Traxxas TRX4M Motor UPGRADES: NEW Injora Brushed Motors for BIG PERFORMANCE GAINS!

Рет қаралды 41,402

Жыл бұрын

In this video I test and review the new brushed motor upgrades for the Traxxas TRX4M just released by Injora. There are two options, a 55T and a 48T PRO. Both of these motors are upgrades to the stock motor in terms of speed and torque with the PRO motor offering up more of each plus an enhanced drag brake. These are available now on Amazon through the links below, or directly from Injora!
55T motor: amzn.to/3m6XsnX
48T PRO motor: amzn.to/3nN6xCS
Affiliate links:
Tower Hobbies:
Horizon Hobbies:alnk.to/aLFxP5n
Amain Hobbies:
FairRC: shrsl.com/3w3co
Discount codes
5% off RCAWD: rcawd.com/?ref=E5EBF8Fu - discount code CapeCrawlers
$10 off any order $50 or more: www.fmshobby.com/discount/Cap... - discount code Capecrawlers
10% off the FMS FCX24 Power Wagon: www.fmshobby.com/products/1-2... - code Capecrawler10%
5% off any Injora products: www.injora.com - code Capecrawlers05
10% off any Little Guy Racing Parts products:
littleguyracingparts.com/ - code CAPE10
5% off any Flubberstufferz products: flubberstufferz.myshopify.com/ - code Capecrawlers5
Email me with suggestions or collaboration inquiries: capecrawlersRC@gmail.com
Follow us on Instagram @capecrawlers!
Timestamps
Close look at the motors: 1:26
Baseline runs, stock gearing: 2:54
55T speed and crawling, stock gears: 4:50
48T speed and crawling, stock gears: 6:57
Baseline runs, crawler gears: 10:14
55T speed and crawling, crawler gears: 12:28
48T speed and crawling, crawler gears: 14:34
Final thoughts: 16:25

Пікірлер: 241

@CapeCrawlers Жыл бұрын

Timestamps Close look at the motors: 1:26 Baseline runs, stock gearing: 2:54 55T speed and crawling, stock gears: 4:50 48T speed and crawling, stock gears: 6:57 Baseline runs, crawler gears: 10:14 55T speed and crawling, crawler gears: 12:28 48T speed and crawling, crawler gears: 14:34 Final thoughts: 16:25

@garymiles4230 Жыл бұрын

I bought the Holmes motors already a few weeks ago but comparing to the holmes is a good question

@Sparroh Ай бұрын

I can’t thank you enough, comprehensive, positive, thorough and fun. These videos have helped so much.

@paulmartinez4994 Жыл бұрын

48t crawler gear vs stock motor and crawler gear would of been what i wanted to see. Perfect video overall.

@Detour_RC Жыл бұрын

Thanks for the awesome video and review. I was just looking at those two motors yesterday thinking about giving one a shot in my defender. Keep up the great work.

@CapeCrawlers Жыл бұрын

Glad it was helpful, thanks for watching!

@Joercgarage Жыл бұрын

Nice detailed comparison great video keep up the great content much appreciated 🙌🏻

@CapeCrawlers Жыл бұрын

Thanks for watching!

@tundrasr5709 Жыл бұрын

I'm more into performance than scale looks. I already had the crawler transmission when I watched your Bettle video, which prompted me to run my defender with no body. Huge improvement, so I ordered the Bettle chassis. After watching this video I ordered the pro motor. I would have liked to see the Bettle in that comparison. Thanks for another great video.

@CapeCrawlers Жыл бұрын

Thanks for watching! I like the bettle setup a lot. I haven't tried these motors in it, but the next time I tear it apart I will give it a go.

@xiuhdj Жыл бұрын

great work putting both motors to the test! I think I need a bronco to join the defender and have a go fast rig and a climb hard rig

@greggrube2948 Жыл бұрын

You're pick of the motors seem to be spot on, I thought the 48t was the way to go also. Awesome video Adam 👍😁

@CapeCrawlers Жыл бұрын

Thanks! That 48t made the choice easy. Great little motor

@ryand4786 Жыл бұрын

Great video , I just received my metal driveshafts from injora . They’re $22 for both , or $87 from Traxxas here in Canada , gives me a little more weight down low and eliminates the oring problem. Now I have the injora motor on order 👍

@CapeCrawlers Жыл бұрын

I love those driveshafts. And thank you!

