Traxxas Xmaxx 8s Hobbywing Insanity! 1650kv!
Рет қаралды 80,808
3 жыл бұрынthe Traxxas Xmaxx 8s Gets a New Hobbywing 1650kv motor and esc combo and its totally INSANITY! we also upgraded the servo to a savox 2290, tires to proline trenchers, hobby racing spur and more!
RC Car & Mods in todays Video!! -
Traxxas Xmaxx 8s: alnk.to/7fhRPiK
Hobbywing Combo: alnk.to/a42Cjfx
Savox 2290sg (NON-water proof): alnk.to/7qdSqp3
Savox 2290sg (Water proof): alnk.to/clR5TfZ
Radiolink Controller& Receiver: bit.ly/3xDSHmb
Proline Trenchers: alnk.to/2jFTYOa
Surpass 21,000RPM Fans: bit.ly/21000rpmsurpass
WFO Mini Mount: bit.ly/2UDtjhU
WFO Large Mount: bit.ly/3AUI28J
The Best Smart Gps-
SkyRC GPS GSM020: alnk.to/7fioc7D
Best Battery Connectors! -
Black XT90 Connectors:
America: ebay.us/EinF2L
Australia: bit.ly/Blackxt90s
links are affiliate links and do provide a small commission to my self, but at no extra cost to the buyers.
#traxxasxmaxx #hobbywing #rccars
@Mzlanders 3 жыл бұрын
I’m not stroking your ego here, but the build edit was a thing of beauty. Fantastic. Personally, I’m not huge on too much babbling while doing a build video. Open the part. Put on the part. Send it.
@MatthewSimm 3 жыл бұрын
Thabks mate, appreciate it 😀
@akkressor 2 жыл бұрын
Cannot agree more. Somewhat satisfying and -to-the-point-!
@timt8029 2 жыл бұрын
Man I agree. Very well done.
@ethanbaker218 2 жыл бұрын
I personally love the technology babble!
@kgartin624 2 жыл бұрын
Agreed
@jean-marcrevill3175 3 жыл бұрын
Wow 60miles per hour with an xmaxx!! Impressive. I really enjoy these RC car modification videos which are spliced together! Not too long not too short just the fun bits!
@MatthewSimm 3 жыл бұрын
Hey thanks dude 😀 I really enjoyed making it.
@shawng7902 2 жыл бұрын
I dig your camera angles and editing. The more I watch lately I try to learn about the video structure from the ones I like the most. Who knows, maybe someday I can get something off the ground. Im into so many things I'll never figure out what to do. Your videos are really clean and to the point. Very good job.
@MatthewSimm 2 жыл бұрын
Hey thanks a million dude 😀 Practise makes perfect mate so just give it a go
@brian7316 2 жыл бұрын
that was really awesome Matt ...love that editing of your video ...right to the point on everything you done to your Xmax..bash on my Friend 🤘👊👍
@MatthewSimm 2 жыл бұрын
much appreciated, thanks dude :)
@leroy5007 3 жыл бұрын
Awesome video, that xmax is ridiculous. Love the standing backflips
@MatthewSimm 3 жыл бұрын
Thanks Leroy 😀
@justintam3299 3 жыл бұрын
Awesome vid Matt. Keep up the good work!
@MatthewSimm 3 жыл бұрын
Hey! Thanks Justin, I really appreciate it 😀
@northwestrcs 2 жыл бұрын
Subscribed, you pretty much did exactly what I'm planning with mine. Good video!
@NigelLee190 2 жыл бұрын
These trucks are so much fun. Had me laughing just watching this. Definitely going to run a similar setup in my X-Maxx. Nice vid bro 👍.
@MatthewSimm 2 жыл бұрын
Thanks dude, glad I could make you laugh haha
@nathanwirth9906 3 жыл бұрын
Love that motor esc combo. I got one in a Tekno EB 48 2.0 and it’s nuts Love to see it pull standing back flips in a xmaxx!!!!
