Treadle Lathe Build (Start to Finish) Using Hand Tools

Рет қаралды 194,510

Күн бұрын

This video is a compilation of 15 videos, 2000 + hours of film and 7 months in the shop. I hope you like the project!
Treadle Lathe Build Series: • How to build a Treadle...
Subscribe: / @lastingbuild1373
Music: www.epidemicsound.com
More LastingBuild Videos:
Channel Trailer: • The LastingBuild chann...
How to Drawbore: • Drawbored Mortise and ...
French Cleat Tool Wall: • French Cleat Tool Wall...
How to dimension lumber with hand tools: • Dimensioning lumber wi...
Paul Seller’s Workbench Build: • My Paul Sellers Workbe...
Pizza spatula(Peel) build: • Handmade wooden pizza ...
Timber Frame Arbor Scale Model: • Timber Frame Scale Mod...
My Favorite Tools:
Wood is Good 20 Ounce Mallet
www.amazon.com/gp/product/B00...
Wood is Good 18 Ounce Mallet
www.amazon.com/gp/product/B00...
Wood is Good 30 Ounce Mallet
www.amazon.com/gp/product/B00...
Stanley Sweetheart Chisels
www.amazon.com/gp/product/B00...
Stanley #4 Bench Plane
www.amazon.com/gp/product/B00...
Stanley No.62 Low Angle Jack Plane
www.amazon.com/gp/product/B00...
Stanley Marking Knife
www.amazon.com/gp/product/B00...
Husqvarna 13” Wooden Hatchet
www.amazon.com/gp/product/B00...
Dewalt 20 Volt Drill and impact driver
www.amazon.com/gp/product/B00...
Disclaimer: LastingBuild is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means to earn fees by linking to Amazon.com and affiliated sites.

Пікірлер: 235

@lastingbuild1373 3 жыл бұрын

Thank you for watching! If you like this project and style of video, I think you will also like this one. In this video, I built a traditional carpenters toolbox and may be my favorite film that I have created! kzfaq.info/get/bejne/Y86AqZiQttmzfqM.html

@ahmdabdallah5811 3 жыл бұрын

God has said in the Quran: { O mankind, worship your Lord, who created you and those before you, that you may become righteous - ( 2:21 ) [He] who made for you the earth a bed [spread out] and the sky a ceiling and sent down from the sky, rain and brought forth thereby fruits as provision for you. So do not attribute to Allah equals while you know [that there is nothing similar to Him]. ( 2:22 ) And if you are in doubt about what We have sent down upon Our Servant [Muhammad], then produce a surah the like thereof and call upon your witnesses other than Allah, if you should be truthful. ( 2:23 ) But if you do not - and you will never be able to - then fear the Fire, whose fuel is men and stones, prepared for the disbelievers.( 2:24 ) And give good tidings to those who believe and do righteous deeds that they will have gardens [in Paradise] beneath which rivers flow. Whenever they are provided with a provision of fruit therefrom, they will say, "This is what we were provided with before." And it is given to them in likeness. And they will have therein purified spouses, and they will abide therein eternally. ( 2:25 ) Quran

@pcpjames 2 жыл бұрын

And if I’m not mistaken, I believe this is what we call a beautiful man!

@RickyHarline 4 жыл бұрын

How this doesn't have several orders of magnitude more views I have no idea. This is one of the coolest woodworking videos I've ever seen.

@lastingbuild1373 4 жыл бұрын

HaHa! That was a very generous comment and it's much appreciated. I obviously hoped this video would have done better but it just never really took off!

@cloviscerda2823 2 ай бұрын

A luxury pole lathe!! You look very focused and patient. Great job.

@timspringer6616 Жыл бұрын

Thanks…true artistry

@jdwallace6312 3 жыл бұрын

Much respect to you, sir! I bet you don’t have any trouble falling asleep, lol.

@lastingbuild1373 3 жыл бұрын

Thank you! No issues lol!

@LethiuxX 3 ай бұрын

Great video and nice design! I know it would be extra work, but subtitles explaining what you're doing and maybe even including dimensions would be amazing. Still really fantastic though, great work!

@lastingbuild1373 3 ай бұрын

Ok, thank you

@simonlevett4776 2 жыл бұрын

Wow, what a fantastic build. Bearing in mind that you made it without using any power tools, you have created something remarkable. It's a tour de force, the like of which i have never seen before. All the best from the UK.

