Troubleshooting Sensor Pairing Issues for TPMS

Рет қаралды 84,056

Күн бұрын

Guide to installing a tire pressure monitoring system (TPMS) including changing pressure and temperature units, swapping sensors between tires, and most importantly performing the sensor pairing.
Note:
You may be able to successfully pair the sensors without taking the batteries out of all the sensors. I believe that you may be able to pair it just by going to the Sensor Pairing menu, pressing the M button twice so that the lower set of numbers blink, and then simply installing the corresponding sensor to the car tire. You can try this first, if it doesn't work you can then try removing the method of removing the batteries from all sensors before pairing one by one.
00:00 Introduction
00:57 Unboxing
02:46 Menu Options
03:48 Setting Pressure Unit
04:43 Setting Temp Unit
05:06 High Pressure Alarm
05:40 Low Pressure Alarm
06:00 High Temp Alarm
06:27 Swapping Tires
07:50 Factory Reset
08:31 Sensor Pairing

Пікірлер: 202

@stephenhobbs7892 2 жыл бұрын

Instructions with my unit were very poor. Your tutorial is brilliant.

@giovannam925 2 жыл бұрын

I know right!

@HighImpactPromo Жыл бұрын

FINALLY! Something that utterly clarifies & details all of the inherent mysteries of the External BT TPMS units! It took me far too long to find your video & learn how these sets work. Thank you for sharing!

@roadrangermy4354 Жыл бұрын

Glad it helped!

@CptAwilliamse Жыл бұрын

You just added more value to this rather cheap gadget. Now we don't have to throw this away if something goes wrong. Thank you very much.

@danielglover33 2 жыл бұрын

Best demo of this device I’ve seen. Thank you. Very informative.

@capicompean 2 жыл бұрын

Aside your magnificent explanation, your pronunciation and clear diction makes more valuable your video. Tanks. By the way, I paired the sensors successfully

@giovannam925 2 жыл бұрын

I was going to state the same thing! And his voice is pleasant too.

@marcelopacheco4486 2 жыл бұрын

Excelente Explanation, with detailed info about the 7 menus

@Sateena911 Жыл бұрын

Thanks bro you really save my life i was totally exhausted trying to pair the 4 sensors .. it was giving me low battery symbol but after pairing by your way it finally worked .. thank you very much 🥰

@gavenchan 2 жыл бұрын

Great demo and explanation. Thank you!

@stackemhigh1 4 ай бұрын

AT LAST !!!! Seems like the only person in the whole world that knows exactly what setting 6 means!! Have searched EVERYWHERE to no avail until I found your video..well done sir and a thorough "walk thhrough" of how to pair them..A BIG THUMBS UP to you😊😊😊😊😊

@obicoke1810 6 ай бұрын

Brilliant instructions for pairing your Tyre Pressure Monitoring System. 👏 👍

@kneebarx Жыл бұрын

wow this is amazing ! even the people that sell this and the manufacturers can't explain how to pair The sensors

@jadsonxavier1300 Жыл бұрын

Thank you, it helped me a lot here in Brazil

@johanbenade1948 2 жыл бұрын

Nice explanation. Many thanks.

@giovannam925 2 жыл бұрын

Thank you so much for doing this video! I went and checked all my batteries and labels. They were correct. 🙂. The readings for me were off by like 1psi not too bad.

@Greenshrekinthemountains Жыл бұрын

Thanks! More useful that the instruction manual 👍

@hktay7684 2 жыл бұрын

Thanks. Very clear instructions.

@tobatcastro171 4 ай бұрын

It wasn't cooperating with me when I got it in from shipment so i did a hard reset from the manual but it only made it worse. It's only picking up the front left and rear right. Hopefully your video saved would save me from running it over. Thanks bro .awesome on point tutorial!

@vijayantgovender2045 2 жыл бұрын

Thank you for sharing your wonderful video I am watching from South Africa

@daledan 3 ай бұрын

This the the tut that i was looking for!!!! The rest of the vidoes on yt were just unnecessary crap!!! Many thanks mate..

@bigwolfmarketing3304 8 ай бұрын

It worked.. thanks a lot. Mine was blank for weeks now fixed thank brother ❤❤❤❤

@AriffAffendi Жыл бұрын

Thank You .... awesome turorial mate... good job with the crystal clear explanation. been suffering from acute headache for the past 2 hours upon opening the box and now the headache is now gone instantly. keep up the good work. cant thank you enough.. u save me from another white hair 👍👍👍

@hoangduy92 2 жыл бұрын

You help me solve my pairing problem. Thank you very much

@glennganuelas7953 Жыл бұрын

thanks for sharing this! i’ve been struggling with the pairing

@lmsystema 6 ай бұрын

THANK YOU DUDE...Your tutorial save my live, it works like a charm, after trow 3 of this ones on the trash, for dont know how to solve this problems! Thank you, thank you alot!!!

@Dr4ke1 Жыл бұрын

Thanks for the clear explanation

@MattCarrasco 2 жыл бұрын

Great information, Thank you!