@MatthewSimm 3 жыл бұрын
It's wild now haha, I also have one in my mojave and it's awesome!
@NicGoldenEddie 2 жыл бұрын
Had to watch the best thing ever like 13times. The out of nowhere backflip kick jump double backflip combo. Instant 360 with a 720 backflip combo. Also Called the buy one get two free miracle. 🙌
@Addicted_2RC 3 жыл бұрын
Wow!!! Absolute monster with that setup!!! 👊👊👍👍
@MatthewSimm 3 жыл бұрын
Thanks bro 😀
@gabemartinez8321 2 жыл бұрын
Just subbed! Great editing and great enthusiasm in the vid bud!!
@MatthewSimm 2 жыл бұрын
Hey thanks and welcome dude 😀
@SinnisjInsulator 3 жыл бұрын
Always super enjoyable to watch your stuff man. You really look like you're having fun, those traxx are crazy.
@MatthewSimm 3 жыл бұрын
Appreciate it brother 😀
@TobysRCs 3 жыл бұрын
That standing back flip 😱💪😂
@MatthewSimm 3 жыл бұрын
It was so much fun too haha 🤣 thanks for watching!
@donniemarks94 2 жыл бұрын
Great build and run! 👍👍
@genreaper 24 күн бұрын
That front flip where the body flew off made me lol. Nice rig. Im going Kraton 8S myself.
@garethwalker9414 2 жыл бұрын
Well enjoyed, good content and well produced 👌
@MatthewSimm 2 жыл бұрын
Thanks mate, appreciate it 👍
@NBRC 3 жыл бұрын
this is insane Matthew, love it
@MatthewSimm 3 жыл бұрын
Thanks dude 😀
@HalfGiant_S80 2 жыл бұрын
amazing. I currently building an Xmaxx. got it in a bin of random rc parts....I'll bring it up to stock first learn to drive it as it is my first 1/5 scale rc.
@Apollo-oc7hk 2 жыл бұрын
Great video man keep up the good work every time I see one of you it gives me a big smile
@MatthewSimm 2 жыл бұрын
Thanks bro, I'm glad I can make your day a little better! 😀
@nidarmakni4509 2 жыл бұрын
Yeah 🙌🙌🙌 thanks for those links below...nice video 😉👍🏻
@MatthewSimm 2 жыл бұрын
No worries, thanks for watching mate
@addictedtorcs1981 11 ай бұрын
Awesome Traxxas X-Maxx video buddy. Keep up the good work fella. Massive 👍's up!
@m.p1976 2 жыл бұрын
So good great Job ! I love the X Maxxxx !!
@scalecoastheroes Жыл бұрын
I most definitely want to see more videos of your Xmaxx! I’m putting in a 1717 1580kv paired with the BowHouse Rc motor mount.
@MatthewSimm Жыл бұрын
Thanks dude, that sounds like an awesome setup! 👌
@MikeStallone 3 жыл бұрын
The standing backflip is insane. Those tires are definitely a huge reason it does that now. They balloon to perfection. Great vid bro really enjoyed it
@MatthewSimm 3 жыл бұрын
I don't think I'll beabke to stop doing this for a while haha, going to need the heavy duty servo saver spring though and possibly metal turn rods to hold the servos power! Glad you liked it man 😀
@MikeStallone 3 жыл бұрын
@@MatthewSimm I’d order a couple sets of diffs then 😂
@MatthewSimm 3 жыл бұрын
Haha, yeah, I'm going to look into some hardened steel diff gears 🤣🤣
@the_fourth_sheet Жыл бұрын
The tires seem to be perfect but what do you think of the similar badlands mx? Do you think they too ballon to perfection?