@paolo8768 6 ай бұрын

16:40 very nice comparative! Thanks for your work!

@Oktourqerc Жыл бұрын

Sweet new intro screen man content has been amazing lately👍

@CapeCrawlers Жыл бұрын

Thank you! I'm having a lot of fun with the content and learning a lot lately.

@jtatkinson6825 Жыл бұрын

Thanks for doing this comparison. I've been on the fence about buying the purple motor and pulled the trigger after watching this. Bought the metal crawler gears as well.

@CapeCrawlers Жыл бұрын

I think you’ll love the combo!

@mikecraig426 Жыл бұрын

Great video and comparison, my friend. I always enjoy your videos and how comprehensive you are with all the technical aspects. I just installed the 47T purple can into my TRX4M bronco with the crawler gears and I love the added performance of the drag brake, additional speed and the massive increase in torque. Highly recommend either of the motor upgrades for the price to anyone into the hobby. Again, great video and keep the content coming, my friend.

@CapeCrawlers Жыл бұрын

Thanks Mike! That purple motor and crawler gear combo is excellent!

@drivingwiththeboyz4552 Жыл бұрын

just orderd the purple motor after installing the crawler gears lol

@chrish9502 Жыл бұрын

Does the new motor torque negate the crawler gears or do you still get that slow speed control?

@mikecraig426 Жыл бұрын

@chrish9502 The torque of the motor doesn't negate the low speed control. The power delivery is very smooth and easy to control.

@chrish9502 Жыл бұрын

@@mikecraig426 thank you. I don’t have a trx4m yet but I’d like a crawler that can still do trail duty!

@alexandertaggart4369 Жыл бұрын

Hell yeah thanks again Adam I just ordered the pro right now!! I've been waiting for a good motor to come out for these things so I don't have to go and put a furitek system in mine..... For now lol

@CapeCrawlers Жыл бұрын

Right on! These motors and the crawl gears rival the brushless system, at least at low speeds. Bargain crawling gains right here.

@stefan-norge Жыл бұрын

Great comparison, Adam. Everything one need to know on point 👍

@CapeCrawlers Жыл бұрын

Glad it was helpful!

@joshsmithy96 Жыл бұрын

I'm definitely going to have to swap out my 87t Holmes hobbies motor. Especially since im waiting for my underdrive gears to arrive for the rear axle.

@Iskremfrpupy 10 ай бұрын

I think the Injora 48T is actually a little harder to control crawling than the stock motor because of the increased wheel speed available. I have crawl gears in both.

@jimkrug2586 Жыл бұрын

Loved the motor/gear comparisons. I currently run a Holmes Hobbies 66T/low range gear combo in all three of my TRX4M's. I'm very happy with that combo but would still like just a bit more wheel speed. I think I may have found just what I'm looking for!! Thanks.

@CapeCrawlers Жыл бұрын

I haven't tried the Holmes motors, but these certainly helped with wheel speed!

@joshsmithy96 Жыл бұрын

You could just run 3s. Voltage = rpm

@jochenhog184 5 ай бұрын

Awesome! Thanks!! 🎉

@bolt.22 Жыл бұрын

Need a tiny dyno to see how they all perform!

@CapeCrawlers Жыл бұрын

Yes!

@KAarnagemAmolgada 9 ай бұрын

kzfaq.info/get/bejne/Z5tnqq-puLuYhGw.html

@tynou6162 Жыл бұрын

I was looking to buy the 48T with the Low Range Transmission Gear Set and thanks to you I’m convinced! 😉👍🏽

@CapeCrawlers Жыл бұрын

It's the perfect combo in my opinion.

