How to Install 3.5 Inch LCD on Raspberry Pi - Super Easy Way (In 3 Minutes)

No video

How to Install 3.5 Inch LCD on Raspberry Pi - Super Easy Way (In 3 Minutes)

Рет қаралды 622,090

Күн бұрын

Let's see how to install any 3.5 Inch LCD screen on Raspberry pi in just few minuets , i am sharing the super easy way to install the touch screen on pi. The LCD i am using in this tutorial is "Geekcreit 3.5 Inch 320 X 480 TFT LCD Display" i got this LCD from banggood.com.
Buy 5 Inch LCD Display here: fas.st/uSNK7L
This is a GPIO based LCD screen for pi which is easy to be install , all you have to do just plug the screen to the GPIO pins and power up your pi. Then you will find your lcd is nit working , there is only white screen. To fix the white screen problem you have to connect your HDMI monitor to pi and you have to put some codes in the terminal.
▶▶ LCD Installation Code: trickiknow.com...
After installing the LCD you will not be able to get the display on the monitor , in my video i am also showing how to get display back to the monitor from LCD.
▶▶ 7 Inch touch screen LCD for Pi: • Cheap 7 inch Touchscre...
▶▶ 5 inch HDMI LCD on Raspberry pi 4: • How to Install 5 inch ...
▶▶ 11.6 Inch touchscreen Raspberry Pi 3 display: • Raspberry Pi portable ...
▶▶ New Raspberry Pi 4 review for starters: • Raspberry Pi 4 - How t...
▶▶ Raspberry Pi 3 Tutorial for Beginners: • Raspberry Pi 3 Tutoria...
🎤 Audio in this video is recorded with Rode NT-USB
▶▶ Watch Video : • RODE NT-USB: How to Se...
Hope you like to learn the installation process , thanks for watching my video guys. If you have any questions please ask in the comment section and if you are new to my channel please subscribe my channel for more tech tips.
▶▶ If you Like my video plz SUBSCRIBE : bit.ly/Subscrib... ❤
DISCLAIMER: This video's description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission and you lose nothing. This help support the channel and allows us to continue to make videos like this. Thank you for the support!!

Пікірлер: 828

@TrickiKnow 6 жыл бұрын

*IMPORTANT:* The Success ratio of this method is 90% , few LCD are not working. Please Please Please make sure to *backup* your important files or do this experiment in a fresh memory card. If you have any *questions* please ask below , Check out New *Raspberry Pi 3 Tutorial* for Beginners: kzfaq.info/get/bejne/ZpZoZ8WLy7erY58.html 😍

@jayhayes7162 6 жыл бұрын

TricK i Know what if I use the retropie operating system???

@luizhenriquemarinho4176 5 жыл бұрын

something went wrong when i restarted raspberry pi, the screem stills write and i cant code, when i plug off the source and plug in it stills write, What shold i do?

@Theguywith2thumbs 5 жыл бұрын

What if I just simply want to use it as a hdmi screen?

@Theguywith2thumbs 5 жыл бұрын

Like for my ps tv

@Theguywith2thumbs 5 жыл бұрын

Or other gaming consuls

@muzhiwaay 4 жыл бұрын

Didn't work, now the pi won't show anything on the screen or my monitor

@baobao6993 5 күн бұрын

I’m coming I little late, but try putting in the pins correctly so that the corner in front is over the usb ports

@jessek8955 6 жыл бұрын

I would like to personally thank you for making this process as simple and as easy as it could possibly get!!!! YOU ARE SIMPLY AWESOME FOR MAKING THIS VID!!!!!!!! I cannot thank you enough!!!!!!!

@TrickiKnow 6 жыл бұрын

You are most welcome to my channel , have a wonderful day 😀

@abhijeetpatil570 5 жыл бұрын

Yessss!!! I can work with my R-Pi-3 B+ with 3.5" LCD with touch functionality. Thank you so much... For being so clear and to the point to get this working...

@jamespolland958 6 жыл бұрын

OMG! I'm completely new to this, but you just did in minutes what i've been trying to do for hours! Thank you!!!

@TrickiKnow 6 жыл бұрын

I understand your feelings, for the first time I was just like you 😀

@Siktah 2 жыл бұрын

thankyou very much. For those wondering the old Waveshare Rev A screens work with this. Thank you from Australia! I used to battle with these TFT screens years ago when they first came out!

@robb961969 3 жыл бұрын

I've been trying to get this going all night, and this is the first guide that actually works. Thanks!