@IansRC1031 2 жыл бұрын
Amazing video X-Maxx is my dream rc looks great nice build up 🤟🔥🔥🔥🔥🔥🤟👍
@MatthewSimm 2 жыл бұрын
Thanks Ian 😀
@rcmakingtracks18 3 жыл бұрын
Ha, no such thing as too much power. Epic video. Have a new purple Vorteks turning up tomorrow. Feels like the night before Christmas. Ha. Thanks for sharing. Keep em coming. John
@MatthewSimm 3 жыл бұрын
I love that feeling dude! And I'm glad you liked the video, thanks for watching man 😀
@Mzlanders 3 жыл бұрын
While I feel where you’re coming from, there is absolutely too much power situations. Drove 6S hoss the other day. Trying to bash with it was absurd. Absolutely absurd. Hahahaha. Even blinked in that things direction and it flipped. Some people just love power, and I can’t hate. Whatever you enjoy!!!
@mohamedhaiesyal3179 2 жыл бұрын
Wow..super power!! Crazy!!
@HughsReviews 3 жыл бұрын
YES!! I’ve been waiting for this since we had our back n fourth about the trenchers!!!
@MatthewSimm 3 жыл бұрын
I remember haha 😀 hope you liked the video dude!
@HughsReviews 3 жыл бұрын
Loved it! That triple backflip ability is frickin crazy. I’m still running stock motor and gearing with the Duratrax Hatchets. Blew out my steering servo on Saturday, so I’m sidelined until pay day. lol. Gonna have to get that metal geared one now. Oh shucks. 😂
@MatthewSimm 3 жыл бұрын
Thanks man! But I'll be honest, I kind of gunned it and hoped for the best 🤣🤣 The savox I got is about the same price as the upgraded traxxas servo, but you'll need the gpm adaptor (I recommend it because it has the servo that fits the stock steering bearing) and I'd recommend a heavy duty servo saver 😀
@HughsReviews 3 жыл бұрын
@@MatthewSimm great advise! I’ll look into all options man!
@MatthewSimm 3 жыл бұрын
Happy to help 😀
@jaceswavely3962 2 жыл бұрын
Love that combo I just got one for my tlr typhon and it throws it like a ragdoll
@scottrome7228 Жыл бұрын
Nice build 👍🏼
@eliasstavridis395 2 жыл бұрын
Very nice updated!! look's like you gave to the xmaxx, red bull!!
@michaelorr3487 3 жыл бұрын
Great video sir I really enjoy your content. I don’t own a xmax but would love to get one, I do have a maxx and love it. The price is what’s holding me back. Keep up the great work and stay safe
@MatthewSimm 3 жыл бұрын
Hey thanks Michael, I'm glad you liked the video and I totally understand, the xmaxx isn't cheap!
@jsilva1801 8 ай бұрын
Great video brother
@cjchannel12RC 8 ай бұрын
Back again, since i was getting some info on replacement fans for my X-Maxx's stock heatsink and this month i bought an older 1,100KV Hobbywing. And i plan to run it with the Max 6 that i already have in my truck or go with a Spektrum Firma 160 V2 which is similar to a Max 6 but it's more powerful and it runs better with a firmware update. I might also get the same Trencher tires and maybe an upgraded servo with the standard servo conversion since i don't think the stock Traxxas style servos can handle 7.4 or 8.4V coming from the BEC.
@evoxgeo Жыл бұрын
Dude that thing is a monster. 🤘😎🤘
@christheridge2179 3 жыл бұрын
Great video! That editing must have taken 10 hours! Most people here (Germany) put in the max5 combo. 1.5 mod gears, 25/35
@MatthewSimm 3 жыл бұрын
Hey thanks Chris! 😀 yes, I'd say in total, about 10 hours of editing, give or take an hour. I'm considering a 1100kv with that gearing, this combo is great, but maybe too high of kv haha
@DeRock401 2 жыл бұрын
Really like your editing style
@MatthewSimm 2 жыл бұрын
Thanks dude 😀
@kgartin624 2 жыл бұрын
AWESOME vid!!!
@MatthewSimm 2 жыл бұрын
Thanks legend 🙏
@travisclarkin4277 Жыл бұрын
Triple backflip crazy man
@andreaskayser8369 2 жыл бұрын
Danke dafür das du das in Meilen und auch in Km/h zeigst, schöne Grüße aus Austria !