@anmic3590 7 күн бұрын

Hi! Which ones of the low range gears will work perfectly for the Defender? I saw on amazon that there are 4 options. 40.3, 9.7, 16.6 and 24.4. Sorry, but I’m new to this and I’m trying to build a Defender from scratch, with injora parts. Also, may I ask what servo and esc will be the best? Maybe waterproof too. As for the axles, I’m thinking about the diamond ones (4M-92SRFR), but still not sure. I will take their universal chassis with battery plate and skid plate, the shafts (4M-50BK) and links (‎4M-20) also from injora, the 53 shocks. Any advice will help me a lot. Thank you so much!

@Arturito2017 Жыл бұрын

It would be fun to see the pro motor with the speed gears

@CapeCrawlers Жыл бұрын

It would be wild!

@kendietz355 Жыл бұрын

I'm happy about these motors.

@Atmotom1 7 ай бұрын

Do you have a video of all the upgrades you have on this rig? Like other than the motor and transmission obviously lol this video is greatly helpful tho

@BigDsRc517 Жыл бұрын

Excellent video!!

@CapeCrawlers Жыл бұрын

Glad you liked it!

@Warloghe Жыл бұрын

48T motor ordered, I wonder what the 48 is like with the speed gears in the overlander🤔

@bolt.22 Жыл бұрын

Injora also just released stainless steel low range transmission gears for the trx4m, good time to get both!

@CapeCrawlers Жыл бұрын

Yes!! I got two sets of the gears on order. So pumped

@RonBernardino Жыл бұрын

Neat trail. Space out some rocks to make it look like real trail.

@CrivRex 6 ай бұрын

A great part two for this video would be diff gears with these* motor combinations. Looking at alternatives right now to get my speed back up.

@kennethrobinson9008 Жыл бұрын

48T & crawler gears changes the game! Nice review. Try the helical diff gears with 9% OD. Ups the game to another level.

@fcukeround Жыл бұрын

Where can you get them? I've been looking everywhere for od gears.

@CapeCrawlers Жыл бұрын

Thanks, and yes they did! I will try the gears for sure.

@kennethrobinson9008 Жыл бұрын

@@fcukeround Injora. Helical stock, OD, UD, and 16% UD.

@fcukeround Жыл бұрын

@@kennethrobinson9008 thank you :)

@byarfy 2 ай бұрын

Hi Adam. Stok motor + low gear or injora 48T + low gear for crawling at low speed and low speed control? I dont care top speed, i like realism and low speed control. Thanks for all awesome videos.

@ericcastaneda8797 Жыл бұрын

I like the 48 turn on the crawler gears.

@CapeCrawlers Жыл бұрын

Same here

@MRSOMEBODYRC 6 ай бұрын

I am curious if this motor will work on my wpl c24, stock gearing. I did purchase the injora 180 motor and will attempt to install and see what happens. There is no videos about such upgrade on WPL. might need to change polarities due to being revered rotation.

@GeorgeLoch 2 ай бұрын

I just added the 48t motor and craw;er gears to my Bronco and found that it works great but is a lot louder. Did you see that change in yours?

@keith6360 Жыл бұрын

What a great comparison! Thank you for this. Im wondering how fast does it drain the battery with the new motor? I imagine it drains it much faster?

@CapeCrawlers Жыл бұрын

Thanks for watching! I have not noticed a significant drop in battery life. My son and I both get multiple sessions out of the trucks without the battery dying

@junebugpetty7386 10 ай бұрын

What’s tires and rims are you running?

@ThePurposeFullLife 10 ай бұрын

What esc mode were you running in this video?

@wingnutbert9685 Жыл бұрын

Love to see you try to fit one of these in an scx24! Has axial or any after market company come out with either a two speed or a slow creep gear box for the scx24? The whole number of turns as relating to torque vs speed makes my dyslexic brain melt down! LOL! Thanks!

@CapeCrawlers Жыл бұрын

The closest I've seen to a reduction gearbox is the Hot racing unit, but that only overdrives the front and leaves the rear stock. I would love to see someone put some serious R&D into the gearbox of the scx24.