@Za-CAMNEM 8 ай бұрын

Редкий случай, когда видишь, что сегодня в этом мире всё ещё есть люди, кто способен собрать нечто серьёзное, причём судя по всему без единого гвоздя в конструкции.. Мастеру моё искреннее уважение... Кстати уважаемый, а чертежи изделия можно увидеть, если конечно это не коммерческая тайна? Какова себестоимость общих затрат?

@jasonspencer590 3 жыл бұрын

This guy is a Wranglerstar fan. Beautiful craftsmanship. Great video!

@lastingbuild1373 3 жыл бұрын

Thanks a ton!

@firebomb5510 4 жыл бұрын

Carpenter here for 35+ yrs... I've realized,that if the lights go out in this country... Brick Mason's(if they know how to make old brick,and know how to mess with stone... Carpenters,Plumbers....could easily survive and build this country without electricity...

@oldmanfromscenetwentyfour8164 4 жыл бұрын

Some of them yes. Maybe then the Trades will be respected again and not treated like we're "Unskilled Labor".

@kevingraves7431 4 жыл бұрын

@@oldmanfromscenetwentyfour8164 I don't pay 'unskilled labor' $100+/hr.

@oldmanfromscenetwentyfour8164 4 жыл бұрын

@@kevingraves7431 Who do you pay $100 per hour to?

@kevingraves7431 4 жыл бұрын

@@oldmanfromscenetwentyfour8164 It is fairly common around here. $60/hr is pretty much the bottom. Although, I guess you could find cheaper. But I am always a proponent of 'you get what you pay for'.

@oldmanfromscenetwentyfour8164 4 жыл бұрын

@@kevingraves7431 Where are you? I'm moving there!

@Moisandranat Жыл бұрын

Огонь вообще!!! Мужик ты молодец 👍👍👍

@stubowl1 2 жыл бұрын

excellent work

@jt659 4 жыл бұрын

I've been thinking about a treadle lathe and other such off-grid machines. This is perfect, both functional and beautiful. Thank you so much for the inspiration!

@lastingbuild1373 4 жыл бұрын

Thank you!

@user-gy8zc1kz3n 3 жыл бұрын

Very good bro!!!Watching is from Russia!!!💪👏

@lastingbuild1373 3 жыл бұрын

Welcome! Thanks!

@joeyc66 2 жыл бұрын

ASMR wood building 🤯

@Sp1S Жыл бұрын

Dude, that looks awesome 👌

@carlogle6207 11 ай бұрын

Amazing 👏

@eedeh1 3 жыл бұрын

Great job.

@user-qm6ds2vr4z 4 ай бұрын

Travail d'orfèvre superbe j'aimerais avoir les mêmes compétences pour réaliser un tour comme ça...👏👏👏👏👍

@lad208 3 жыл бұрын

Thankyou for these video i'm 17 ,starting woodworking i use only handtools because they are amazing and not so expensive, very helpful video, i will make mine soon ☺

@valveman12 5 ай бұрын

How to use a lathe and get a workout at the same time. Nice lathe!

@georgerogers2120 3 жыл бұрын

Wonderful work! Well beyond my abilities as a craftsman, but definitely a goal to aim for!

@austinhoward7413 Жыл бұрын

a treadle lathe that is actually worth a darn very welly done sir your work is well engineered designed as well as very functional

@oakenarm Жыл бұрын

Jim your skills are next level sir. I have watched the vid twice now. Well done.

@marciogalafasse116 4 жыл бұрын

Parabéns , muito bom!

@johncharleson8733 Жыл бұрын

Inspiring work and video (minus the somewhat drippy background music)---I loved it.

@callmemrbombastic1903 3 жыл бұрын

A lost art that I strongly believe is going to make a strong come back! Emphasis on the word strong!

@lastingbuild1373 3 жыл бұрын

Thanks!

@rickolson9011 5 жыл бұрын

Heck for stout! Thanks for showing it in action! Well done!

@lastingbuild1373 5 жыл бұрын

Thanks Rick!

@karendavis6838 4 жыл бұрын

Absolutely Beautiful.

@matko101000 4 жыл бұрын

Incredible work! This lathe will last ages.

@Sweethomecookbook 11 ай бұрын

Absolutely fantastic video.

