No video
troubleshooting laminating problems solved
Рет қаралды 27,675
Күн бұрынIndustry expert David Goetter shows a brand new over laminate material from Advanced Greig Laminators. This material is one of my personal favorites because it solves so many common mistakes in over laminating. This is an educational and promotional video. Understand print curl, necking, film tension, elongation, and print registration of vinyl decals when mounting.
@as6488 4 жыл бұрын
Hey David, I've been watching your videos and already gained experience. Thanks. I 've got myself into a strange issue: some very small bubbles, visible only AFTER adding the photo (printed with Canon Pro 100S - absolutely flawless and already inside adhesive film) onto acrylic! Those very small bubbles are visible ONLY if the acrylic is set into a frame with led's (all 4 sides set with 3000K led's warm white light). This is a special project of mine, printing photos to acrylic (in this case - 8mm thickness) and insert the plate into an aluminium frame with led film.
@robertc7524 4 жыл бұрын
David, are you still dealing with laminators?
@teabagNBG 2 жыл бұрын
im buiyn my prints from a shop and they actually pretty good but im not satisfied with the laminate... there always is some area where there is some kind of STRIPE across the whole sheet where it seems like the laminate isnt pressed against in the same strenght... what this could be?
@Mr_Chuckles 3 жыл бұрын
Superb
@hashimbaloch3760 5 жыл бұрын
Good job👍👍
@goetterdone 5 жыл бұрын
Thanks Hashim
@thomasrocksit9775 2 жыл бұрын
where can we buy this ? where is it located ?
@noahwoods9916 2 жыл бұрын
AGL Deforest, WI
Graphic Finishing Partners LLC
Рет қаралды 22 М.
Makers Mashup
Рет қаралды 9 М.
Friendeez
Рет қаралды 21 МЛН
Graphic Finishing Partners LLC
Рет қаралды 8 М.
Photolux GmbH
Рет қаралды 57 М.
Wrap Advisor
Рет қаралды 10 М.
Lamination System
Рет қаралды 3,2 М.