Great sound & comparison test. Most people test in a different setting which changes the sound. GJ.

Superb video Tony! You should have a mainstream TV show my friend!!

Another great video! Looking forward to your next one... Cheers.

Excellent as usual Tony. Nice video!

Brap brap, great tutorial as always! 👍🏻

I got it and it makes the scrambler a better bike. The sound is much better and it accelerates much faster.

Nice vid. Keep them coming

Can you get anything similar for a 2010 Bonneville? I think it would sound great paired with my Tec bike parts 2-1 exhaust!

Hi and Thanks for your guide! I installed by myself this fantastic gear on my Street Scrambler and I noticed great sound, lower shield temperature and more hp. The only negative aspect is a little loss of torque at low RPM, but maybe it's only a wrong impression. What do you think about It?

nice review. good sound and a worthwhile mod.. I do like the look of the SS. Did you swap the Street Twin?

its already for sale, how must it cost

Hi. Did you measure the exhaust pipe temperature before and after the new decat pipelines installation?

Tony, I noticed the exhaust pipes in your bikes are spotless. Mine, however, have developed several stains right on the curvature as they comes off the engine. Do you do anything to your exhaust pipes to prevent this. Or do you clean them with some product you can recommend?

Great video 👍

I pick up a new scrambler next week and I've been dooing my research and watching all your great videos, do you know if there is also a way to remove the baffles from the original pipe on the scrambler ?

Hi Tony, great video mate. I installed one effortlessly on my street scrambler using your video. Very helpful indeed. Thank you. One question: the H-pipe seems to get very very hot on that u bend. I've read that it reduces heat as the cat produces a lot, but it seems hotter now. Is this your experience?

A year later I went with the British Customs De-Cat Pipes and wrapped them. (they have a nice Stainless finish but wrapping was in my plan) The stock cans are strait through. They give the ability to look stock (they are), but if you open the throttle moderately or harder, they are strait through pipes. So if I'm sitting at a light and a squad car stops next to me, I can take off easy and it sounds stock. I added the boost plug but a CPU re-program is on the back burner. I like the look of the stock cans too and I'm never going to be as loud as the Harley's around here (N. Nevada) so why even try? The extra kick from De-Cat and the boost plug is palpable. Great idle and no snatchy throttle and...Yowza. I also added the Progressive front fork springs and THAT was a very welcome difference also. Very easy to DYI also. Mine is a '22 and a good bit of re-molding to fit me, I'm 5'7" and for appearance. I plan to make a short video soon but as long as I have it, it will always be work in progress. I've watched many of your videos and consider you a top source for Triumph "how to's". many thanks and appreciation for what you do.

Hey Tony, is the temperature of the black shield on top of the cat converter lower now?

Do you know if this will work with the V n H pipe for the Scrambler? Thanks

I'm thinking about getting an h-pipe or british customs slip-ons. I want a better sound and some performance upgrade. Which would you recommend?

Me personally that centre weld just ughh. It looks rough The gp exhaust welds are nice and if it looked like that id be liking it more. Aside from that sounds great and good spannering and description.

How did the pipe look after being aged on the bike. Did it blue like the stock pipe or turn black? (BTW I have that same helmet for my Harley LRS. Lots of comments on it)

Great video!! Is it the sound less deeper? Or is It the same tone but louder?

Hi what affect does it have on the spart plugs reading, colour does it make the bike run leaner which could damage the engine. thanks andy

Lawd That weld was it done with a soldering iron.

to dismantel all you need inch spanner ? or normal spanner ?

Can the same wheels Of the scramble be use in the street twin ?. Meaning if they fit

Does anyone know how this compares to the British Customs competition headers? I'm trying to figure out the difference but noboday leaves reviews these days....

Standard bike sounds good but the H-pipe sounds better, has a nice "brap" to it. Does the mapping require any work or is it a straight swop job.??

Nice sound

Good vid, did you notice much difference to the heat levels?

Will the Scrambler exhaust fit a 2016 T120 ?Cheers

Can you reuse the header gaskets or do you need new ones? Are they included in the kit?

Would this modification change the emissions for mot testing?

Hi! I have a Vince & Hanes terminal, should I remap if I install the Free spirits pipes? Many thanks in advance.

Hey Hi, I just bought & added my street scrambler 2018 with 2-1 slip-on from Vance and Hines designed for street scrambler hoping that it would sound better, started bike and it sounds exactly same as stock exhaust even less richer, what a waste of money ( though bought from eBay half the priced ), due to lack of knowledge about CAT being the culprit here I ended up spending on Vance exhaust, Is there anything I can do , as not sure if I can afford to spend more on free spirit to remove cat, or is it the only solution? Basically bike just sounds great with free spirit and didn’t had any need for Vance exhaust separately, Would appreciate your thoughts on it, I live in Uk, London Cheers

Tony, should the bike be remapped when pipe is fitted?

Does it give you any more power? Is it just for sound? And weight saving.

Is the ECU happy after installing H-pipe? Throttle response better??

Would the H pipe work with the Vance and Hines pipe fitted to the bike

Is this a 2019 SS? I have a 2019 model but unsure if I have the right cat box number to do the swap. Does anyone know ?

do you have an idea of the DB level after the installation ?

What can you say about fuel consumption? Does it increase much?

Hi What Torque Wrench would you recommend?

I ordered the decat, it comes with 2 o rings in cooper.. 🤔🤔 you don't talk about it? Should I install it?

Did you need to use a new seal or you don’t need too?

Why can’t I find this for my 2014 t100...damn.

Where do I get this? Please answer me

do you have to remap ECU?

So the Street Scrambler has 2 Cats? One at the bottom and one shown in this video? So you have put a Motone X pipe and a H pipe here? Have I got that right ?

Does this pipe give you more? HP? Is it just for Saving weight and sound.

Hello I am from Brasil and how can i bay tais part Thanks

What do you think fam, is it better the British custom or this one. Or both are the same

ECU adjustments needed?

Sweeet!

It works with Vance also?

Sounded better stock. No brap needed or wanted.

I like stock pipe sound :/

That's a hideous weld on the curve. I could never live with that.

Hello Tony, great tutorial!!! I have one small issue and I need your help. I've brought a street scrambler a week ago, and I've been trying to order the H-pipe but no chance. Tried different dealers but couldn't order it. Do you know which one from Free Spirits list have the de-cat ? Thanks in advance

A one eyed pakastani brick layer welded that Lawd. Good vid. 😂

Weld on down pipe is ugly the other pipe is bent without any ugly welding on sight. The cat was there for a reason now the fumes are socialy unacceptable?

Why would you decat the bike? Do you know how much worse the exhaust gases are for your lungs without a cat? And also for the environment?

What an egoist accessory..