Man I can really appreciate how nice and laid back you are even when people are being nasty you remain you ' keep it up my friend it's refreshing.

I wanted a review of these blades to see if they were quieter or stable. You answered that question that I should avoid them as they were not quieter and not as stable. So good work mate. Thanks for the video

You rock! Keep up the chill totally unscripted normal person reviews and videos. The best part about you is that when people say negative things about you, you are not negative back. You are just you. Keep it up!

You might want to re-edit your video and take out your comment at the end where you say "at least we've got insurance" - I'll bet you void the warranty flying with non-DJI parts. Like most people, I scanned through your video. How about a summary in 5 minutes?

The lagging if from your phone overheating. Turn down brightness or keep your phone in the shade. Since the new iPhone oleds absorb more sunlight they heat up quicker as well.

Surfs up dude

there is no better props for dji drones than original

At last a review from America where the reviewer isn't shouting and saying 'awesome' in every other word ... love your style its just watchable while being engaging thanks

What's with all these comments telling you to shorten your videos and summarize everything? Where do these people have to be next that's so important? Why can't they spare the time to watch your entire video, because it's certainly worth their time. Or have our smartphones made us all so attention-dumb, that we can't focus on anything for very long anymore? Sad.

Sorry late to the party. I use to freestyle with the other quads. When the hype came we learned fast that most of them need to be balanced. Carbon fiber makes the motors work harder. That flexibility goes a long way. I never like those carbon fibers. Had them for many drones including the typhoon h plus. They sucked. Never went back. Talked my buddy out of buying some for his drone.

Goog on you nick for making the vid, good review. Big hi from Australia!

Mate be careful. I got hurt with those blades.. all the best and keep posting. 👍👍👍

Im with the 3 bladed propellers if not properly balanced and it goes for the 2 blade also will vibrate. But i use the 2 bladed carbon fiber propellers from "Master air screw" for my DJI Pro, Yunnec Q500, and DJI pro2. Excellent performance.

Dude! Get some safety glasses - squinting isn't going to save your eyes if the blades fracture or even flick a particle at you. They are very inexpensive and you can get clear or tinted for sun.

The companies marketing definitely got ya here. Generally, the more blades the less efficient they are.

You've got that Corona Nick 🦠⚰🤢

Go with your gut on such things. We pick up nuances around us that we can't quantify. Stay with DJI.

Thanks for sharing this! #KeepItUp

Glad I watched this before picking some up.

Hi Nick, I really liked this video. Great production values and presentation! I have a Mini 2 and was curious if 3-bladed props were more effective than the standard 2-blade set. I think that they would give the drone improved lift, and possibly improve agility a little, but at the cost of increased drag. It doesn't make sense that they could increase flight-time as they must cost the aircraft more energy. I also noticed that you like to travel and record your adventures. Have you visited Australia yet? You'd be adopted as an Aussie pretty much the moment you cleared customs 🙂 You would be welcomed wherever you travelled, and every State has it's own wonders to share. Spectacular coastlines, state forests, mountains, the Red Centre, rainforests, the list is endless.

Entirely scientific analysis

hey man i really like your style in the videos you post. keep it up bro, keep doing you. Also, I'm new to drones was thinking of getting a DJI spark.. do you think its still worth it after being out for a couple years? thanks

Carbon Fiber is overhyped. Stress cracks result in total failure. Flexible blades are forgiving and last longer. Beware of the carbon fiber hubs.

I am, for the most part, not a drone guy. But I am an avid RC pilot of planes and helis that make it fairly obvious what the issues with these three bladed props are. Just by looking at the design itself I can almost guarantee these units suffer from poor build tolerances. I suspect for most of you that has been in the hobby a little while that it doesn't take long to realize the importance of mechanical tolerances and how it is fairly crucial for things that spin quickly, such as propellers. ESPECIALLY prop sets that have more than two blades. Propellers in general have very little room for mechanical or any other form of structural inaccuracies of any kind in this regard and will exponentially suffer drastic efficiency losses and eventually incur a plethora of havoc on most if not all of anything is has any form of connection with, all the way down to effecting the life battery that drives it! centrifugal balance and precise shape mirroring from one side to the other if any to the next to achieve anything What the common Chinese industry is good at is their expert ability at replicating and mass producing believable looking copies for pennies on the dollar. They are also great at regurgitating various "so-called facts" and sales points within their products advertisement descriptions and technical specs, albeit usually with very poor grammar within their wording choices and lingo jargon that's been what they've heard about a products performance based on its known methodogy. What most Chinese manufacturers aren't any good at is understanding what they've replicated, and or what is acceptable for

Just a video I was looking for thanks buddy

Yeah, I think if I go with aftermarket props for my Mavic 2 Zoom, I'll stick with Master Airscrew. I've used their props on my RC planes, and never had any issues with them.

