TRAXXAS TRX4M | Step-by-Step: How to Install Gear Set

Рет қаралды 16,159

Жыл бұрын

I am really enjoying the TRX4M, but when it comes to crawling there are few things that's lacking namely gearing, weight distribution and tires/wheels for better traction and Center of Gravity. In today's video, I am going to show you how to install the gear set step-by-step.
There are 3 flavors available, the high speed gears, stock mid-speed gears, and the low speed crawling gears. I am going to slow it down by installing the low speed crawling gears, but the process will be the same for the high speed gears as well. So enjoy!
PRODUCT FEATURED
TRX-4M Ford Bronco & Land Rover Defender
By: Traxxas
Type: 1/18 Scale & Trail Crawler
Kit Type: RTR
Price: $149.99
Buy: alnk.to/6xH0snB (amain)
You’ll need: 4 AA Batteries
Visit: traxxas.com/
#traxxas #trx4m #rccrawler #minicrawler #rockcrawler #scaletrucks

Пікірлер: 49

@ecoboostedfuze 4 ай бұрын

Thanks for the video, had to leave in the middle of the process and forgot how to put it back together.

@BigSungHobbies 4 ай бұрын

Glad it helped

@petechipps9770 Жыл бұрын

Great install vid. Thanks for keeping it simple. 👍🏼

@BigSungHobbies Жыл бұрын

Thanks!

@RoostedFilms 11 ай бұрын

Outstanding video, easy to follow along. Thanks

@BigSungHobbies 11 ай бұрын

Thank you very much for the comment! Greatly appreciate it.

@jameskenway8691 4 ай бұрын

Very nice instruction! Thank you sir!

@BigSungHobbies 4 ай бұрын

You are welcome! Glad it was helpful.

@islandrc-duke1972 Жыл бұрын

nice gear set and great install

@BigSungHobbies Жыл бұрын

Thanks 🙏

@Gamova91 3 ай бұрын

Thank you, good to follow. I replaced them quite easily :)

@BigSungHobbies 3 ай бұрын

Glad it helped

@bigwillrc8509 Жыл бұрын

Good job!!!

@BigSungHobbies Жыл бұрын

Thank you! Cheers!

@Matiz69 11 ай бұрын

nice, short, on point! Thanks

@BigSungHobbies 11 ай бұрын

Glad it helped!

@MrAnderson2744 2 ай бұрын

thank you sir

@BigSungHobbies 2 ай бұрын

Most welcome!

@stevemcnerney Жыл бұрын

Thanks.

@BigSungHobbies Жыл бұрын

Thanks for checking out the video.

@expediterfromgeorgia7981 3 ай бұрын

Does it not need any grease for the gears? Thank you for the video. I have the gears on the way.

@BigSungHobbies 3 ай бұрын

From what I have read, it doesn't need it, but you can put very light coating if you feel more comfortable.

@rickbarg3980 6 ай бұрын

I changed the whole transmission,to the injora aluminum trannny,stronger than the plastic one

@AMM1998 3 ай бұрын

Cool bro

@georgypadalko2937 Ай бұрын

My slow gears (official from Traxxas) are much louder than the stock ones, is it ok?

@BigSungHobbies Ай бұрын

Mine is a little louder as well. It should be fine, but you can always dab a very thin layer of grease to see if that helps.

@marcinsochacki8707 Жыл бұрын

Traxxax should pay You for so good movies:) thx:)The grease is not needed on theese gears?

@BigSungHobbies Жыл бұрын

It's not needed, but a very light coating works as well.

@dwaynebaker8733 Жыл бұрын

Upgrade radio, and you'll get lots of wheel speed, but smoothe crawl too, the radio is the problem, stock setup is fine

@BigSungHobbies Жыл бұрын

Thanks for the info. Upgrading the radio is a great idea, and one that I plan to do at some point, but $5 gear set will be a good interim solution ;)

@runnerbaba Жыл бұрын

The ESC is the problem ! ^^ Dont tell me you swapped Transmitter and Reciever but still use stock ESC....

@BigSungHobbies Жыл бұрын

It’s possible that he upgraded the transmitter to Traxxas TQi only. TQi offers end point adjustments and possible better control with bluetooth programmability.

@DTW-bx2vy 9 ай бұрын

The reciever is apart of the esc on the TRX4M, so the esc would have to be replaced & then get a seperate reciever.

@rickbarg3980 6 ай бұрын

Good time to upgrade to bearings from bushings ,for even better performance

@ColocasiaCorm 6 ай бұрын

What does do

@BigSungHobbies 6 ай бұрын

Good call!

@BigSungHobbies 6 ай бұрын

Bearings will have slight better performance over bushings.

@expediterfromgeorgia7981 3 ай бұрын

Wouldn’t metal gears be better?

@BigSungHobbies 3 ай бұрын

At the time of the video, these were the only options.

@Kevin45792 5 ай бұрын

So no lithium grease? I would think you would plastic gears dry.

@BigSungHobbies 5 ай бұрын

From what I have seen and heard from others, it shouldn't matter. That being said, if you feel more comfortable, you can always put a very light coating.

@gimaricennel6406 6 ай бұрын

This new gear metal or plastic sir?

@BigSungHobbies 6 ай бұрын

They are plastic gears as far as I can remember...it's been a while since I had installed them.

@focalpointvideo Жыл бұрын

No grease?

@BigSungHobbies Жыл бұрын

Not really needed in this case, but you can put really light coating if you desire.

@geeroo8269 8 ай бұрын

Change what gears with what 🤷‍♂️

@BigSungHobbies 8 ай бұрын

The video provides step-by-step instruction on how to change the gear set. Good luck.

@vanstromi7810 7 ай бұрын

You forgot gear oil

@BigSungHobbies 7 ай бұрын

Thanks for pointing it out. Normally on a 1/10 scale, a light coating of grease is required, but on TRX4M it is not mandatory. That being said if you do put grease, make sure that it's a very light coating.