@wipalo.the.artist 4 жыл бұрын

Thank you for this! I spent an entire evening fighting with the screen, you solved it in 4min!

@OKBerge-nx9nr 4 күн бұрын

This video still works for my raspberry Pi 4 with newest install of RPi OS. Thank you!

@cyberwolf5075 5 жыл бұрын

Thank you! A modern/recent video that helps me understand why my pi wouldn't work!

@TrickiKnow 5 жыл бұрын

You are welcome ☺️

@BilalKhan-do9il 2 жыл бұрын

Pro tip: enable ssh before uploading this code and make sure you connect your pi with a network before uploading this code , if something goes wrong and u aren't connected to wifi or not enabled ssh then you'll have to format your sd card .

@YouDidWhat 2 жыл бұрын

damn... wish i had of read your comment before i did this... time to format my card :(

@BilalKhan-do9il 2 жыл бұрын

@@YouDidWhat shit ,feeling bad for you man .

@ArthurDent0042 4 жыл бұрын

Clear, concise, and helpful instruction. Well done. Thanks!

@SlamDunkYaJunk 5 жыл бұрын

WOW!!!! Everywhere else i've looked, the method was extremely complicated!!! Thanks a ton!!!

@TrickiKnow 5 жыл бұрын

Welcome bro , watch my retro game console build video too: kzfaq.info/get/bejne/iNuknNOq2bHUYKc.html 😍

@gregnorris8279 3 жыл бұрын

Quick thanks from Finley, Australia. Followed your guide, job done. Working a treat. Cheers

@TrickiKnow 3 жыл бұрын

Glad it helped, thanks for watching 😊

@garryzhuang303 5 жыл бұрын

Very helpful, this was one of the best tutorials out of all the others!

@TrickiKnow 5 жыл бұрын

Thank you so much for the compliment bro , have a nice day 😆

@mwangigikonyo9546 4 жыл бұрын

If you're using the 3.5inch RPi LCD (A) V3 480x320 Pixel XPT2046 Touch controller; The file "/etc/X11/xorg.conf.d/99-calibration.conf" should contain the following values; Section "InputClass" Identifier "calibration" MatchProduct "ADS7846 Touchscreen" Option "Calibration" "3936 227 268 3880" Option "SwapAxes" "0" EndSection

@TrickiKnow 4 жыл бұрын

thanks for the suggestions

@ahmedaksu 4 жыл бұрын

There is no xorg.conf.d/99-calibration.conf in X11. Should I create a new file?

@mwangigikonyo9546 4 жыл бұрын

@@ahmedaksu Yes. But be sure to install the driver first

@retrotony4119 4 жыл бұрын

Thank you for this. I Finally got an lcd I thought I would never get work to operate.

@MikeTheMic 5 жыл бұрын

What a painless process. Works fantastic first time with no issues! Thanks

@familyplans3788 Жыл бұрын

THANK YOU !! after ages trying to get my screen to work i simply followed your instructions and i am a happy bunny , subd

@denpar5450 5 жыл бұрын

спасибо Друг. Два дня я не мог подключить экран,как только зашёл к Вам на сайт,через три минуты экран заработал.

@TrickiKnow 5 жыл бұрын

Добро пожаловать, братан, посмотрите мои новые малиновые пи видео 🙂

@vladdubrowski1058 3 жыл бұрын

Hello, it worked. I used Octopi as the operating system. Thanks

@TrickiKnow 3 жыл бұрын

Great 👍

@trailervert Ай бұрын

Thank you . That worked with my Pi3 B+ running bookworm

@fabriziofioralli354 4 жыл бұрын

Just installed in my RPI4 without problems. Really simple. I was afraid to loose the VNC desktop connection, but fortunately it still works. Thanks for all!

@brandond741 5 жыл бұрын

didn't work for me. I'm running the latest version of raspbian with recommended software and when it reboots it runs through all the logs and then freezes on "starting dhcpcd on all interfaces" and the display stays white and I have to re-flash raspbian. please help

@LouiesLog 3 жыл бұрын

At 3:38 you say "best bang for your luck" The phrase is "Best bang for your buck" :) thank you for this tutorial!

@streetsommelier6037 5 жыл бұрын

It just downloaded the codes then froze at the end. Doesn't recognize keyboard or 3.5 monitor, mouse. I unplugged it and powered back on several times only to see the couple pages of code load up and then nothing. Can't even reset or go to the menu fro retropie and raspian. It seems the sd card is corrupted somehow now and I can't get into the code because I dont have a device that can read/write on a sd that small, and the pie just freezes up on that downloaded code every time at startup. Any suggestions?

