How to Install Pods

Рет қаралды 13,330

Жыл бұрын

Tracker Grizzly 1848 pods install. This was a cool little project. As always it turned out great! I did have a little trouble with the top inside corner joints, but we got it straightened out. Its wierd they dont run the transom braces all the way across. They were literally only where the motor was mounted. This is a cool boat. I wish I could have water tested it, but no time for it. Incase anybody was wondering this job was $550
Thanks for watching!
Follow Tricked Tins on my other social media accounts for giveaways and special offers👇
bit.ly/TRICKEDTINSFACEBOOK
bit.ly/TrickedTinsJonboats
www.TrickedTinsJonboats.com
Follow my Videographer👇
/ ricomarcelophotography
/ ricomarcelophotography
/ _rico_marcelo
Follow SBFISHINGTV👇
bit.ly/sbfishingtv
My brothers company check him out👇
bremmystrong?ig...
bremmyproducts.com/2Y=
bremmyproducts.com/

Пікірлер: 50

@onenutt2940 Жыл бұрын

Look forward to seeing your videos!!

@MichaelCraig-bi3wj Жыл бұрын

Another great job, dig your videos the most. I watch other builds and they don't compare. Keep up the good work!!!

@valkyrie6926 Жыл бұрын

I enjoyed this video! Very educational! 👍

@NSKINGS420 Жыл бұрын

It's cool seeing you get down on your craft 🤘🏽💯🦅

@TRICKEDTINS Жыл бұрын

Thanks brotha

@ptart7651 Жыл бұрын

Another banger!

@thomascassell7537 Жыл бұрын

I cut 2 damned good tape measures off when I first started on a sheet metal shear...love the video, thank you. God bless- get back to work! Momma needs it!

@TRICKEDTINS Жыл бұрын

It happens daily lol!

@thomascassell7537 Жыл бұрын

I am working on my transom and going to build pods, with the choices and prices out there, what tig did you choose and why

@calvinhandy3969 Жыл бұрын

Stacking dimes 💯

@bruce7992 6 ай бұрын

Nice Video, I learned a few things. Thanks

@TRICKEDTINS 6 ай бұрын

Awesome man. I learn new stuff everyday! Love sharing.

@rodconner9079 Жыл бұрын

Nice!!! Be Safe

@kencleg7721 8 ай бұрын

My express cracked at the main support bracket and hull x2 just weld it back up and rock on I also 3”alum angle hammer d out a bit ran down the Kiel so I can beach it I’ve cracked into x2. Pretty hard on it but in all after 20 years she’s been a great boat still my primary fishing hunt rig w 60 Yamaha tlra 2 stroke 02 so she’s a 200 lb 60 hp if I put a 90 on it I would probably need pods 1680 Has Avery camo rack system to. Over her up.

@TRICKEDTINS 8 ай бұрын

Nice rig

@maddgoatee9708 Жыл бұрын

Ya, that front water scoop and dipped deck. That would be annoying. Heavy motor for that partial transom. I would spent a little more and have a full transom installed. Clean install and welds.

@thomascassell7537 Жыл бұрын

I love your intended guide, the American icon...

@TRICKEDTINS Жыл бұрын

Thanks brotha i appreciate it. I'm just a regular guy trying to figure life out! Nothing special.

@rumnboats7612 Жыл бұрын

Thinking about adding boxes and plating my 60ho up still runa prop. I have a grizzly 1860 and it has a full transom that is for sure cored, also the boat is not bent down or in at the front like that boat is, also those white foam blocks are not factory, stuff has been removed my dude.

@TRICKEDTINS Жыл бұрын

Sounds good, good luck with the build.

@tintdr Жыл бұрын

1648neess pods, and a front mount for a trolling motor

@keithdaniel3405 Жыл бұрын

Fantastic video and walk thru. Do the pods add any strength to the back since is metal sheeting. To me it seems when it is in the water, that would add an upwards stress. Am I wrong and over thinking and the damn things make it more sturdier all around? Educate me. Those will really look nice if he paints them up as well. As always, great video.

@TRICKEDTINS Жыл бұрын

Thanks. Yes, it adds support and helps with buoyancy. They are tricky tho. It has to have the perfect weight distribution or the pods will work against you.

@daniellanier9090 Жыл бұрын

Stacking dimes like crazy.

@stanmitterer1302 Жыл бұрын

Nice work! Are you in VB? What would you charge for something like this? Pods only.

@TRICKEDTINS Жыл бұрын

Thanks my shop is in norfolk. Around $600

@benfazerson Жыл бұрын

Do you think it's possible to add pods to a fiberglass skiff it's a 14 foot and could use the extra flotation was thinking to powdercoat them and thrubolt them on with 5200 to seal the holes properly in theory I could see it helping alot but nervous to open a can of worms lol

@benfazerson Жыл бұрын

Would really appreciate any and all opinions/advice boat has been a learning experience I've built it from a plain hull to a badass little skiff always looking to improve and learn more

@TRICKEDTINS Жыл бұрын

I definitely advise against bolting on pods. If it fiberglass why not fiberglass them on?

@BrokeBackBob4559 Жыл бұрын

Could you of taken a piece of flat steel and put against the foam and then taken a car scissor Jack an placed the foot of Jack against the transom to put out the bow until you got it welded in place?

@TRICKEDTINS Жыл бұрын

Not a bad idea. Its tight quarters in there.

@BrokeBackBob4559 Жыл бұрын

@@TRICKEDTINS the scissor Jack I have stands 3 and 3/8 inch tall fully collapsed

@tintdr Жыл бұрын

Whats your schedule look like 1st week of December??

@TRICKEDTINS Жыл бұрын

Idk yet. Send me an email professionalwelding@gmail.com

@ZinoxOneWay Жыл бұрын

Are the Pods strong enough to where you could mount the Trolling motor or a talon on the pod?

@TRICKEDTINS Жыл бұрын

Solid as a rock. I would recommend reinforcement for talon, or tm tho.

@ZinoxOneWay Жыл бұрын

@@TRICKEDTINS sweet thanks, used to work in a big metal shop, unfortunately i don't have access to all the great equipment anymore, but watching you work brings back a lot of great memories :D

@thomaslangdon1436 9 ай бұрын

What filler rod are you using and number

@TRICKEDTINS 9 ай бұрын

4043 3/16"

@Deere1050 11 ай бұрын

What is your welder setup?

@TRICKEDTINS 11 ай бұрын

We have tons of welders. I use a Dynasty 210

@Nuts2butts Жыл бұрын

How much do you charge to mount a small set of beaver tail pods?

@TRICKEDTINS Жыл бұрын

$450

@MrShankspony Жыл бұрын

@TRICKED TINS do you remember what size pods those are? MEDIUM?

@TRICKEDTINS Жыл бұрын

I think so. Fyi, i ended up cutting them off! The customer spent over a grand to end up where he started. Pods are tricky!

@MrShankspony Жыл бұрын

@TRICKED TINS Oh wow! What was the reason to remove them?

@christopherpaige406 11 ай бұрын

Why do everyone look for speed out of a jon boat???

@TRICKEDTINS 11 ай бұрын

These guys fish tournaments. Fastest boat gets to pick the 1st spot

@christopherpaige406 11 ай бұрын

@@TRICKEDTINS I understand them speed dating fish guys but it's not just them. I've used a jon boat all of my life and never been full tilt. In using a 5hp Merc right now and thoroughly enjoy it because it's better than a troller which is better than paddling which is better than hoping the tide turns