@hilloliver 5 жыл бұрын

Well done, Jim! Kudos!

@lastingbuild1373 5 жыл бұрын

Thank you!

@wilwazka2957 Жыл бұрын

Wood and patience, leading to great results. Nice job.

@user-hf9jx4yq2z 4 жыл бұрын

Just loved it. The process of transforming a log to a something is amazing..... with hand tools

@yuyo57 4 жыл бұрын

WoW...Nice Woodworking project.

@lastingbuild1373 4 жыл бұрын

Thank you!

@user-sm3ld8rw7e Ай бұрын

😊una belleza ésa máquina 😊

@mirkomaleni2769 2 жыл бұрын

how can you not like this video

@alexgehales 4 жыл бұрын

You deserve a big like,

@royalmaster203 2 жыл бұрын

very nice

@Enchantedlight_20_13_ Жыл бұрын

Perfect! Thanx for inspiring everyone! For an powersource an Old bicycle would Do the Job as well or even better, with less latency of the power supply!

@johnjackson9767 5 жыл бұрын

I just bought my first house and have been watching a lot of home renovation and wood working videos to get an idea of where to start. There's something compelling about wood working with only hand tools that I never thought about before. Thanks for the vid, and great work.

@lastingbuild1373 5 жыл бұрын

Thank you! Last year my woodworking goal was to become comfortable with hand tools and between my workbench and lathe, I learned a lot! Thanks for watching!

@gurmaildhiman7827 4 жыл бұрын

You are the master of the woodwork, good idea

@pchelka_c_chelkoi 4 жыл бұрын

Work without fuss and noise. I just rested while watching the video. Thank you for the wonderful content and great work.

@lastingbuild1373 4 жыл бұрын

Thank you!

@kevinbeachus6988 4 жыл бұрын

Beautiful video, shows what can be achieved using hand tools, patience, and a massive amount of talent. Not something I would ever build, but the best thing I’ve watched for a long time

@jraglob5924 4 жыл бұрын

Very nice, art and function, love all the hand tool work!

@stevenrayhoward 5 жыл бұрын

Awesome craftsmanship & dedication. When I grow up I hope I might be half as good. Beautiful machine! Brings back very fond memories of my grandfather. Thank you.

@lastingbuild1373 5 жыл бұрын

Glad you like! Thanks for watching. You might enjoy watching the videos on making a firewood mallet on the treadle lathe!

@gonzalomauriciolara9931 4 жыл бұрын

Que hermoso trabajo, lo felicito, saludos desde Chile.

@mrhobbs5713 3 жыл бұрын

Love the hand tools. Craftsmanship has been lost lately with the new power tools.

@NikosDIY 5 жыл бұрын

Wow this build is so amazing! Brilliant! Congrats for the craftsmanship and patience to make it. Subbed!

@lastingbuild1373 5 жыл бұрын

Welcome! Thanks for watching!

@markgoode4109 4 жыл бұрын

Outstanding build and great attention to detail. Thanks for sharing your ideas and obvious skills with us. Best wishes.

@alexisdias7997 4 жыл бұрын

hermoso trabajo, saludos desde Venezuela.

@ChansonOrpheline Жыл бұрын

Very nicely done - thank for sharing this!

@edwinleach7401 4 жыл бұрын

Beautiful work of art. Thanks for video.

@husshuss1874 2 жыл бұрын

Amazing job

@kennethkustren9381 4 жыл бұрын

A 25# weight plate, and 5spd sheave, and this coulda been usable. KIDDING..., but,... just mostly. Great Works !!! Subscribed !!

@cedricburg8374 4 жыл бұрын

Beautiful!

@alexisdias7997 4 жыл бұрын

Muy interesantes tus proyectos un afectuoso saludo desde Venezuela

@Patriottoo2 5 жыл бұрын

Metal pulleys? Geeesh! :-) Lots of work pays off in the end. Nice!

@lastingbuild1373 5 жыл бұрын

My intention has been to make some wood ones once I get more time on the lathe. Thanks for watching and commenting!

@ronhyer1956 4 жыл бұрын

How amazing. You are so,so respected! Thank you so much for this video so we could witness your skill.

@anekcem 4 жыл бұрын

fantastic job. I really like it, congratulations !!!!!!