Good review, Nick. Pretty sure I'm not gonna burn a trail to get these props. Theoretically, they SHOULD perform better than the DJI stock props. But, flight time is still going to be guided by how much drain there is on the battery and these props obviously really tax the motors way more than the stock props. Also, your device: after trying iphones, androids, ipads, android tab, whatever, it always comes down to the heat of the day. I live in Houston (Hot. Hell takes it's queue from Houston) I don't DARE fly after 11:30am or at least 1/2 hour b4 sundown. I can count on whatever device I'm flying with to do what yours does or worse, like shut down. Very thrilling when the drone is 2k feet away!

Thanks for sharing your experience with new propellers for Mavic 2 Pro :)

Thank you for providing us with your experiences. I initially could not see any reason why the three bladers should get us the advertised advantages. You have again proven that physics are always correct. Especially in regard of poor manufacturing and balancing. I also had thought of expecting a higher torque on the motors for the higher drag produced by the triplets. Since the energy demand is following the lifted weight into a certain elevation and the efficiency of different motors is not linear to a specific rpm necessary for different number of blades. I had expected to have even much less flight time compared to those original twins. Thanks again for your findings 👌

Since Carbon Fiber hinders signal transmission, I tend to skip over ANY Props that are made from that material. That said, I regularly use Triple-Bladed Props on my Mini 2, Air 2, and, now my Pro 2, as well. Stick to the Glass-Nylon designs, avoid Carbon Fiber ones, and Youll be a lot happier. i picked up a set of Glass-Nylon Triple-Blades for around $16, from Amazon, and they work quite well, since I live at high elevation.

The (air screw stealth 2 blades) are better than the stock blades, quieter and give you a little bit more battery. Master air screw makes great products you should try them.. they made my original mavic pro quieter, and have more battery life by about 3 or 4 minutes.

Good review I just sold my mavic pro I’m looking at a newer drone should I go with the zoom or pro I won’t be doing a lot of photography if that matters which one you think I should get?

The Lag is due to the heat and your phone. What phone are you using? I've had this problem in heat with my iPad mini 4. I use the Crystal Sky now and NO LAG.

Nick, I will tell you what I think, but I dont have too. Because it's the same as what you think... trust the gut Nick, trust the gut......

Cool video thanks for sharing !

I think you are the coolest review i've ever seen..

Subscribed because dabs

I have been using tri blade on my mavic mini for a few months. And I can say for the drone I have they are about 30% quieter. They have a much better wind resistance. No speed or flight time difference at all.

Very interesting video.

Cool test! Think you should point the antennas up on the controller though. keep it up!

Three blades props on any drone will result in shorter flight times. On a the awesome Bugs 3 your lucky to get 9 minutes against about 12-15 with standard props.

thanks for this!

Dont worry if its miles away and there's no link will rth if your not convinced test it on low battery make sure your settings on low battery is set to 25 to 30% reserve power have fun oh you can test it on shoreline Park all you need is a few hundred yards have tried myself

I just got the zoom and I definitely don't want to do something that doesn't enhance it's performance in any way. Good test vid.

Thanks Nick... I appreciate the time you invest looking for improvement's for the MP2. I think the moral to this test is simple, "if it ain't broke, don't fix it!" In fact, I think that rule especially applies the the MP2 because of how good it is out of the box...That said, from what I'm seeing and hearing Master Airscrew just may have it going on for us! Btw, you got my sub bro!

Dope video bro. Better to watch this with 2x speeds.

Well the theory is correct and match the results. Of coarse the blades make a difference.

Number 15: Burger King Foot Lettuce................same voice

Great video and very nice review Corona. You did an amazing job as usual with your videos. We are always more comfortable with the stock blades compared to any aftermarket blades. Great review. Nicely done and good job. Please keep those good videos coming. Thanks for sharing this great video with us. Thanks for all you do and keep flying. 🚁✌️💯👍👨‍✈️🙏

“I’d be completely screwed if I couldn’t see it right now...” - pretty sure that doesn’t happen with VLOS flight. Even if it does, the RC provides enough telemetry information to fly the drone back to you.

