent, and mesh is correct. Best thing you could do for that truck is the M2C motor mount.

@ChopperCityCamp 2 ай бұрын

@@redbanditracing yeah after watching your video I’ll definitely be getting that kit , as far as the motor i think I’m SOL don’t have my receipt . Thanks !