@christianpusey2791 3 жыл бұрын

Superb & beautiful! Very well done, indeed!👍👏🤘✌💜🙏

@vikassm 4 жыл бұрын

Fantastic!

@lastingbuild1373 4 жыл бұрын

Thanks a bunch! If you like, I bet you will also like this: kzfaq.info/get/bejne/Y86AqZiQttmzfqM.html

@JDK45ACP 4 жыл бұрын

Wow, man! Amazing work. Thank you for sharing, Brother.

@lastingbuild1373 4 жыл бұрын

Uncle JD thanks a bunch! I appreciate it!

@daverothwell4579 4 жыл бұрын

Bloody brilliant mate! Absolutely bloody brilliant. Well done.

@lastingbuild1373 4 жыл бұрын

Thank you so much! ☺️

@rashadfoux6927 Жыл бұрын

That is beautiful. Well done.

@communicationatoz 4 жыл бұрын

Your dedication to the craft is astonding. It great to see someone do something without all the technology and equipment out there. Loved it.

@lastingbuild1373 4 жыл бұрын

Thanks!

@Mafacan61 3 жыл бұрын

you live my dream, congratulation bro.

@lastingbuild1373 3 жыл бұрын

Thank you!

@GeorgeLowrey 5 жыл бұрын

Impressive!

@lastingbuild1373 5 жыл бұрын

Thank you!

@jamesmerritt4032 4 жыл бұрын

Wow what a beautiful job

@LakeSunset4 4 жыл бұрын

Wow. Beautiful work. Very careful.

@craigtate5930 4 жыл бұрын

I especially love the treadle and flywheel mechanism

@Vikingwerk Жыл бұрын

9:00 Well thus tells me the piece I need exists. I’ve been mentally planning this same build, with extremely limited previous lathe experience, and had been debating how to deal with the drive spur. Thank you!

@hassangillani7457 4 жыл бұрын

A thing of beauty is joy for ever

@lastingbuild1373 4 жыл бұрын

Thank you!

@slothnation 4 жыл бұрын

I recently found your channel. Awesome build Sir!

@lastingbuild1373 4 жыл бұрын

Thank you!

@alanscott5942 5 жыл бұрын

Incredible what a fantastic pecie of work, ģreat film nicely presented with good background music, the concept òf using only hand tools was a brilliant idea, the sound quality of the tools cutting imeditaly transported me back to watching my father when I was a child, thank you for sharing, are there any examples of the work you have turned?

@lastingbuild1373 5 жыл бұрын

Thank you very much! I have videos of making a chisel handle and mallet so far.

@ahmdabdallah5811 3 жыл бұрын

What Is Islam? Islam is not just another religion. It is the same message preached by Moses, Jesus and Abraham. Islam literally means ‘submission to God’ and it teaches us to have a direct relationship with God. It reminds us that since God created us, no one should be worshipped except God alone. It also teaches that God is nothing like a human being or like anything that we can imagine. The concept of God is summarized in the Quran as: { “Say, He is God, the One. God, the Absolute. He does not give birth, nor was He born, and there is nothing like Him.”} (Quran 112:1-4) Becoming a Muslim is not turning your back to Jesus. Rather it’s going back to the original teachings of Jesus and obeying him

@stephenmalcome3797 3 жыл бұрын

Beautiful build and it works great

@lastingbuild1373 3 жыл бұрын

Thank you! 👍

@technicalwork9999 4 жыл бұрын

Hard working I like your work

@markgoode4109 4 жыл бұрын

Lovely wood, super design, and outstanding craftsmanship. Thanks for sharing your obvious skills and ideas. Really enjoyed the video. Best wishes.

@lastingbuild1373 4 жыл бұрын

Thanks a bunch!

@samuelobando8607 4 жыл бұрын

Hermoso

@TheSMEAC Жыл бұрын

I’ve begun planning for a treadle lathe of my own and came across your channel that way; I don’t know how I haven’t ever come across your content before. You’re into and doing the things that I’m into and your pace/delivery is right in the sweet spot for what I most enjoy too 👍. I like longer form deliberative builds over the montages and common diy click bait that seems so pervasive these days; thank you brother! Subscribed, catching up on your catalogue of videos, and I hope today has been a good one for you and yours!

@Al-ms6me 4 жыл бұрын

beautiful build bro... and I love the choice of music too. ya know what else I like... you mostly if not ONLY used handtools for this

@lastingbuild1373 4 жыл бұрын

Thanks for watching!

