How To Build Headers | Trick-Tools.com

Рет қаралды 597,235

Күн бұрын

How to build headers? That is a great question. Maybe you want to make your own, but you don't know where to start? In this video, we highlight the header building process and the tools that we offer that can reduce build time. You'll also see tips, tricks, and how-to information that can help guide you through your header build.
Here is a list of the tools and matching links to the products you'll see in this video. available on our website www.trick-tools.com
Icengineworks Modeling Kits.
www.trick-tools.com/Icenginew...
Icengineworks Tube Cutting Jigs.
www.trick-tools.com/Icenginew...
Our Entire Icenginworks Store.
www.trick-tools.com/Icenginew...
Angle Finders at Trick-Tools.com
www.trick-tools.com/Angle_Fin...
Vertical Band Saws at Trick-Tools.com
www.trick-tools.com/Vertical_...
Kalamazoo Belt Sander
www.trick-tools.com/Kalamazoo...
Belt Sanders Store
www.trick-tools.com/Belt_Grin...
SPD Exhaust
www.spdexhaust.com

Пікірлер: 161

@edgarpryor3233 5 жыл бұрын

A tip that I figured out when using the mock up kit is to make a line from one end to the other with a dry erase marker. This allows you to find the proper orientation if anything moves while taking it out to transfer to tubing. The kit is amazing, my first set of headers were 2" fender exit on a '64 GTO, I think they turned out great.

@markrich3271 6 жыл бұрын

I have one of your tubing benders and love it . I called up the company and your service was great.

@charlesparr1611 3 жыл бұрын

On the on hand, this is basically a commercial for header modeling blocks. On the other hand, these are one of the coolest tools I have ever seen. I am completely new to header and exhaust fabrication, for all I know these are commonplace in the industry, but still.

@xcelerator67 4 жыл бұрын

Wow that definitely makes things easier! After watching this I'm confident enough to give it a try! Thanks😁

@earlcousins6635 6 жыл бұрын

Nice Job! Great Info! Hope you guys do more of these.

@ever4437 5 жыл бұрын

The plastic blocks are the best , easy to use and headers come out perfect. Best money I have spent on a tool.

@johnmathews3027 4 жыл бұрын

Hiya thanks for taking the time to show as the video. Learnt a lot👍

@henryrollins9177 5 жыл бұрын

Theres no need to purge the pipe for the tig welding? Not to create "sugar" on the interior side of each weld.... Anyway, great machinery and methods !

@philipzerna9654 4 жыл бұрын

Geese those modeling blocks are the bomb , I just had to make them by hand which very time consuming !

@DCweldingAndArt 4 жыл бұрын

Ya. Dude did great! We have the same helmet (miller us flag) , gloves, tools, etc. I said, "I like this guy" great welding also and instructional content

@brianslicanderson3240 4 жыл бұрын

Awesome work!

@aaronroland336 2 жыл бұрын

good tips nice info..keep making more video mate

@toast_fairy1419 3 жыл бұрын

damn those modeling blocks are genius

@jackle842000 4 жыл бұрын

Well something else marked off my life's list of things I'll ever attempt to do myself lol

@troywatson4686 4 жыл бұрын

Great how to video!

@telstraoranamall7680 4 жыл бұрын

Good stuff

@byronrichards3001 2 ай бұрын

Awesome upload my Guy, your knowledge and experience/skill level displayment is very much appreciated. This upload will help me tremendously to start out on this new hobby/profession. Keep informing the people...

@cameronyoung2004 6 жыл бұрын

Fablife ftw. I definitely learned something. Keep it up!

@xcaione 4 жыл бұрын

Ребята вы просто супер! Привет вам из России!!! И респект огромный.

@tomthompson7400 3 жыл бұрын

few great tips in the video , many thanks.

@TrickTools 3 жыл бұрын

Glad it was helpful!

@chrishing8491 5 жыл бұрын

Wow those modeling blocks are such a great idea , thanks for sharing , awesome video

@jdmtake1 5 жыл бұрын

FINALLY SOMEONE MADE SOMETHING LIKE THIS MANNN.