@keekay_cg32c7.r2 2 жыл бұрын
If I were to have an Xmaxx I'd run the mamba 8s with 1650 combo, since is sensored I won't have to worry about temps, also on sensored it sounds really cool 🤣, also a good idea to do for your maxx and Xmaxx is add washers on all three spots to mount the servo. It avoids tearing the case or adapter when you run the trucks especially on the maxx it's easy to tear it, can't wait for next video :) cheers!
@MatthewSimm 2 жыл бұрын
That would be an epic setup bro! And yeah I should do that but I'm to lazy to pull the xmaxx apart again to get to the servo haha. Video will be soon I've been in lock down and can't go far
@keekay_cg32c7.r2 2 жыл бұрын
@@MatthewSimm the Xmaxx shouldn't really have to worry, it's more on the maxx since it's mounted upside right, it's a great way to keep each corner more secure so it'll prevent it from breaking cases, also when is the wltoys coming out? The one you did 100mph
@raphsgarage5324 2 жыл бұрын
“What setup would you like to run on your X-Maxx?” Me: I already need an X-Maxx before thinking about upgrades 😂🤣
@MatthewSimm 2 жыл бұрын
Haha, when I was saving to get mine, I thought the same thing, I didn't think I'd upgrade it though
@jamesblake1848 2 жыл бұрын
Nice vid 👍👍
@youramericanRcster 2 жыл бұрын
I was a long time subscriber with Kevin Talbot since he had less that your subs. He just hit 1million. Keep doing what your doing and you will hit that too!🤙
@MatthewSimm 2 жыл бұрын
Hey Ben! Thanks for that dude, you have fueled my motivation 😀
@MechanicallyFun 3 жыл бұрын
Backflip Madness!!! 😎
@MatthewSimm 3 жыл бұрын
Yes sir!!
@camrowdrone6497 3 жыл бұрын
Love the power 👊🏻👍🏻
@MatthewSimm 3 жыл бұрын
Heaps of fun 😀
@evoxgeo Жыл бұрын
Did you have to trim the servo screw mounts for it to fit and not interfere with bottom skid plate ?
@shanehambrick7551 2 жыл бұрын
Do have a part number for the heatsink and fan shroud. Can't seem to find the correct heat sink for this motor. Great video. Definitely got a new subscriber here.
@philwebb606 3 жыл бұрын
Excellent vid, xmaxx is a beast
@MatthewSimm 3 жыл бұрын
It's truly is! Thanks Phil 😀
@rcworxshop 3 жыл бұрын
BEAST MODE!!
@MatthewSimm 3 жыл бұрын
Yes! 😎
@THIRKLE1985 3 жыл бұрын
Got the same motor and esc in my notorious v4 pur insanity lol, great video mate👍
@MatthewSimm 3 жыл бұрын
It would be dude! I have it in the mojave project and wow! I tested it on 8s and it's so fast!
@chadlunsford6730 3 жыл бұрын
I've always wanted to see an Xmax built for crawling. Has 2 speed transmission so it can crawl and bash. Locking and unlocking diffs, and maybe even 4ws.
@MatthewSimm 3 жыл бұрын
Yes! That would be pretty epic!!
@nathanm3674 3 жыл бұрын
Traxxas summit….but bigger
@chadlunsford6730 3 жыл бұрын
Exactly dude!!
@meanf1502 2 жыл бұрын
Use a sensor motor an you can crawl with it
@dennis3004psp 2 жыл бұрын
run a sensored system like a castle
@chadlunsford6730 3 жыл бұрын
Diggin the blue body on there dude!
@MatthewSimm 3 жыл бұрын
Cheers dude 😀 she's a bet worse for wear at the moment, I'm consider a heavy duty body as I break too many haha
@brentbocchetti4666 2 жыл бұрын
You've convinced me into putting this same setup in this weekend, where did you end up for gearing??