@TheTradesmanChannel 5 жыл бұрын

Great job Jim, camera work has gotten excellent.

@lastingbuild1373 5 жыл бұрын

Thanks man! Much appreciated!

@noblegreen2692 4 жыл бұрын

THAT IS AWESOME

@lastingbuild1373 4 жыл бұрын

Thanks, Definitely one of my favorite projects I have done!

@noblegreen2692 4 жыл бұрын

@@lastingbuild1373 I wish i had the room and space to make one but I'm living in the baracks so I dont think my room mates would agree to me having one

@S.yean.O 4 жыл бұрын

It's good! I like!

@danny117hd 4 жыл бұрын

Pretty cool stuff here

@lastingbuild1373 4 жыл бұрын

Thank you

@ramoncervantes6332 4 жыл бұрын

EXCELENTE trabajo, te quedó muy bien hecho y de un aspecto bastante agradable el torno que seguramente ideaste, te felicito por tu elaboración a la usanza antigua, así es como realmente uno aprende. Gracias por tu enseñanza "artesanal", como le llaman ahora. Un fuerte abrazo

@user-qp3pn4yk2h 5 жыл бұрын

Супер! 👏👏👏👏👏👏👏👍👍👍👍👍👍👍👍

@lastingbuild1373 5 жыл бұрын

Thank you!

@FauxtakuLounge 2 жыл бұрын

Bravo. I am not sure I can build it but I will do my best to try something like this.

@mauriciomonje5228 4 жыл бұрын

Hermoso trabajo!! Tienes los planos?

@JoelWetzel 4 жыл бұрын

This is inspirational. I noticed your use of the Japanese rip saw and want to pass along that the footage I've seen of them in use over there shows a vertical stroke, pulling down. I'm going to learn to use my double-sided Japanese saw and will go about it in this way. If there's much difference in my ability to cut to the line then I'll update you. Thanks for making and posting the video, BTW. Peace.

@lastingbuild1373 4 жыл бұрын

Joel Wetzel thanks!

@L3ttuc3 4 жыл бұрын

Those pull saws have become so popular in the past couple years lol. I was given one ages ago and felt so cool being the only one around with one, and now they are one of the single most common woodworking tools I see. You'll have no issues with it though, they are just super easy to get proficient with and so so versatile. It cuts close and accurate and will be saving you tons of time before long.

@walterrider9600 4 жыл бұрын

thank you and wow

@invictusvallaro3865 Жыл бұрын

Brutal

@jonanderson5137 4 жыл бұрын

Looks like you're using a pipe clamp as a load bearing face on the headstock. Might want to look into sone hardened races and needle bearings to alleviate undo/uneven wear

@canaldoportugues10 Жыл бұрын

Sem palavras, só apaixonado por trabalhar com madeira, tenho um torno e faço umas coisas ,aprendi um pouco de profissão de carpinteiro, mas fui aprendendo também profissão de marceneiro ao longo dos anos ,posso não ter a capacidade de trabalho que você tem mas sei avaliar um bom ,MARCENEIRO mesmo com ferramentas de ótima qualidade você se manteve no padrão de um marceneiro da antiga escola ,parabéns foi um ótimo trabalho e adorei cada momento que estava vendo ,continue com essa paixão pela arte de trabalhar com madeira, pois ela está sumindo,abraço 💯💯💯💯💯💯💯💯💯💯💯💯💯💯💯💯💯💯💯💯💯💯💯💯💯💯💯💯💯💯💯👌👍🤝

@RobMods 4 жыл бұрын

Really impressive work mate. As a you-tuber myself, I'm guessing there's at least as much, or probably more time spent video editing as there was woodworking. Congrats...

@shademe 4 жыл бұрын

Absolutely a beautiful piece of art! Amazing thank you for your time and effort in making this video to share. I have one question, does your leg get tired ? Thanks again.

@lastingbuild1373 4 жыл бұрын

It’s definitely a good workout! 😓😓 but equally fun to use!

@wiscgaloot 3 жыл бұрын

Fantastic! If I ever build one, I think I'll follow this plan, but make it longer. I'd want to make Windsor chairs and that doesn't look long enough to handle all the spindly bits.

@lastingbuild1373 3 жыл бұрын

Thanks! You could definitely lengthen it to your needs!