@fredwilliam1574 6 жыл бұрын

I do want to make some headers with my powertig. Great video.

@LarryPeteet 4 жыл бұрын

Very Well Done in regards to Information and Presentation! When you started welding pieces of previously cut tubes I wasn't sure how you arranged each piece to have right angles just before welding.

@TrickTools 4 жыл бұрын

All of the pieces were tacked together in the car in place. If you do need to remove them to tack I recommend marking the clocking of the tubes with a sharpie across the weld seam.

@Moparmaga-1 4 жыл бұрын

Great video

@theroyalcrownedtiger2946 4 жыл бұрын

Thank You

@billclark5943 5 жыл бұрын

I have built over 40 sets of custom headers in the 20 + years I was doing that type of work. If I ever built another set I would use those modeling blocks simply for the reason of having reality more closely match fantasy in the final product

@mrmidnight32 5 жыл бұрын

Bill Clark until you realize a case of them is $1,399 🤦‍♂️ $1,500 for a box of big legos. This is why America our sources everything. American inventors always want a fortune for simple products.

@prddesign 5 жыл бұрын

@@mrmidnight32 Products like this aren't intended for one time users. They are for people building headers regularly that are looking to increase productivity and profit on their work. They pay for themselves over time with the time they can save on multiple header builds. Companies like Amazon and Walmart have spoiled everyone into thinking that everything can be had for $9.99 and free shipping. Icengineworks is a small company producing and product to assist people. They can't mass produce these on a scale large enough to make them $100. We all like to get paid well enough to at least make a living and I'm sure you're no different. American Inventors get hosed because everyone has become too cheap and misinformed to what it really takes to make a quality product and also make a living doing it without having to outsource to a foreign manufacturer.

@Avetho 4 жыл бұрын

@@prddesign Its refreshing to hear more intelligent points of view sometimes. Thank you.

@danojames8329 4 жыл бұрын

Awesome

@christopherwebb6133 4 жыл бұрын

VERY VERY GOOD VIDEO.... GREAT JOG GUY'S

@ifell3 5 жыл бұрын

Haven't used this word in years, but that's sick!!!!

@RotorMedic7 5 жыл бұрын

VERY impressive products!!!

@SSGTA440 4 жыл бұрын

I built my own headers for my project, a Gen 3 Hemi in a 92 Chrysler Lebaron SS/GT. it wasn't a real easy job, they turned out pretty good. Now, those modelling tubes would have been awesome....I used aluminum fuel line as bend surrogates, also, my headers were step tube, started out as 2 1/8, to 2 1/4 ending with 2 3/8. They don't look as pretty, but they are real close to equal length. Step tube headers make a lot more power due to the "release" velocity thru the tube, but are more troublesome to make.

@diamanteday8580 7 ай бұрын

How did your exhaust sound afterwards on the LeBaron?

@maximuswedgie5149 4 жыл бұрын

This is free extremely valuable information. Great video and thanks for sharing this.

@Freebird67 6 жыл бұрын

Excellant video thanks for posting

@manueltovar4821 4 жыл бұрын

freaking genius who ever came out with that header kit that's got to be the coolest thing i have seen the only thing that sucks is the price there very expensive but i guess they will pay for them selves specially if you build lots of headers but a great tool to improve and make your fab skills better.

@TrickTools 4 жыл бұрын

You have the right idea. They are made for those that will be making many sets of headers and can utilize the blocks many times over. They will pay for themselves over time

@akeemscale2522 5 жыл бұрын

hello. what is that yellow thing that you used help with the setup?

@RyanKirk99 5 жыл бұрын

Nice video, very informative. Thanks!

@gdfitzgibbon Жыл бұрын

I used a 1 3/4” kit to help design/build a roll cage.

@ronsmith7739 2 жыл бұрын

And one to learn a Tig welder very, very good !!!!!!!!!