I would say oem is best they have winglets on the tips for ridgity

PROPS to them for making the big claims 🤣

Love your VideoS! It's an error when your very HI lol; Thank you for teaching me Brother! Johnny O

schöne grüße aus Deutschland ... nettes video ! 👍

Quite is very good.

I would say your phone is over heating and the processor slows down to prevent further over heating

Totally awesome dude

If you lose the phone you are not completely screwed. You can use the distance and altitude on the controller to get it back. Switch to tripod mode and go full stick forward until the distance is coming down the fastest then switch back to position until you can see it

14 mins of talking...then you see the comparison......can be shorter bro....I do watch you vids though!!!

Skip to 15:29, he is baked and goes on waaaay to much about the props. I have the same props and they are louder and dont give anymore flight time on my mavic 2. They do give more thrust, but with three props your esc and motors will heat up more, that could be the reason for the video feed breaking up. Ive flown in 30c and higher with them and at - 22c. They dont give any improvement other than thrust i find. Party on Dude.

Hey man note ipad will fail in hot weather will blackout stick to oem in case of warrantee issues 3 blade will make motors work hatder carbon fiber props can be lethal shards if broken

love your channel , you are best not scare trying same thing new on your drone, the what life is about trying

I don't think any wobble could hurt your video footage, but it will be bad for you motors, wobbling the motor shafts

All aftermarket blades seem to vibrate way more. I tryed 3 different sets from Airscrew all of which heated the motors way more and vibrate bad. Also be cautious of the knockoff DJI blades they look the same but are terribly balanced totally different quality and only about 10 bucks cheaper definitely not worth it.

great drone video i subbed you

I believe hot weather could be a problem. The DJI website said the working temperature rang should between 0 ℃ to 40 ℃,

Out of ten, how stoned were you during this cast and how many bongs do you have per day.

I'll stay with the original ones... Those ones you showed were loud and none reliable...They could break in mid air and you'll be screwed!

I love how quite my mini 3 pro is. 200+ miles so far. Mini 2 hasn't flown since but 1000 miles flown with it😆✅.

it happened to my mavic 1 long time ago, i took off with the Triblades and i don't know what in the name of hell happened... it just risen above my chest level and suddenly it flew sideways REALLY Fast while dropping to the grass, nothing serious happened since the soil was soft and acted as a bumper, when i inspected it... one of the TriBlades hit the body of my mavic, don't try them man!

You’re awesome dude 🤙

Replace the short cable from controller to phone. Use the USB port on the bottom of controller to phone. Eliminates a lot of glitching.

Just wait for the Masterairscrews coming out next month, it has great wonders on my Mavic Air and it's much quieter and longer flight time. Still going to wait for the reviews once it comes out

Good Show

I wish I was 20 and all I did was smoke pot still. Keep living it bro keep living it..

Not gravity, you meant "cengrifugal force"

Why can't I see your OTG cable on your remote controller?

THIS GUY HAIR IS DEFINITELY THE RIGHT COLOR!!!!😂😂😂😂😂

Thanks for review! Please consider wearing some safety glasses.

I seen the arm that's closer to you was vibrating like hell, not the one that had the stiff blades on it.

Dude, if DJI could add 40% flight time with a 10 cent piece of plastic, you don't think they would have done that already?

At 5:47 when he’s talking about “…the Gravity…” I think he meant “the rotational inertia.”

The heat causes your phone to lag ^^^^^

Vibration is killing for the electro motors. Do not use these.

Holy shit, you are NorCal

i am not sure but there is some reason if DJI build it, probably for windy Env or kind like that or some hard environment. Very nice video Bro.

There’s a lot of videos already covering why this is a bad idea.

damn 12:33 scared me :)

My Mavic pro has had the double blade carbon fiber. They definitely help with wind conditions. Plastic befits you only so much lol. I see comments saying they made them flexible for a reason and that’s true. Also do you see plastic props on an airplane?

Video starts at 15:00

I love my evo!!!

Brought to you by MarY Juana.

You should spread the blades apart before starting the motors 😉

Last name is corona...........

The 3 blades sounds like a Mavic Air buzz LoL

I wonder if the transmission error with the controls is because of interference from the carbon fiber props.

I didn’t read anything on the listing they have up about 40% more fly time. 🤔

IPhone works well the dji drones compared to Android for my experience, and also if you record video to the drone storage vs phone storage the reception won't interrupt

Video starts @ 14:20

Try changing the Dji connector cord. Looks like you are using an iPhone. Try using a lightning data cord connect to the USB slot at the bottom of the remote to the phone or iPad. No more Lag