STUFF: 1.25″ Hole saw (get at least two, maybe three) amzn.to/48b1b6B Drill bit extension set amzn.to/480Ethv 5/8″ Dowel amzn.to/3GSK79F A good drill amzn.to/41zUKHI Table lift (optional) discount-ramps.sjv.io/motorcyclelift Other common shop stuff supplies WD-40 Saw Drill bits Rubber mallet or hammer Magnet Pliers, etc.
@bugscooters7 ай бұрын
Been doing a lot of thinking and looking and I'm coming to terms with needing a T100 in my life. There's one for sale around the corner from me that is very, very tempting. Looking forward to seeing how this competition turns out.
@YouMotorcycle7 ай бұрын
Hahaha. I usually just keep a little bit of money put to the side so that when a nice bike comes up at a very tempting price I can go for it. Ride it for a while, make it better, and move on. We'll see which of the trio I keep! 😬
@scottathompson759513 күн бұрын
Norman Hyde Togas (UK) are often considered the best sounding exhaust for the Bonnies. Music to the ears. Great videos. Thanks!
@southernmike3265Ай бұрын
Have 2008 bonneville 865cc with staintune exhausts, upgraded air cleaner and pollution removed. With just these few changes it sounds better, is more crisp and responsive. Best bikes in the world 👍
@YouMotorcycleАй бұрын
I had a carbureted Bonneville shy staintunes, a similar setup, upgraded CR carbs, aftermarket suspension front and back, and a custom finish I did. It was a great bike! kzfaq.info/get/bejne/Y52ahb2Iz7vZp6s.html
@southernmike32659 күн бұрын
@@YouMotorcycle yeh standard rear suspension is pretty ordinary. Upgraded to ohlins. Forgot to mention that. One of the better improvements.
@brentonnick50522 ай бұрын
I have a 2020 t100. I put 18 inch short slip on. It made a little louder. I had pea shooters on it when I bought it. I actually love how it sounds now.
@YouMotorcycleАй бұрын
Nice! What 18" slip on did you get?
@nikitis138 ай бұрын
That all depend on the firing order of each of those bikes... I dislike loud 270 degree parallel twins like the Enfield but don't mind loud transverse twins (Moto Guzzi) and the 360 degree Triumph.
@YouMotorcycle7 ай бұрын
Great point! Engine config really makes all the difference. For some reason I never cared much for a loud in-line four, but a louder v-twin never bothered me. We're all got our own quirks I guess :)
@andrewhannam.8 ай бұрын
When I had my 900 Thruxton first thing I did was a get the Arrow 2-2 map and Dominator sport slip on...... Sounded awesome!!!!!
@YouMotorcycle7 ай бұрын
Hey Andrew, thanks so much for the tip. I'm assuming you did this with a Power Commander?
@andrewhannam.7 ай бұрын
No Triumph had factory maps for the Tor, Arrow 2-2 and the Arrow 2-1
@YouMotorcycle7 ай бұрын
Oh cool. Straight from the dealer then. 🙂
@lucianogehring11736 ай бұрын
You mean remapped the ECU?
@karlsquire81488 ай бұрын
Good vid I enjoyed this good mod, I was unaware of this mod for the Bonneville, I do have Tors on my Bonneville already. 1 thing I'd like to point out if I may, that back firing is not something new, its that cat burning off unspent fuel as it was designed to do, the difference now is , you can hear it with the exhaust gutted. My Bonne does it with the Tors and my Royal does it with the Emgo Hooligan exhaust as well. Even with a Booster plug that allows your bike to run richer both my Triumph and my Royal have the decel pop :-) I like it.
@YouMotorcycle7 ай бұрын
Hey Karl, thanks very much for the comment and for the info on your bikes. Do you happen to know if your bike got the TORS mapping from Triumph on install? Merry Christmas!
@karlsquire81487 ай бұрын
@@YouMotorcycle Merry Christmas. I bought the bike used with the Tors on it, the person I bought it from said he mapped it himself, so that been said I'm not sure if it has been done although the person I bought it from seemed like a good honest straight up person and the bike runs well so I think it was done and he did it him self. I think he said he down loaded the map from Triumph.
@YouMotorcycle7 ай бұрын
Understood and thanks Karl. Merry Christmas!