@lasurvivor47 2 жыл бұрын

Thank you. Good explanation!

@alltimegoldengreats Жыл бұрын

Thank you very much you have saved me a lot of time with this video 👌

@Kimisawadeen Жыл бұрын

Thank you for the wonderful video Sir. 👍

@lDARKH3ARTl 2 ай бұрын

Very helpful video

@robertoplowman8888 Жыл бұрын

Thanks so much. Great video and explanation 😊

@rash383ify 2 жыл бұрын

Great.. solved my problem. Thanks a lot

@dean9548 Жыл бұрын

Thanks for the tutorial 👍🏻

@adamumar4090 Жыл бұрын

Very informative, thanks 👍

@parthachakraborty5475 Жыл бұрын

Thank you. Awesome video.

@yudikristian2323 Жыл бұрын

Very helpfull , explain clearly & the problem solved👍 awesome

@willwec 8 ай бұрын

You are amazing man, help me more than instruction menu of the product, I'm your fan

@eddymarin9019 Жыл бұрын

Muchas gracias, logré vincular nuevamente los sensores de mi moto. Gracias mil.

@EvanR7028 10 ай бұрын

Muito obrigado! Apenas o seu vídeo forneceu as informações que eu precisava!!

@narfnn2111 11 ай бұрын

Very very nice tanks a lot!!!!!

@rolandpeter8067 Жыл бұрын

Thanks for sharing sir... finally works..

@micheltorisaen9605 2 жыл бұрын

Thank you for this video

@rudywawrinka8926 Жыл бұрын

Thank u, finally I understand all those buttons r made for. Gbu

@scottwoodhouse5515 Жыл бұрын

Thank you, that made it much easier 😉

@tntxxplosive Жыл бұрын

Be blessed man !!!

@Maca115070 Жыл бұрын

Well done 👍

@lukenapier8406 2 жыл бұрын

10 mins of working out why three wouldn’t show anything, didnt even think to check the battery’s 🤣🤣 thanks man. helped heaps

@muhammadminichemengg Жыл бұрын

Very helpful ❤ i reset my Tpms😊

@khunrot8025 Жыл бұрын

Well, noted thank you for this video.

@atifmahmood2009 2 жыл бұрын

too good... really trouble shooter... as I could not get the reading... I paired as per your advise and it suddenly it started showing off the reading.. so thank u so much for saving my money as I was about to throw it out of the window...

@roadrangermy4354 2 жыл бұрын

Happy that I could help!

@owaiskhan Жыл бұрын

Very Helpfull

@youtubesub4461 Жыл бұрын

I was trying to figure out pairing when I came to this video, it didn't work but then I went to my manual and it said drive to 20km/h and they will all auto pair, indeed they did. Good video explaining rest of the features

@razifraser4245 2 ай бұрын

How you did that? Can you explain the steps..

@zukh5814 2 жыл бұрын

This video is super helpful, tqvm! The manual provided sucks!

@cocolandstudio Жыл бұрын

thank you so much

@ezhans 2 жыл бұрын

Thanks much!

@sok9san947 Жыл бұрын

Thank you

@tonykwon9260 Жыл бұрын

Glad I found your video.. detailed explanation 👌

@bobabooie6389 Жыл бұрын

Thanks 👍

@GomesStore 2 жыл бұрын

Thanks forma Brazil

@williamhorton9700 3 ай бұрын

Thanks for the video. In my case I have the small cigarette lighter reader plus 4 sensors. One of them needed to be replaced and I had a spare but only showing flashing 00

@EduardoRamirez-ni8il Жыл бұрын

Per the manual you go to menu item 7, then press menu 2 times and drive car to for 5-15 mins. to pair the sensors

@slinkydonkey 4 ай бұрын

Thanks this is a good video. However I had already installed the adaptors onto the tyre stems. Now they seem to be stuck... Also I can only pair two of the tyres I kind of wish I hadn't bothered if it was going to be this much trouble.

@user-jm1xp6vg3d 11 ай бұрын

this was a great explanation on how to use this. I am wondering if you can answer a question.. my unit instuctions says "pressure copes 14-87 PSI". I am wanting to use this for a small tent trailer single axle. (I don't find the range anywhere, however hoping this is possible..) I am about to purchase new tires but I have read that often max PSI for trailer tires is 85PSI (and I have seen at least one that was 90PSI). Does that mean that this unit will not go higher than 87PSI? Therefore it won't work for higher pressure rated tires? Also, when I try to program the low end of the PSI, the highest PSI I can put in is 35PSI which would seem not to help at all with the higher pressure tires. I don't know much at all about tires, but any help you could offer would be appreciated. Thank you for the excellent tutorial!

@ianredondo6524 3 ай бұрын

Hi. I lost a sensor, and got a replacement which i bought online. Is there a way to sync/pair the replacement sensor to the host?

@Jezza1656 7 ай бұрын

Hi just wondering if there is a signal booster as I have a large caravan that they are fitted to and when monitor is in my jeep I donot get updated information?

