Thank you Stevo! I'm usually not the fan of the power wagon but this rig rocks 👍

Thanks a lot. It's a friends truck and I would have made a black beast too 👍

I totally agree. He created a nice rig. Thanks for watching 👍

Thanks a lot buddy! The rig performed great but in did go over the edge a few times :D

Thank you very much Rob! Tom did a fantastic job. Well the edge at 4:20 wasn't as easy as it looked like. The rig fell 3 or 4 times before Tom could finally reach the other side of it :)

Thanks a lot! It turned out awesome :)

Thank you Tibor. Tom did a great job with the body 👍

Thank you very much Wayne 👍

Thanks a lot Rick 😊

Thanks a lot buddy 😊

Thanks s lot my friend. Glad you liked it 👍

Thanks you very much! It's super fun to drive :)

Thank you so much Marshall 👍

Thanks a lot buddy 👍

Thank you very much buddy 👍

Thank you very much for the nice comment Rick 👍

Remote Addicted your welcome bud,really enjoyed this one👍👍

Merci beaucoup Pascal 👍

😊👍@@Remoteaddicted

Thanks a lot Kenny 👍

Thank you very much Robert 😊

Thanks a lot Scott! Tom did a fantastic job. It performs awesome and looks epic :)

Thank you so much! 👍

Thank you very much buddy! 👍

Thank you very much! Glad you liked it :)

Thanks a lot buddy! Well it performed awesome. Just had little problems in the end sequence but that's nothing hard to fix :)

Thank you very much 😊

Thanks a lot for the nice comment 👍

Thank you very much 👍

Vielen Dank 👍

Thank you very much. This rig will be Toms 2019 Class 2 comp rig. 👍

Thank you very much buddy! 👌

Thank you very much! 👍

Thanks buddy 👍

That would be nice :)

Thank you!

Thank you buddy! :)

Vielen herzlichen Dank! Freut mich, dass es dir gefallen hat :)

Thanks a lot 😊

Thanks a lot buddy! :)

Thank you very much 👍

Thank you very much 😊

Thanks a lot! :)

Vielen Dank Thorsten! Das Lob gebe ich gerne an Tom weiter :)

Thanks a lot Danny 👍

Thank you very much! I subbed back 😊

Thank you 😊

Thank you very much Mark! The funny fact: The tires are old Maxxis Trepador from the first Axial Scx10 Kits. Not the best. There are definitely way better tires out there but this time they worked nice :) I was pretty surprised by the performance. The portal axles did a fantastic job. 👍

@@Remoteaddicted They sure did work well - I didn't see much slipping! Yeah, the portal axles look like they perform really well, Tom has made an outstanding rig! :D

Thanks 😊

Thank you very much Joe. Well it went great until 4:20. Then we had to do 3 or 4 takes :D It was a tough line :D

Thank you 👍

Thanks. Unfortunately the body was mounted with the clips first. Actually it holds in the cage without clips 😊

Thank you very much Daniel 😊

Yeah! Thanks for watching 👍

Thanks a lot! This is a custom build cage that has been made for the Trx-4 sport. So I have no idea if the proline cage will fit without mods. :)

I got the same idea... Think it would work out pretty good :-)

Thank you very much 😊

Thanks a lot. It's a friend's rig. He made a cage for the trx so the body was basically mounted to the frame. He told me that he had no problems mounting the body without the cage to the trx. 😊

Thanks a lot! It's Toms rig and hard soldered the whole frame. He's going to solder a sick trail bug for my collection :)

That's a cool friend to have who can make a frame.

Yeah 💪

Vielen Dank! Freut mich, dass es dir gefallen hat. 👍

Thank you! As far as I remember the wheels are Gmade SR-02.

Thanks a lot! It's a friends rig and he hard soldered the cage. 👍

Vielen Dank Diggerman 👍

Oh, forgot to compliment you on your driving skill. You're not just a talented modeler.

Bonus points if you were also the one holding the camera.

Thank you very much! It was a beautiful rig but already changed its owner. The rig was built by insane rc custom builds who already built the cage of my Volkswagen Bugzilla Crawler Bug. Usually (99%) I do film and drive one-handed but this time my buddy drove the beauty 😊

Thank you very much for the nice comment and thanks for the sub. This TRX4 has a custom made cage where the body is attached to (In the video it holds with the body pins). I'm sure that the body will fit the stock TRX4. You just need to check if the wheel base of the body fits the wheel base of the chassis. 👌

Remote Addicted Great! And can you please tell me where to find those lights with the wire feeding through the bottom? Can’t seem to find them

The lights in the front are RC4wd Baja Design LEDs :)

Remote Addicted appreciate it! 👍🏼

Thanks a lot! The cage has been brazed. 👍

Vielen Dank. Ich gebe das gerne weiter. Das Fahrzeug gehört einem guten Freund. Eine Menge Arbeit war das auf jeden Fall. Über den TRX4 hab ich bisher nichts schlechtes gehört, überwiegend gutes. Vor allem der Sport soll günstig und super toll funktionieren. Wenn man auf die Spielerein steht, die Diffs sperren zu können und mit dem zweiten Gang herumzuheizen, dann ist der Defender sicher die bessere Wahl. Wer aber ein günstiges, solides und gut performendes Gerät will, greift zum Sport.

Thank you very much! It's the Pro-Line Racing Dodge Power Wagon body.

Usually I do the filming and driving, no matter what obstacles there are. This time I just filmed it and my friend was driving :)

Hey Michael, sure. You can contact Tom here: facebook.com/insanerccustombuilds/

@@Remoteaddicted hi Charlie. Wrote to him, but he does not built them anymore. Sadly 😒

Damn, sorry, didnt knew that he stopped building those cages.

@@Remoteaddicted maybe I should buy yours ? 😄👍

Haha, it was Tom's truck and it already has been sold 🙂

There were Gemade G-Transitions installed on the truck.

Wheels are GMADE 1.9 SR02 and tires are Axial Maxxis Trepador. :)

@@Remoteaddicted Thank you! Awesome scale look!!

Ja der geht schon sehr gut :) Den Rahmen hat Tom selbst gelötet. :)

Thanks a lot buddy! It's a beast 🤘