@kevinsell6459 2 жыл бұрын
Great video...my xmaxx is has the max5 and 800kv set up..wfo motor mount,wfo mod1.5 30/35 gears..wfo titanium axle shafts...dual 40mm motor fans and single esc fan...ripple killer for smooth high speed ramp hits..
@MatthewSimm 2 жыл бұрын
Wow dude, what a killer setup! I'm tossing up between the 1100kv and 800kv
@user-du4jp9tj2z 3 ай бұрын
waht km?/ h
@brandobashin4838 2 жыл бұрын
Saw that ending coming I thought to my self when you checked the mesh that sounded super loose
@Matthewstoychest 2 жыл бұрын
My first xmaxx is basically stock. At first I was running stock pinion stock spur (18/54) with proline trenchers. I absolutely love those tires but due to the weight they really put a lot of strain on the gears. So I’m now running Badlands on it and I run 18/50. My 2nd xmaxx is running a 800kv HOBBYWING motor with a WFO Mount HOBBYWING max5 esc and 1.5 mod gears 30/33
@MatthewSimm 2 жыл бұрын
I too love the trencher but they are a big strain, I've just ordered some dura trax six pack x they seem to be a good option. Also the trenchers also strain the stock steering, you'd need to upgrade the bell crank and the steering links.
@Matthewstoychest 2 жыл бұрын
@@MatthewSimm yeah that was also a big complaint of mine. Although with all the setbacks they are still one of my favorite tires because they actually let the Xmaxx be an XMaxx
@SpeedSyko 2 жыл бұрын
IVE NEVER SEEN A XMAXX DO A TRIPLE STANDING BACKFLIP?! WOW!
@MatthewSimm 2 жыл бұрын
Haha, I love doing it, it's probably not great for the drive train but oh well
@redblue40rc33 2 жыл бұрын
I have the same hobbywing combo ESC n motor in my hobao tq7 conversion 1/8 buggy.....all 4 tires spin no problem....hopefully I'll hit the 💯 mph one day.....they said it'll do it no problem, gotta build my spool drive shaft for speed runs...no oiled diffs for speed runs
@MatthewSimm 2 жыл бұрын
Wow nice bro! You should video it 😀
@josereta2321 2 жыл бұрын
You have the links too all the parts you installed…. Awesome video
@timmytfpv7316 2 жыл бұрын
Sweet rig question for you im looking for more air control not worried about top speed i have a spectrum160 amp esc would this motor 1650kv get the job done yours was ballistic what gearing were you running ? Thanks in advance
@cjchannel12RC Жыл бұрын
Cool video, Wow almost 60mph out of an X-Maxx that's crazy! i have owned 2 X-Maxxs' in my lifetime so far both were stock systems but i plan to run either a Hobbywing Max 6\1,650KV Combo or Max 5 G1 or G2\1,100KV Combo if they'll still make them or a Spektrum Firma 160\1,100KV combo in mine someday.
@justincase948 3 жыл бұрын
Love the Xmaxx I have 3 of them and it’s the toughest Rc I own . I also like the proline pro 4X4 and the proline fusion are great RCs 👍👍
@MatthewSimm 3 жыл бұрын
Oh nice dude! 3 xmaxxs all build differently?
@justincase948 3 жыл бұрын
@@MatthewSimm ya I have one that is a shelf queen cause it has every piece of aluminium u can get for it but it’s so heavy u no . But the other two are bash kings , I have a 800 kv in one that is just to fast fast and the other is stock and I really want to put the 1650 kv in it next but the Xmaxx is the best Rc out there 👍👍
@MatthewSimm 3 жыл бұрын
Thats heaps cool dude! I'd love a shelf queen too but I just can't help myself! Haha
@georgepace1145 2 жыл бұрын
Hi mate try turning down your break's on the ESC. I run 24 pionon gear 46 spur gear with Max 5 ESC. I'm running the same motor and ESC in my KRATON 6s 1/8 and it's crazy insane on 8s. I've made my own braces and I don't bend chassis anymore. I'm a retired mechanic and been playing with these toys for a long time mate.. great video mate love the stand still backflips 🤣😂😁👍
@VetteWay2Fast 7 ай бұрын
Curious if that system improved the rotational capability. Double backflips off a ramp? Would love to see that!