@azza9423 5 жыл бұрын

damn, those modelling blocks look UNREAL!!!! See for me I lack the imagination to see a product until it's actually finished, whereas most people can visualise their jobs, no matter how hard I try I cannot, if only I had the money for a set! That would be something that helps and saves sooo much damn time.

@johnthiessen4749 6 жыл бұрын

Looks nice, not sure if it’d save me any money but I’d just like to build a set myself. Don’t have TIG though, should be okay to use MIG instead, no?

@jodymontez693 4 жыл бұрын

OMG, Medusa!😃

@welderjin 4 жыл бұрын

멋집니다.😁

@stormcorrosion176 6 жыл бұрын

Great video sir!

@jamesguralski5156 5 жыл бұрын

Sweet work

@clancyrich88 5 жыл бұрын

that's one trick tool right there

@SaW216216 3 жыл бұрын

An incredible and instructive video you made. I will definitely adopt your method in my future!. Can you answer what music was in the video?

@TrickTools 3 жыл бұрын

Thanks for watching. the music was just royalty free music from Epidemicsound.com

@winstonchurchill2325 5 жыл бұрын

What a great vid very informative. 👍

@oberleitner1 6 жыл бұрын

uau demais amigo!!!!

@allenmaccarthy7108 5 жыл бұрын

Great vid thanks

@Dpiazza555 6 жыл бұрын

Thanks for a clear demonstration. Can you recommend an entry level TIG machine? I would like to fab my own headers out of stainless. More hobbyists than pro, but would like to avoid the head aches of a lesser machine.

@eraragons 5 жыл бұрын

How did you weld all the way around on the pipes going into collector? Seems a bit of a tight squeeze

@wallamazoo01 4 жыл бұрын

Big gas cap and extended stickout?

@Mopar_Taxi_Guy 4 жыл бұрын

To build a full long tube header like in this video. Do you need the Pro kit or does the basic kit have enough pieces to get the job done?

@TrickTools 4 жыл бұрын

the Pro kit would be the best option. the Basic kit wont have enough blocks to model the complete header.

@curtokay8046 2 ай бұрын

So would that work on tight spaces like a Bmw e46

@lordznehlrak9781 6 жыл бұрын

Can you use this to make custom intercooler piping?

@el_kuks 4 жыл бұрын

For sure!

@chrisg4rr377 4 жыл бұрын

Those style American cars look soo easy to work on. Stacks of engine bay space

@TrickTools 4 жыл бұрын

This is not a street car. It is for racing purposes. Typical street driven cars have far less room.

@dclsxfactory7823 4 жыл бұрын

Do you fusion weld the butt joints? Its hard to tell if you were tacking or fully welding in the video since it was sped up but i didnt see any filler rod lol

@TrickTools 4 жыл бұрын

The seams were fusion-welded as much as possible only adding rod if needed. I put a premium on no gap seams so I can do that. It allows for a lower weld temperature keeping to base material from getting too hot and therefore becoming more brittle while also limiting "sugaring" on the inside. I've used this technique for years and welded somewhere between 30-40 sets of headers with no cracking or other issues.

@dclsxfactory7823 4 жыл бұрын

Trick-Tools.com awesome, thanks for the reply, im about to tackle a set of zoomies and been hunting different ways guys build stuff, id rather spend more time dealing with perfect fit up then adding filler rod on every joint. Everything you said makes sense so thats the method im using. Thanks again!

@LOWPR0FiL3 5 жыл бұрын

do you guys ship worldwide ?

@cybaneticcybanetic441 4 жыл бұрын

In your design, do you take exhaust scavenging into consideration???

@TrickTools 4 жыл бұрын

The design of the headers was based off of the specs of the engine and the amount of airflow needed to allow the exhaust gases to properly exit the cylinder heads

@Ldavidable 5 жыл бұрын

Thanks

@darkshadowsx5949 5 жыл бұрын

great video I'm going to have to replicate OEM exhaust headers for a 42 year old bike. There are no good online options. :( for me buying that plastic kit is counter productive as i have the originals to copy on hand. but the cutting jig and tips are handy.