@wingnutbert9685 Жыл бұрын

@@CapeCrawlers Hopefully the success of FCX and now Traxxas with spur Axial to get off their backsides and get with the program. I think they kinda blew it with the AX, from the looks of it. More or less just a rejigging of the SCX24 with a cage. That kind of boardroom/accounting dept. approach is gonna get them kicked to the curb.

@boiledtea479 Жыл бұрын

ive got the purple one for the scx 24 nd i really like it. waaay more low speed control and with a lowwer gear ratio it would be waaaay smoother. defo a future projekt

@CapeCrawlers Жыл бұрын

I've got the pro motor in some SCX24's and really like it also. Tons of power!

@boiledtea479 Жыл бұрын

@@CapeCrawlers yes!!!

@wingnutbert9685 Жыл бұрын

@@CapeCrawlers I was just thinking to ask if this 180 size fits in an scx24. So just to be clear, you are talking about this pro size, not the smaller 050 scx24 size pro?

@hypnoticpenguin666 Жыл бұрын

Love to see the speed gears with 48t

@CapeCrawlers Жыл бұрын

Oh man, that would be a missile!

@RCHOBBIESPR Жыл бұрын

Great video

@CapeCrawlers Жыл бұрын

Glad you enjoyed it

@j2themen07 Жыл бұрын

What Brushed Hobbywing ESC would you rock with the pro motor and crawl gears, plus adding the 9% OD and 9% UD for the front and rear, any thoughts? Thanks in advance.. love your videos.

@CapeCrawlers Жыл бұрын

I am not real familiar with Hobbywing products, but I would probably go with the 1625 1/18 esc if it were me.

@rodz017 Жыл бұрын

i run Hobbywing 1080 g2 with Homles 66t , crawler gears , INJORA Overdrive Alloy Steel Helical Gears front only , on 3s n she prefect got the bump speed n down low crawling to match ....everything is on defender is metal MAX OUT brass n aluminum etc with carbon fiber chassis LCG from MEUS

@adventures3699 3 ай бұрын

Do you have a link for crawler gears??

@RCCrawlerz209 6 ай бұрын

What gears did you put into the Bronco?

@rcglock9608 Жыл бұрын

I would love to see traxxas come out with a 3s lipo and esc combo then we could use stock motor and low gearing to get more speed but still have the low end control just the 10th scale rigs vi would jump on that

@CapeCrawlers Жыл бұрын

That would be awesome

@joshsmithy96 Жыл бұрын

I run a furitek esc with my brushed Holmes hobbies motor on 3s. Obviously you need a transmitter and receiver if you replace the traxxas 2 in one junk

@porsche550s Жыл бұрын

That bronco body is beautiful. Custom paint or did you purchase from somewhere?

@CapeCrawlers Жыл бұрын

It's the cyber orange optional body from Traxxas. I scooped it up at my local shop!

@cbix86 Жыл бұрын

48t looks perfect, such a shame they aren’t waterproof though 🙈 I’ve tried the 66t Holmes and it still lacks punch and high speed!

@URsooomad8613 Жыл бұрын

Yea not being Waterproof really ruined them, Holmes Hobbies is definitely the way to go

@petejones6827 Жыл бұрын

why would it not be waterproof? cause the board? you can just paint it with a waterproofing agent. all electric can motors can be submerged hell most people put them underwater and run them to break them in and wash out the bits from the brushes breaking in. if i remember right i did that to try it out on my fms k10 which i put the injora scx24 motor on and i ran it for a couple mins in a cup of water before i put it on and its still goin strong that was a couple years ago now

@TheRustyPlace 7 ай бұрын

Do you think the 48T motor with crawl gears is fast enough for trailwalking? I most want to take it on hikes, but occasionally do some crawls when I find good spots on the trail.

@CapeCrawlers 7 ай бұрын

No I don’t think so. It’s still awfully slow

@BellaT-nu4vv 29 күн бұрын

the problem is the low level modulation of the esc with that thing. the best solution is still furitek

@IPS0125 Жыл бұрын

Which one did you like better with the stock gearing though? If you could only pick one and the slow crawl is your priority.