@dennisdevine9563 4 жыл бұрын

Is there a way to have screen displayed on BOTH the LCD touch screen AND the HDMI monitor? I could really use that. thanx

@pierobelderbos2101 4 жыл бұрын

kzfaq.info/get/bejne/sOClmsx6s8iXiqM.html

@dennisdevine9563 4 жыл бұрын

@@pierobelderbos2101 Thank you!

@biancaalde2909 2 жыл бұрын

Hi Dennis, the comment written by Piero has been deleted. May I know the solution for your question? I want to have my screen displayed on the HDMI monitor as well.

@dennisdevine9563 2 жыл бұрын

@@biancaalde2909 I never did get a solution

@Puggelicious 2 жыл бұрын

@@dennisdevine9563 damn I just got one too

@robrobinette 4 жыл бұрын

Worked for me, thank you very much TricK.

@TrickiKnow 4 жыл бұрын

Welcome

@YasserIsmail 5 жыл бұрын

Man, you are the best .... this was one of the best simple video I have ever seen, well done you made my day finally something working :)

@TrickiKnow 5 жыл бұрын

Thank you so much for the compliment, my good work will continue always 😀

@ax0rz0 2 жыл бұрын

Why is the screen frame rate very bad?

@kc8302 5 жыл бұрын

Thank You!!! This worked for me, you made this very simple!!!

@SomeOne-mz2qx Жыл бұрын

Thank you that was so much help

@TrickiKnow Жыл бұрын

You're welcome!

@matt.ny84 5 жыл бұрын

Do I have to do this every time I want to switch from HDMI to the LCD or LCD to HDMI? Is there a way to have the pi automatically switch when a HDMI cable is plugged in and unplugged??

@michaelsandford414 4 жыл бұрын

Any luck on this?

@ianharris9260 4 жыл бұрын

Michael Sandford I sure did it worked first time for me

@malthebenzonlyholm8638 4 жыл бұрын

i gruess you could make a ''file'' you press that would do these commands automatic :)

@rxgtv 4 жыл бұрын

Python?

@micah2936 Жыл бұрын

@@rxgtv I think you can use python to run commands in terminal

@martondobras-vincze6123 4 жыл бұрын

Thank you! Worked 100% for first try... even i installed my screen before after a reinstall i had to do it again, so this was 1000 times less pain than before! TY!

@markdavidson149 5 жыл бұрын

Awesome video, very easy to understand. Worked perfectly. Thank you!!!

@TrickiKnow 5 жыл бұрын

Welcome , subscribe my channel for more raspberry pi videos 🙂

@OnzeGameSessieHD 6 жыл бұрын

my raspberry isn't working any more, it gives a black screen with above with a " _ "

@KoljaMineralka 6 жыл бұрын

The same here, white screen

@andriiburka 5 жыл бұрын

@@KoljaMineralka REINSTALL RASPBIAN

@andriiburka 5 жыл бұрын

use BerryBoot for installing Raspbian Full and Clone it in Berryboot.. You will be able to restore your OS in a few seconds without need to Reinstall it anymore

@redslashed 2 жыл бұрын

Thank you sooo much i tried soo long omg

@madladhobson 5 жыл бұрын

You made that sound so easy. Cheers

@TrickiKnow 5 жыл бұрын

Thanks for watching, check out my new videos too

@wolfmantrucker1541 2 жыл бұрын

Hey I'm new to this stuff and I love your videos I must say you kinda inspired me to get in to pi's but I'm trying to do a SD card reader for looking at my wildlife camera but couldn't find any videos on that

@trsdos80 4 жыл бұрын

I just did this on a pi with no keyboard , monitor or hdmi display. Dropped an empty file named ssh on the boot partition, fired it up, ssh'd in, ran the commands and boom was able to complete the raspian setup via the now working LCD. Thanks

@thydev6 4 жыл бұрын

thanks very simple and helpful

@oceanseabear 2 жыл бұрын

Brilliant. Worked straight away on my Pi4. Many thanks! Mike.

@blakegray9883 2 жыл бұрын

What are you using the display for? I am keen on getting one but I am not sure why it would be good

@oceanseabear 2 жыл бұрын

@@blakegray9883 Hi Blake, I'm currently using it as an addition to my Ham radio hotspot to show my DMR radio dashboard. Trying to keep my equipment as portable as possible. TBH the screen is smaller than my phone screen. Probably getting a 7"/8" screen that fits to Pi would be more useful for more applications. M.A.R.

