Рет қаралды 92,726
The TrenchIt TCT AG Trencher has been designed for use in the drainage of agriculture and horticultural land. It is a 3-point linkage attachment suited to most tractors from 40-60HP with hydrostatic transmission or creep gear box. Tractor mounted trencher attachment.
It is a very efficient way to drain your fields, it works out to be a fraction of the cost of a contractor coming in and doing the work, it can be hooked up to the tractor in a matter of minutes and ready to work!. The TrenchIt TCT AG tencher can be fitted with laser equipment to make the trench levels perfect every time.
ADVANTAGES
- This is a PTO driven trencher.
- Driven via a reduction gearbox and chain drive this allows an optimum digging speed.
- It is designed for tractors with horsepower (HP) from 40 - 60HP with hydrostatic transmission or creep gearbox transmission that does not exceed 0.3 kph or 0.12 miles/hr.
- Low maintenance machine, built to last and made in New Zealand.
FEATURES
- DIGGING DEPTH: Up to 1200mm with various chain options
- DIGGING WIDTH: 150, 200, 250, 300mm
- WEAR PARTS: Quality USA trenching parts, with tungsten carbide cutting teeth.
- SLIP CLUTCH: This protects tractor and trencher from undue shock.
- CRUMBER BAR: Grades trench as you go.
- CRUMBER SHUTE: Feeds pipe as you go.
OPTIONAL EXTRAS:
- SPINNING GENIE: Unwinds pipe and feeds it into crumber shute.
- LASER MOUNTS:Attached to crumber bar for automatic or manual laser control.
Want to find out more? Email us trenchitnz@xtra.co.nz or call Matt Cooney 0800 873 624 (TollFree NZ) or +64 7 578 1612 / 027 289 7101
See our website www.trenchit.co.nz