@CapeCrawlers Жыл бұрын

I think the 55t on stock gearing. Good blend of smoothness and speed. We left that in my sons defender and would have made that choice even if the pro motor wasn't claimed by myself

@Slozzy_RC Жыл бұрын

After some weight on the defender, going over things and turning causes it not move anymore until the wheels are straight. Do I need a new motor? or ESC?

@CapeCrawlers Жыл бұрын

Probably a new motor. I've seen folks overload the esc as well. But I would try a motor upgrade first.

@Broomstickzzz Жыл бұрын

Injora pro or big block motor with a crawler gears. Would love your advice. Thank you for the awesome videos and channel

@CapeCrawlers Жыл бұрын

I have not tried the big block on the Traxxas, but I have in the SCX24. It's a beast; very broad power with lots of top end. I can imagine you would get similar low speed torque to Injora Pro, but the big block would likely walk away from it at high speeds. I may have to try the big block myself to compare them!

@Broomstickzzz Жыл бұрын

@@CapeCrawlers awesome thank you for the help!

@mpampis_o_fou2027 Жыл бұрын

excellent and informative video,how is the black traxxas servo compare to others?because it is waterproof!

@CapeCrawlers Жыл бұрын

Thanks! The servo is comparable to stock in terms of speed and strength, slightly better in both categories but weaker compared to higher end alternatives like NSDRC or even the Injora servos.

@mpampis_o_fou2027 Жыл бұрын

@@CapeCrawlers thank you!

@rigomartinez6678 Жыл бұрын

Did you have to adjust throttle trim for the pro motor? Just got mine had to

@CapeCrawlers Жыл бұрын

I did not on either of mine

@LARANUD Жыл бұрын

Do you think I should try these motors first and then maybe doing the furitek brushless conversion?

@CapeCrawlers Жыл бұрын

Yes absolutely

@nandosss Жыл бұрын

So... what is better? Stock motor w/high gear or Injora motor w/stock gear? Nice vídeo!

@CapeCrawlers Жыл бұрын

Depends on what you want. The stock motor with speed gears is still faster than these motors on stock gears. So if you want speed, that gear set is where it’s at

@Atlas_FPV Жыл бұрын

The 55T looked smoother for crawling, is that just how it seems or is it smoother at low speed?

@Atmotom1 7 ай бұрын

I thought that as well and wanted to know the same thing. I think I kinda liked the way the 55t looked crawling more. Gonna have to watch both the runs again a couple more times I think lol but I might be ordering the 55

@darkcloud4368 Жыл бұрын

Did you figure out a solution for the rear body clip on the Injora chassis? Didn't see body moving much when it was crawling.

@CapeCrawlers Жыл бұрын

I swapped the chassis onto my sons defender. It works perfectly on that rig. I could not get it to work on the bronco.

@darkcloud4368 Жыл бұрын

@@CapeCrawlers took a dremel and some hot glue to the body and now it works. Cut the front cross brace of the body.

@dustonc1 4 ай бұрын

1/10th rig cost, double performance? Take my money! Thanks for doing the research :)

@daviddeleon7850 Жыл бұрын

Nice 👍

@SkyVenomMC Жыл бұрын

man the banana bronco is sick

@CapeCrawlers Жыл бұрын

haha thanks!

@rodz017 Жыл бұрын

pretty cool info ...i was wondering if you can do a 48t , 55t VS. a 66t from Homles with crawler gears video .....kind of curious to see how well they compare

@makoskid Жыл бұрын

I'd like to see this test as well.

@CapeCrawlers Жыл бұрын

Yes, I can do this. Lots of folks have asked for it.

@rodz017 Жыл бұрын

@Cape Crawlers Kool looking forward to the in depth video thanks 😊

@SYST3M_OVERIDE Жыл бұрын

Lower turns actually means less torque. With how heavy mine is now I need all the torque I can get.

@CapeCrawlers Жыл бұрын

It's interesting because the 48t definitely seems torquier. That launch during the speed comparisons when my son was driving shows how quick that thing gets off the line!

@jonathanmcdonald5411 8 ай бұрын

Awesome video. I think the 48t pro motor with the crawler gears is the way to go. Were you able to use the pinion that comes on the injora motor, with the crawler gears? Keep makin these great videos, and run those rigs.