@toast_fairy1419 3 жыл бұрын

omg you did this on a syncrowave 210 i just bought one

@TrickTools 3 жыл бұрын

I love mine, had it for 4 years and its been bulletproof

@harperjmichael 5 жыл бұрын

Is there any need to try to keep each primary tube equal length?

@Assorted-Moose-Nonsense 5 жыл бұрын

Is it also right that as all primaries are the same length and material that they will expand with heat at the same rate and that reduces stress or the risk of cracking? Or is that not really an issue if they were not the same length?

@TigWorks 3 жыл бұрын

What series would i need to buy if i want to build headers for a 17 camaro ss?

@TrickTools 3 жыл бұрын

likely the 1 3/4 or 1 7/8 kit. we can't recommend an exact fit unfortunately. I would consult with SPDexhaust.com to determine what may be necessary for your application

@boostnhoe 6 жыл бұрын

Just curious as to why the stainless headers weren't back purged?

@ray5961 6 жыл бұрын

TrickTools You are not using any filler rod correct? Just using a series of tack welds basically one after the other?

@joshuablacker940 6 жыл бұрын

Back purging is more necessary for forced induction engines and not always necessary for a stainless weld to be strong. Stainless filler should be kept on a needed basis, stainless is better atoginisely welded to keep as pure base material as possible. Most filler is good on purity but not as strong as base, in the milk processing industry/food industry they will sheer off their own filler rods from the base material their welding and everything is accounted for and strictly monitored. Same with aerospace in some circumstances.

@camscustombuilds 5 жыл бұрын

When welding the primary tube butt joints, do you leave the tubes flat with no bevel? Do you feel the longevity of the manifold is as good when you use filler vs no filler? Any pulse used during your welds?

@groomlake51 5 жыл бұрын

TrickTools looking good😎 trick indeed

@vinniemartin3682 5 жыл бұрын

In the Aerospace industry we always back purged because of the class 1 x-ray quality standards. If you did it on a set of headers, it would be way better but you would add more cost because of your Argon use . Great video and awesome talent and tools .

@PassatPalma 6 жыл бұрын

Muito bom amigo. Voce vende esses kits? Ou é só loja? Um abraco aqui do brasil.

@carlomarphis8622 6 жыл бұрын

When are they going to make a modeling kit larger than 2" od. Big ci drag race engines need 2 1/8" all the way up to 2 1/2".

@cjboncosky4706 5 жыл бұрын

What’s the best type of welding for custom exhaust work?

@luca9130 3 жыл бұрын

Looked like you didn’t use filler wire on any of those butt welds. Would it be less likely to crack if filler was used and the pipes have a very small bevel? Or not really necessary?

@TrickTools 3 жыл бұрын

With perfect fit up at the weld joints, filler rod is only used when needed. With proper heat and technique penetration through the seam can be achieved without compromising the tube strength. This process is plenty strong and has been proven many times. These specific headers have seen 2 racing seasons and are still in great shape.

@teamfishbowl1076 4 жыл бұрын

Dude holy crap i want those modeling blocks, any dealers in Australia ?

@TrickTools 4 жыл бұрын

We do not, however that is a UPS shippable item so it would be easy for us to ship to you. let us know!

@peterm3159 5 жыл бұрын

What band saw is that your using?

@TrickTools 5 жыл бұрын

This was a Dake machine. We have a good selection of vertical band saws on our website www.trick-tools.com

@samstewart4807 3 ай бұрын

hmm why were you not using back gas with stainless steel tubing? and how much did you charge for that job- details

@peterbuilttough3406 4 жыл бұрын

I got a few stick of 20' stainless round. Problem is Stainless won't bend like DOM it kinks and it's takes alot of force. Kinda frustrated

@TrickTools 4 жыл бұрын

That is why we recommend buying pre-bent materials for small jobs. The type of bender required is a large investment and typically made buy companies working to mass produce parts

@peterbuilttough3406 4 жыл бұрын

@@TrickTools Heard That! After spending two long days modifying the Dies and rienforcing the design from Eastwood I got it to work really nice only added about 100 lbs of material. I Definitely did it the hard way! but I can now bend 2"x 1/8 wall stainless tube. wahooo

@SXXYXXV 4 жыл бұрын

What is the name of the yellow constructor and where can I buy it?