@IronCross82 5 жыл бұрын

I just wanted to say thank you I do appreciate it

@garrapunchita 5 жыл бұрын

Thanks a lot man!! I was a little frustrated with the Chinese screen, but finally is fixed :)

@TrickiKnow 5 жыл бұрын

Welcome bro , thanks for watching 😀

@mbisson5816 5 жыл бұрын

Just what I needed, thanks. I bookmarked your blog.

@simplyinterpreting 5 жыл бұрын

Nice post and worked quickly. Impressed! Thank you.

@TrickiKnow 5 жыл бұрын

Thanks for watching

@RonSamson 4 жыл бұрын

Thank you. You made it so simple. Works like a charm.

@bellym1251 5 жыл бұрын

you sir are a legend, this worked perfectly on my raspberry pi3 model b+, thanks so much , liked and subbed

@TrickiKnow 5 жыл бұрын

Thank you so much for such a nice compliment , have a wonderful day 🙂

@jacobtran7892 5 жыл бұрын

How do I convert my raspberry pi back though? I want to be able to project it into the big screen again

@LouiesLog 3 жыл бұрын

I love your accent and voice

@firewall8985 4 жыл бұрын

Thank you so much!! I wish I found this video first, it saved me so much time. hitting the subscribe button now.

@rokaq5163 5 жыл бұрын

Thanks. Followed each step carefully, but ended up with an completely white screen and raspbian not fully booting up. Now I have to restart my final degree project from scratch. Very helpful.

@johnredorn 5 жыл бұрын

It worked I got my screen up and running thank you for the video.

@theglymp Жыл бұрын

thank you so much, this helped me out bigtime!!!

@raandomplayer8589 5 жыл бұрын

thank you very very much. Short, simple and easy to understand!

@Ri-Ci 4 жыл бұрын

Thank you! Simple and easy. I used a Kuman 3.5" touchscreen from Amazon with a RPI 3 B+, the only issue was although the lcd-show folder was clearly there, it wouldn't allow me to set permissions with chmod from the command line, I just skipped the part and was able to set the permissions later once I had the screen running.

@danieljohnlemi8218 7 ай бұрын

DONT DO IT IN BOOKWORM OS, IT WILL DESTROY YOUR RASPBERRY PI!!

@elektron2kim666 Жыл бұрын

Worked for me. Thanks. My first RPi (3B)

@harmanndhiman9492 3 жыл бұрын

Totally subbing and liking

@peterchen3301 3 жыл бұрын

nice tutorial, thanks.

@TrickiKnow 3 жыл бұрын

Glad it was helpful!

@protuningaustralia6795 5 жыл бұрын

Hi mate, another great video by you. Thanks for your help. I really appreciate the effort you go to to make these video to help people such as myself. Regards Dave.

@ohiodude38 4 жыл бұрын

Super easy to follow your instructions and get the screen display to work. Once the Pixel OS displays, the screen doesn't accept any input and even using keyboard/mouse, the cursor won't move. Is there a way to code the display to mirror on HDMI output so that both screens are on at the same time?

@MawaMaverick 4 жыл бұрын

dude you're a Hindu god. Thanks man. Subbed and belled.

@TrickiKnow 4 жыл бұрын

Thanks for the sub! , welcome to my channel :)

@adamshaban1 6 жыл бұрын

Awesome this helped me get the screen working with the Raspberry Pi 3 B+!!

@Harry-Powney 3 жыл бұрын

Thank you... it worked great for my PI 2

@Dang33305 6 жыл бұрын

It worked ! I cant believe it ! Thank you so much !!!

@TrickiKnow 6 жыл бұрын

Most Welcome bro , , i glad to see my video worked for you. Thanks for watching , Have good day 😀

@andrewcozier1888 3 жыл бұрын

Very clear details.....awesome! Thanks for the help!!!

@junebug3dprinting979 4 жыл бұрын

Got mine up and working with this video thank you sir!

@thomas.alexander. Жыл бұрын

Nice clear instructions. Thank you...

@harmanndhiman9492 3 жыл бұрын

Thanks mate

@benjaminaguayo7687 3 жыл бұрын

Thank you, very helpful

@TrickiKnow 3 жыл бұрын

Glad it was helpful!

@biganguria Жыл бұрын

me at 4am building an useless thing:

@soumitridas5968 6 жыл бұрын

ok thank you brother.you are the best KZfaqr.I always like you videos.