@klaboemlol Жыл бұрын

Any chance we get to see these against the Holmes 66t?

@CapeCrawlers Жыл бұрын

Yes I’d be happy to do that

@claudebaron9334 10 ай бұрын

Seems to me, it would be very much beneficiary to have less wheels spins, and if it could be more slow but way more precise controls, to eliminate those nervous spams that happens from time to times especially in the early beginning your touching the trigger the more gently possible…!!! But still ! It keeps jumpy nervous twitch looking like bad habits.

@jaylivengood2697 Жыл бұрын

Wonder if they have more power than the Mofo big block brushed. Would you have any insight?

@CapeCrawlers Жыл бұрын

I do not think they do. I’ve had the Mofo in our scx24’s and it felt much more powerful

@kenrodriguez9645 Жыл бұрын

No bearing kits right? You’re on bushings for both rigs, I believe.

@CapeCrawlers Жыл бұрын

The bronco is all bearings. The Defender has bearings in the axles.

@beng.6417 10 ай бұрын

Have the purple one with crawler gears. They are super loud. Is that normal?

@CapeCrawlers 10 ай бұрын

Yes, they are noisy!

@andreasbitsch7229 Жыл бұрын

I prefer the furitek stinger

@CapeCrawlers Жыл бұрын

Me too, but you're 10X the cost to go that route.

@pseudo8009 Жыл бұрын

What are the shocks you run on your bronco

@CapeCrawlers Жыл бұрын

They are the new Injora oil filled shocks: amzn.to/3GphqkK

@xiuhdj Жыл бұрын

have you experienced any serious torque twist?

@CapeCrawlers Жыл бұрын

In the defender yes, not so much in the bronco

@LostFozz_OverLand 6 ай бұрын

I have an interesting question what do these effect the run time?

@CapeCrawlers 6 ай бұрын

I’ve found they negatively impact run time but not terribly

@LostFozz_OverLand 6 ай бұрын

@@CapeCrawlers what have you found to be good for battery upgrades? Are you on Instagram I’d love to chat some more!

@garymiles4230 Жыл бұрын

How do they compare with the Homes motors

@CapeCrawlers Жыл бұрын

I’ll try the Holmes motors to see how they stack up

@ellisb1451 Жыл бұрын

Have you tried a better TQI remote?

@CapeCrawlers Жыл бұрын

I have not. I should though

@LARANUD Жыл бұрын

I was about to get this motor, but I figure out it’s not waterproof.

@abeservellon1860 Жыл бұрын

I know the stock motor is advertised as being water-proof. Are these motors water-proof?

@CapeCrawlers Жыл бұрын

These are not waterproof

@SixPHD Жыл бұрын

new video LETS GOOOO

@brandontenner7006 Жыл бұрын

What crawler gears were you using in this test?

@CapeCrawlers Жыл бұрын

The traxxas brand

@brandontenner7006 Жыл бұрын

@Cape Crawlers in your opinion are they as good or better than the Injora crawler gears?

@martinwinterman3891 10 ай бұрын

Were these the stock crawler gearings from Traxxas?

@CapeCrawlers 10 ай бұрын

Yes. During the time of recording those were all that were available. I've since got Injora and Meus steel crawler gears in my M's.

@martinwinterman3891 10 ай бұрын

Can i ask wich transmission i need from injora to the same crawler gearing as ingaven now from Traxxas? I geuss the underdrive but i’m not sure.

@rossg6362 9 ай бұрын

Wish they were waterproof

@RCCrawlerz209 Жыл бұрын

I'd probably go with the red motor, cuz some times, slower is better. Lol

@CapeCrawlers Жыл бұрын

We left the red motor in the defender. My son liked that one the most and it worked really well with stock gearing.

@RCCrawlerz209 Жыл бұрын

@@CapeCrawlers Awesome

@jeremychin3076 Жыл бұрын

Can the 48 turn fit in the scx24?

@CapeCrawlers Жыл бұрын

With some modifications probably!