@TrickTools 4 жыл бұрын

Products and links to our website are listed in the video description. Thanks

@qikfox302 5 жыл бұрын

Nice kit, but it'd be nice if SPD exhaust would list prices on their website. I suppose I'll continue to use Stainlessheaders.com

@TrickTools 5 жыл бұрын

a simple phone call and they can answer all of your questions, quickly. Nothing beats personal service.

@MindDezign 5 жыл бұрын

You guys know how to extract most of my imaginary money ! There isnt a bad idea in your product line. These are truely tools made by guys that ACTUAL DO THE WORK.

@V8full 5 жыл бұрын

Cool

@garethweare6441 6 жыл бұрын

this kit works for turbo manifolds as well i assume?

@garethweare6441 6 жыл бұрын

i have fabrication and machining experience, but none with building manifolds, i do understand flow dynamics and so on... was just looking at this to make the process even easier in regards to routing of the piping.

@nickbradburn7485 6 жыл бұрын

Best video I have seen yet about building a set of headers, and some great recommendations on tools. Do you believe a TIG is absolutely necessary, will a MIG do the job?

@nickbradburn7485 6 жыл бұрын

Awesome, thanks!

@jimsomers7182 4 жыл бұрын

Very good video. Excellent work. I've done several two into ones including compound tapered bends and collectors. I use a wire for measuring the same way you use your tape rule. Never seen the modeling blocks before, they are now on the list. My only criticism is that no experienced fabricator uses gloves of any type in any shop that has machinery with moving components. Doing so is the very wrong example for novices. I hope you are not forced to allow insurance companies to dictate how work / play is to be conducted in that nice facility.

@TrickTools 4 жыл бұрын

Thanks for the reply. I will say that I am a very experienced fabricator with 15 years and over ten thousand hours under my belt. I use gloves regularly to protect my skin from molten metal sparks and sharp edges and I have never fallen victim to a machine because I make sure that I keep my hands away from pinch points and away from the parts that will catch you. I always hold my parts and position myself to in a way that If I slip I wont push my hand into the machine. Most accidents happen because people are careless with hand placement and set themselves up for failure. Thanks for looking out and I will say that we get hate mail when we do and don't wear PPE. Everyone has a different way.

@Themetalsurgeon 5 жыл бұрын

Oh wow

@kingks3302 4 жыл бұрын

Kansas POWER!!!

@califuturist 3 ай бұрын

9:24 Wouldn’t it be easier to use a chop saw with a jig, instead of a jig saw?

@almierz4604 4 жыл бұрын

How do you determin which primary tube goes on the collector position. Should the tubes be in a clockwise firing order on the collector or doesn't it matter.

@TrickTools 4 жыл бұрын

Hi, Thanks for watching. It depends on your application. On most applications you wont notice any difference in the location of the primary tubes in the collectors. For space reasons sometimes you would be limited to which tubes have to go in each location as well. Hope this helps

@vaioskaliakoudas6388 6 жыл бұрын

Does this tutorial also cover custom turbo manifold fabrications???

@stonebone1179 5 жыл бұрын

Vaios Kaliakoudas if you can make the shape with the tools shown and weld it, yes

@patrikinkret6870 5 жыл бұрын

What's the angle tool called?, where do i buy it

@welcome2myworld1.o89 6 жыл бұрын

So can you make a video on how to start from scratch to finish for all sizes of engines. Like say you have a stock v6. Then you SuperCharged it. As well as cold air intake and bigger intake manifold. How would you test and figure out the best size of exhaust for best hp torque and gas mileage? And how to keep back pressure and or get ride of some. Maybe a video on how to cut the cats off. And use the stock headers and add on the tubs? Idk. Perhaps a schooling video on how to choose the perfect exhaust system based on size of motor and how manny cylinders it has. I don’t know how to explain my question. Every car has a different inch of exhaust and length of exhaust and what not. But how do you figure out that size and length? That’s what I’m confused about and what I’m trying to train myself and teach myself how to learn that.