@kaubut0145 Жыл бұрын
Hey! Does the legend answer? I have a question. I got the Xmax and just purchased the Max6 combo with 1100kv. What’s the best pinion and spur combo? I was going to do 30/25 1.5 but everyone was saying not to I’ll burn the Max6. Also going with the reef triple 7 servo if that matters. What do you recommend? Thanks for all your great videos.
@coolhawk2003 Жыл бұрын
Love km.. Great video
@slopedope9056 Жыл бұрын
Hows the durability factor ? I see this was done over 12 months ago and was just wondering if your still running this set up. I really like the size and weight of the max 6 and 1650kv over the 5 and 1100kv. Need a follow up vid. I cant make up my mind on which way I want to go. Keep up the great work mate.
@10krms54 2 жыл бұрын
How was the temps on motor with 8s. Is the motor ment to handle 8s , what motor heat sink ur using. Nice monster xmax
@dewminserasinghe205 2 жыл бұрын
Hi. I have a small question. I need to buy a x Maxx after that I need to put two motors to make it 300a can we put 2 150a esc with motor.
@ipperurc5216 2 жыл бұрын
Awesome!
@MatthewSimm 2 жыл бұрын
Thanks dude 😀
@graysenetherington6074 2 жыл бұрын
I’ve been wondering what is better castle or hobby wing 1650kv motor
@johngantner9314 3 жыл бұрын
dang that servo set up looks great! ive gone threw 2 2085x servos. the snow killed em
@MatthewSimm 3 жыл бұрын
Thabks dude and that really sucks bro. The savox isn't cheap but I've heard really good things, you can also get a water proof one which I've linked in the description 😀
@johngantner9314 3 жыл бұрын
Thankyou
@eggmanfn 2 жыл бұрын
Absolutely insane had a 1650 in my erevo and being my only car had to switch back to stock way to crazy for me
@chrisgonzales153 2 жыл бұрын
Learn to finesse the power
@blaisehimelrick1285 Жыл бұрын
Hi im trying to put a max 6 1100 kv combo in my xmaxx. What spur and pinion are the best?
@Sheldinator Жыл бұрын
I dont understand kv at all so im gonna ask. Why do some big motors have low kv and be considered better than an xmaxx stock motor for example?. Would a 800 kv motor be faster and better for backflips better than stock or would something with higher kv than stock be better? And why and how
@donbush9091 Жыл бұрын
Very sweet
@jarroddurham6210 2 жыл бұрын
Hobbywing max5 esc paired with 800kv motor. Wfo 1.5mod gears 18/35. Wfo mount, and battery strap holder
@MatthewSimm 2 жыл бұрын
That sounds sweet dude!
@dooronron69 2 жыл бұрын
I bought all the same mods in this video before watching the video except I got the max5, not max6, yet to fit it all as I've also bought every green alloy part available, just waiting on the diff covers then I'll put it together
@Muzzieterminator 2 жыл бұрын
Sir, what battery are u using , which brand. How much volt. And what size gears?
@primusvlogs6626 2 жыл бұрын
Hello big fan, just wanted to ask a question where did you get the pinion and spur gear? Thanks!
@TirolChris71 4 ай бұрын
Hello, nice Car😎 what is the difficult to the Hobbywing 1250kv?
@antoniolucas3305 2 жыл бұрын
That is a rill monster !!!!!!
@MatthewSimm 2 жыл бұрын
Oh yeah 😎
@antoniolucas3305 2 жыл бұрын
I'm think of getting one this Christmas or the arma 8s out casts I like that red monster love that red !!!!
@gscubing2161 2 жыл бұрын
hi what motor mount should i buy to put hobbywing 1650kv motor in x maxx 6s?
@jaecurry835 2 жыл бұрын
If you see this what gearing you prefer for a stock motor and max6 esc set up
@BigCheese85 3 жыл бұрын
Looks a great set up. Would you advise removing the wheelie bar? My Xmaxx is stock for now.