@BenandEthan19 күн бұрын
There is no cat on the aircooled bonnies. Only the water cooled ones which didn't come out until 2016
@RoadReality8 ай бұрын
Neat! I've always heard of it, never seen it done. I mean, it's not like I'm gonna do that to my Harley, because I like the quiet... but maybe the Vulcan 800...
@karlsquire81488 ай бұрын
I have a 1999 Vulcan 800 Drifter, I pulled the Baffel on it and took all the wrap off it, it sounds really nice now.
@YouMotorcycle7 ай бұрын
Hey John, I think you should put some loud pipes on that Harley, to help drown out the other noise source in your videos 😂 Cheers brother. Merry Christmas and much love from your buddy up north!
@RoadReality7 ай бұрын
@@YouMotorcycle Merry Christmas, man - and HAHAHA, yeah, 'cause the audio is SO EASY now, I need more challenge? Don't worry... I'll be challenging myself in some upcoming videos... it's gonna be awesome [I'd say epic, but THAT is played out]
@HarleysDinersRides7 ай бұрын
It's great you can do these mods yourself. Merry Christmas and we see you in the new year. Dave
@YouMotorcycle7 ай бұрын
Thanks Dave. Merry Christmas to you and yours. Hope we cross paths this year!
@HarleysDinersRides7 ай бұрын
I'll be working our HOG Chapter display in the PFAFF HD Booth for the weekend at the International bike show Jan 5, 6,and 7. stop by if you go. Cheers @@YouMotorcycle
@YouMotorcycle7 ай бұрын
Hey Dave, sorry I couldn't make it. The missus and I got sick so we've been home for a week now.
@HarleysDinersRides7 ай бұрын
Hope you both are feeling better. we had the same and missed the first two days of the show. Cheers
@YouMotorcycle7 ай бұрын
Still a little yuck but testing negative and good enough to go out and rejoin society now. Hope you guys are better too!
@Confedyank7 ай бұрын
It looks like this round is really RE vs Bonnie. Moto Guzzi seems shoe in. And leaning towards bonnie since it has exhaust mod, still gonna need to do that to the RE for it to stay in. And tbh, I feel until you swap the exhaust on it, fix filter box & flash it, RE won't keep up with highways enough.
@kdsowen28826 ай бұрын
Back in the late-70's / 80's I rode Dukes with conti's . They Bark , I like a nice deep rumble/bark , it's half the enjoyment when pushing a twin through the-twistys ; torque, vibration and sound , you have to Know you are on a beast of some-sort otherwise what's the-point ? Dave nz
@viktorschwarz502616 күн бұрын
Hallöchen Leute... diese Video hat mir sehr gefallen, ich werde bei mir auf jeden Fall das gleiche machen... ich fahre selber Triumph bonneville t100 se black Baujahr 2013, und ich habe noch die original Gurken 😊😊😊.. ich hoffe das die später nicht zu laut sind, weil in Deutschland erlaubt maximal 90 db😅.. sonst kaufe ich db killer 😂
@YouMotorcycle16 күн бұрын
Thanks! Hope this helps! It isn't too much louder, but I have no idea what the decibels are. Good luck :)
@kennethtucker98444 ай бұрын
So what are you planning on doing, when the MOT is due for renewal..!!
@YouMotorcycle4 ай бұрын
What's an MOT? Is it some kind of mandated government recurring inspection? This is Canada, we have freedom not fascism lol. None of that here.
@EpicAdamMotovlogs4 ай бұрын
@YouMotorcycle 😆 I love the reply. We have to make sure our vehicles are safe for our pothole riddled roads here in good old Blighty. So we undergo inspections once a year. Oddly enough, vehicles over 40 years old are except
@YouMotorcycle4 ай бұрын
@@EpicAdamMotovlogs thanks Adam! Sounds like the question was totally valid, but the assumption that everywhere is the same was silly 🪿
@BenandEthan19 күн бұрын
MOT won't be affected. There's no set decibel level or emissions test on an MOT.
@K_P672 ай бұрын
Dude is just ripping around 🪦 RIP yards to record audio
@YouMotorcycle2 ай бұрын
nah. hardly ripping around, not even doing the road speed limit. but i live in the most densely populated city in my country, so, there's no unobstructed riding on the road. This is the only spot I can go where I won't be stuck in traffic unless I ride for 30+ minutes away from the city.