@willemverploeg200 5 жыл бұрын

Same here! If you find out, let me know! I'm also curious about it...

@TrickTools 5 жыл бұрын

the best way to know what materials you need for your headers is to build your engine how you want it, to know all of the detailed specs about it. Then get a hold of SPDExhaust.com and they will use your specs provided to assist you in material selection.

@flyingcatsofthesalishsea. 5 жыл бұрын

Rad

@garylal2465 5 жыл бұрын

first time viewing your channel, would like to know if you build headers for motorcycles and if you do not, could you furnish an effective sourse

@TrickTools 5 жыл бұрын

unfortunately we only build projects for the purpose of making videos. we don't do regular customer jobs in house. there are many talented header builders around to country though.

@earlcousins6635 5 жыл бұрын

What Tube Bender(S) did you use? Thanks.

@TrickTools 5 жыл бұрын

we bought these bends from SPD Exhaust. While we sell the necessary benders they are extremely expensive and made for production use

@arielazores7352 6 жыл бұрын

Its all stainless pipe

@sim-sim6956 6 жыл бұрын

Лайк 👍

@ele4853 4 жыл бұрын

For the selling price of the "icengineworks" kit I buy a very nice pipe bender and still have money left...

@TrickTools 4 жыл бұрын

the type of bender it takes to bend this type of tubing is mandrel bender. standard tubing benders wont bend thin wall Header or Exhaust materials. the mandrel benders that we sell start around $59,000. you cant bend this material on a regular tube and pipe bender.

@redbaron2448 5 жыл бұрын

If aftermarket mufflers Magnaflow or borla give you horsepower, why are there headers going out on the fenders and not all the way back?

@bryanray6068 5 жыл бұрын

They don't give you horsepower the most horsepower you can get is right after the header. A trick is to weld a pipe on the collector and paint it were the paint burns off after running it is were to cut it for most power.

@4DIYers 5 жыл бұрын

#weldingporn

@Steinersgarage 5 жыл бұрын

I could almost say the modeling kit Is the best tool in the world for building headers but.. the price is waaaaay to expensive for some plastic.. so much it's more worth to build the same thing DIY.. :(

@TrickTools 5 жыл бұрын

These modeling systems are intended for builders that make many many sets of headers. we agree they aren't worth the price for one time use.

@talononestealth9050 5 жыл бұрын

How to find a buy hidraulic bending machine for exhaust pipes titanium thickness to 3mm wall, stainless 430,304,316,and I need robust tubenotcher and cylindrer drills, english wheel, igbt inverter AC/DC pulse hf tig 3-350amps, I need a lot of tools, fak......

@welcome2myworld1.o89 6 жыл бұрын

Can I pay you to build me some?

@troybrake5686 2 ай бұрын

For plastic its awful damn expensive! 4 to 600 dollars is just nuts 🥜😢

@tomleyden5631 4 жыл бұрын

Maybe I'm wrong but it looks like you have female end of the pipe coming off the head first. Wouldnt you want that the other way around

@TrickTools 4 жыл бұрын

not sure what you are referring to?

@tomleyden5631 4 жыл бұрын

@@TrickTools I noticed in a couple of frames the one side of the pipe was a small end (male) fitting into the larger end (female). Wouldn't you want the male end always going away from the head into the female end

@TrickTools 4 жыл бұрын

there are no slip joints in these headers other than the tubes into the collectors. what you are seeing is the step up from 2 1/4" to 2 3/8" in each tube which we achieved by expanding the 2 1/4" tube to 2 3/8" and then butt welding them together.

@tomleyden5631 4 жыл бұрын

@@TrickTools no kidding. That's amazing