@LARANUD Жыл бұрын

What is the speed difference against the 48t with the crawler gears and stock motor with stock gears

@CapeCrawlers Жыл бұрын

The stock setup is still faster by ~20% I would say

@tymega7680 2 ай бұрын

These motors are just plug and play?

@sebas888888 Жыл бұрын

Careful with your wording on the video title or traxxas will have your channel closed! 😢 Anyway love your content for mini trucks. Peace , may the torque be with you

@CapeCrawlers Жыл бұрын

Thanks! I'm prepared to deal with Traxxas if they come knocking.

@e.magic.7194 7 ай бұрын

What is crawl gear? Where i can buy it?

@CapeCrawlers 7 ай бұрын

Low range gears. Here are my favorite: amzn.to/3T29ywz

@e.magic.7194 7 ай бұрын

@@CapeCrawlers thanks!

@allynj2272 Жыл бұрын

How do these motors affect battery life?

@CapeCrawlers Жыл бұрын

To be determined. I know in the scx24 they significantly shortened battery life. I’ll report back after some more time on them

@me-rn7jx Жыл бұрын

has anybody released an upgraded motor for the fms stuff? im pretty sure they all use the same motor except the fcx i just want somthing with more top end lol

@CapeCrawlers Жыл бұрын

The high speed motor for the FCX24 from FMS is ridiculously fast. I mean bonkers fast.

@me-rn7jx Жыл бұрын

@@CapeCrawlersbut no motor for their larger models darn :/ unless the fcx24 transmission fits in the 1/18th frame rails 😂

@franklinnnn7543 Жыл бұрын

we all are waiting for a toyota hard body build please make one 🙏

@CapeCrawlers Жыл бұрын

I'll check it out!

@dhrider4895 5 ай бұрын

Is it waterproof or not? People seems to say no, but injora say yes. Very confusing

@CapeCrawlers 5 ай бұрын

Injora when these first came out specifically said they were not water proof. I haven’t tested it personally, but I would be surprised if they weren’t

@ethantsai8634 Жыл бұрын

Do you prefer the 48T or 55T?

@CapeCrawlers Жыл бұрын

48t for me

@Dirtbikesforlife13 Жыл бұрын

Is the Injora 180 motors waterproof

@CapeCrawlers Жыл бұрын

No they are not

@jthiemeyer Жыл бұрын

What tires are on the Bronco?

@CapeCrawlers Жыл бұрын

LGRP grippers. Love them!

@junebugpetty7386 10 ай бұрын

What rims?

@gibsonlife573 Жыл бұрын

It's bs that u would ever have to worry about this at all man way better with sxc24 and fms fcx24 with a few mods to them trucks I haven't seem any better

@andrewjackson1380 Жыл бұрын

Is that just the stock traxxas yellow body

@CapeCrawlers Жыл бұрын

It's the optional cyber orange body that Traxxas sells

@nikkihandrich5574 Ай бұрын

❤tr4

@JaredCurrent Жыл бұрын

Think they'll come for you next???

@CapeCrawlers Жыл бұрын

I worry about that honestly.

@tundrasr5709 Жыл бұрын

For what, putting an aftermarket product on a Traxxas vehicle?

@carlose6010 Жыл бұрын

@@tundrasr5709 Starting to sound like Samsung, Apple, and some other corporate demons. :P

@JaredCurrent Жыл бұрын

@TundraSR5 their name is in the title of something they aren't directly profiting from.

@Elisplushies360woodierc Жыл бұрын

Did I miss something? Why all the traxxas hate.I love my trx4m’s and my new trx4 bronco 2021 1/10.

@CapeCrawlers Жыл бұрын

They sent out a cease and desist letter to a bunch of small companies claiming copyright infringement. A lot of folks had products removed and websites taken down.

@Elisplushies360woodierc Жыл бұрын

@@CapeCrawlers Wow! Had no idea. Greed.

@matthewwmullan Жыл бұрын

might be a good idea to back off of traxxas for a while. They took down a bunch of content and product creators. ccxrc, flub rc and 3flow9 were all hit or taken down with no notice.