@MatthewSimm 3 жыл бұрын
Thanks dude and it's totally up to you, I prefer it without the wheelie bar but it's just a personal choice 😀
@rcuintheshed6981 3 жыл бұрын
Bro those fans it sounds like a jet winding up holy S@#T DUDE 93KLM well done 👊👍💯
@MatthewSimm 3 жыл бұрын
They do haha! Kept her nice and cool even on 8s! Cheers brother 😀
@chef.papa.6tango523 5 ай бұрын
Surprised you didn't have to trim the servo a bit to fit. I had to do that with mine
@MatthewSimm 5 ай бұрын
Using the same servo or a different one?
@johnnyhaberfield721 3 жыл бұрын
My imaginary x max would be pretty much the same as yours,double standing backflips and all. ✌
@MatthewSimm 3 жыл бұрын
Thanks bro 😀
@oscarmike131 2 жыл бұрын
Or is the max8? Is there a max8 esc from hobbywing?
@lucasmartens6996 2 жыл бұрын
Matthew! Did you have to modify the gpm servo mount at all? I bought the exact same servo mount from gpm for my xmaxx and the servo doesn't line up with the bearing on the end of the servo horn. Did you have this issue?
@MatthewSimm 2 жыл бұрын
No I didn't have this issue sorry dude, I was a bit hard to align but it fits. I had to cut the plastic at the front of the servo area but that's because my servo stuck out a bit at the front. Maybe you slightly bent the front bulkhead just enough to change to position?
@lucasmartens6996 2 жыл бұрын
Thanks for the feedback, it lines up with everything and I can screw it down but the servo horn won't line up with the support bearing when putting the front half back on. Forcing it was unsuccessful lol. Might have to settle for the traxxas mount instead
@adamdatson4646 2 жыл бұрын
What a weapon!!
@MatthewSimm 2 жыл бұрын
I might need a gun license for it haha 😉
@adamdatson4646 2 жыл бұрын
@@MatthewSimm haha What servo mount did you use?
@johngantner9314 3 жыл бұрын
what was the part number for the gpm steeting upgrade w the steering horn in it?
@MatthewSimm 3 жыл бұрын
It is TXMS024-B
@Jsbs1991f 2 жыл бұрын
Do you think the max6 would be good for a erevo 2.0? I plan to do bashing and some speed runs or should I just just get the max8. I'm building it up, so I don't have any electronics yet.
@MatthewSimm 2 жыл бұрын
Hey dude, I personally love the max6 and haven't needed a max5 even in the xmaxx so I don't see why a max 6 wouldn't be perfect for a erevo 😀
@jasonrojas2176 2 жыл бұрын
Do you need that motor mount to put the 1650kv motor
@jfrc2382 2 жыл бұрын
awesome video mate! how does does the hobbywing motor compare to the stock 8s motor? I already have the esc just don't know if I should get the motor
@MatthewSimm 2 жыл бұрын
I love it bro, but, you don't want to gear up much if at all. I find the max6 will struggle with amp draw if gearing too high, also the stock heatsink and fans fit straight on and do a great job keeping it cool. With this setup, you don't really need 8s for bashing, but man it's fun haha 😆
@SoldierBoy3064 Жыл бұрын
nice... I'll get these parts
@readeracingRC Жыл бұрын
Excellent video. Love the build and not much babble. Little is ok with just (heads up) or facts that I can use. I don't wanna hear about their personal life. I watch videos to expand my knowledge about the world of bashing. Keep up with the videos. New to your channel. Have Fun.
@MatthewSimm Жыл бұрын
Hey thanks for that dude! Welcome 🙏
@mikepasquale7415 3 жыл бұрын
Nice work buddy…
@MatthewSimm 3 жыл бұрын
Thanks Mike!
Jason Perrin RC Vlogs
Рет қаралды 11 М.
Oscar's Funny World
Рет қаралды 19 МЛН