@TrickiKnow 6 жыл бұрын

Welcome bro , feeling proud because of subscribers like you 😀

@mojmirbalko4663 5 жыл бұрын

It works. Thank you man...

@TrickiKnow 5 жыл бұрын

You are welcome , Please watch and comment on my new video: kzfaq.info/get/bejne/j6ughqyoxpa8h4U.html

@anwarann9095 6 жыл бұрын

Super as always nice setup n installation of device

@TrickiKnow 6 жыл бұрын

Thanks for watching bro 😀

@v-king936 6 жыл бұрын

thanks a lot for the fastest ans easiest way to make it work !

@TrickiKnow 6 жыл бұрын

Welcome , thanks for Watching my video 😀

@aim2go975 5 жыл бұрын

My pi stucks at d bus system message, how can i get back, i dont want to set all new up, please help me , btw i cant write at this point

@mattcero1 2 жыл бұрын

Thanks man. The second command fails though. I get a -bash: git: command not found message. Please advise.

@jake_carss 5 ай бұрын

Thanks, It worked!

@avishekbehera 4 жыл бұрын

Does not work for me. Screen goes white. Even after running ./LCD-hdmi, still the resolution is screwed. Warnig: Please have backup and be ready to flash over again if it is screwed. I had the same 3.5 LCD screen that is given in link

@BigSwedeable 3 жыл бұрын

Wow, really spot-on, nice work and Good tutorial.. really appreciate it👌, aaand subscribed👍

@TrickiKnow 3 жыл бұрын

Awesome, thank you for subscribing ❤️

@luicyfer3283 4 жыл бұрын

hello ! Any advice for raspberry PI4 ?

@jithinthampi1 5 жыл бұрын

HI, Thanks for the Video. I tried the steps in the wesite to connect my raspberry pi-3 to 3.5 inch touch screen. But now I stuck where it is showing as below during the boot process [ OK ]Found device /dev/mmcblk0p6 Starting File System Check on /dev/mmcblk0p6... Its keep on checking like this. No move after this. Please help. Thanks in advance. Jithin

@thwol5193 4 жыл бұрын

Any solvibg ideas?

@ok.google 2 жыл бұрын

That's very useful, thank you!

@GDoggProductions 4 жыл бұрын

can you fit a fan inside the enclosure with the LCD screen attached :D ? great video btw ^___^

@rxgtv 4 жыл бұрын

Some can do that :D

@robertwright2668 3 жыл бұрын

Thank you worked for me :-)

@arpanshah355 11 ай бұрын

Great video!

@michaelkoch3367 5 жыл бұрын

Thanks for the Video. Display from my Pi works after the Instruktionen fromm you. Thanks and a nice Time. Greatings from Germany to you.

@andrewdupuis1151 Жыл бұрын

i just got mine kit today in the mail from ebay

@elpacificador93 5 жыл бұрын

great vid bro!!! question , my screen works well but the touch input doesn't work... :( any hits of the problems?

@cyberwolf5075 4 жыл бұрын

Are you using the pen given to you? It doesn't pick up much else, a year ago I tried the pen on my 3DS and it dident work, but it does on this, I tried my fingers, it dident work, so that might help, unless you allready figured it out yourself

@hidanone 3 жыл бұрын

Thank you chief, great tutorial

@MCAQUIN0 5 жыл бұрын

I'm happy it's in english

@derekflynn6431 5 жыл бұрын

Thank you sir

@Swaggmade 3 жыл бұрын

Thank you. This got my screen working in seconds, while I’ve been trying for days searching online with no luck. It really is super easy. However, is there a super easy way to uninstall it? Not revert it back to HDMI, or disable it, but completely remove the script, or completely undo what the script does? Thanks!

@SquallDNA 5 жыл бұрын

Hi thanks for the tutorial. However, im experiencing very low frame rate., Is that normal? Im using rp3b.

@TrickiKnow 5 жыл бұрын

may be your LCD needs different driver 🙂

@rxgtv 3 жыл бұрын

Try MHS35

@AK-fw6cr 6 жыл бұрын

This works great, thanks. One issue is my keyboard and mouse have stopped working - how do i get them to work as well?

@TrickiKnow 6 жыл бұрын

Install the fresh copy of raspbian to fix your mouse keyboard problem 😀

@Lavagemstomacal 6 жыл бұрын

Thank you so much!

@sunjijungsunji5161 5 жыл бұрын

Thanks for useful video, but I am wondering if Raspberry Pi can display on both 3.5 inch LCD screen and desktop monitor at the same time. Thank you in advance