@hcling2765 Жыл бұрын

Hi, first off, thank you for making this instructional video. One of my sensors unfortunately suffered from water corrosion and I subsequently purchased a replacement unit. However , after following the steps you showed to pair the sensor it was to no avail. Suspecting that perhaps the battery was faulty I even switch to one of the existing batteries which are in working order but still was not able to pair it. Is there anything else that I can do ? Instead of scanning for it can we manually set the number ?

@jeremiahheredia3190 3 ай бұрын

what is the trouble shooting for 3 sensors showing 0 psi and one showing the actual psi? are the batteries going low?

@donmonasterial1863 10 ай бұрын

What do you think is the matter when the RR pressure on the reader just isn't showing anymore? This is just after about 2 weeks of normal display. What should I do?

@nickaxe771 7 ай бұрын

I have the same sensor but on a motor cycle so only 2 sensors and a small main display....the front sensor will not connect with the main unit.....the battery reads 3v on my battery tester.....any ideas guys.

@user-yu5sn7re5q 5 ай бұрын

Can we plug all the 4 sensors first on tyres, after that we do pairing one by one?

@primojun Жыл бұрын

hi.. just bought the external sensor... and later on bought the internal sensors only . is it compatible with the unit?..

@shri1081268 11 күн бұрын

How to change the pressure value shown at the display

@kevinudian Жыл бұрын

Thanks for the video Bro! Mine only couple months old but since day 1 the FR always shows 6 psi more than the rest i took them off today and factory reset it, not the sensor ID are all showing 00.00 and wont pair. Any idea? Pretty sure it's not the battery as it's fairly new.

@irfansensoy5901 6 ай бұрын

Hello, the measurements of these devices are generally different. Even if all conditions are equal and tire pressures are the same, it shows different pressure values on the screen. Is there a calibration or +/- correction factor for this?

@dnee Жыл бұрын

How to get back to reading sensor from the setting menu?

@richmondamartey9566 3 күн бұрын

Hi, mine still blinks and does not pair (all four sensors), I think I will get new batteries for each sensor and try again

@babarkhalid2746 5 ай бұрын

in menu no. 6, My device is showing all zeros at bottom, it doesn't even show pressure, what could be the issue?

@smartunnel 2 ай бұрын

I have the same brand but mine cannot be reset. It can't go thru those 7 menus. Is there any other way to reset it?

@kaelangel9520 10 ай бұрын

Hi sir, why my RL the number still not chnage eventhough i alredy fill in with air

@djdonpillai Жыл бұрын

I’ve follow ur steps and did factory reset but after that not able to pair … it doesn’t pair even after removing and installing the batteries

@scmmotorhomers2386 Жыл бұрын

Hi I never explain myself right can you tell me what is the maximum bar or psi does his equipment go because on my motor own it will not take it up to 80 psi thank you for your time

@narainsamygovender6494 2 жыл бұрын

Great Explanation Sir. Love it ! I have aftermarket internal sensors. The lighter plug in monitor beeps continuously and only one wheel reads which is also incorrect . Can this be repaired? Or should I just put in a new external one. Thanking you in advance

@roadrangermy4354 2 жыл бұрын

Sounds like you might have 1 bad sensor, personally I would replace it with an external type unit since it's easier to take out and check etc.

@dimuthjayawickrama Жыл бұрын

Your video is so helpful. Thanks alot. Can we calibrate the sensors? One of my seniors read 2 psi higher

@roadrangermy4354 Жыл бұрын

No you can't calibrate the sensor unfortunately

@hamza49483 5 ай бұрын

2 of my sensor showing same identical identifier? What is wrong here. Im talking about the option 6 in the menu . Tire 1 and 3 has the same identical identifier.

@lmh-mv3ec Жыл бұрын

Hi, thanks the video where can i get this?

@DamianYesiolow 10 ай бұрын

I have the 2wd version for elecric scooter, working ok but shows wrong pressure. When tires are inflated to 4bar it showing max 3.1 for front and 3.5 bar for rear tire. Is this possible to recalibrate? Maybe sensors are broken :/

@roadrangermy4354 8 ай бұрын

These sensors are not accurate, you can use them to tell you if there's a puncture but don't rely on them for accurate pressure measurement.

@nigelburch9388 2 жыл бұрын

Thank you, Just saved my marriage 😂

@roadrangermy4354 Жыл бұрын

lol!

@GJoseph Жыл бұрын

If I need to pairing only one (RR) of the sensors, do I need to remove the battery of the 3 sensors (FL FR RL) that already pairing?

@roadrangermy4354 8 ай бұрын

No you don't actually need to do that.

@MegaMoon888 Жыл бұрын

But when I go to menu 6, my device behave little differently. When I press menu it starts blinking the code below with respect to the tire number...and it doesn't stop blinking...I can switch to next tire by right key...it can go to rest of tires...the code.below each tire keep blinking...it doesn't stop...or pair the way you have shown on screen...

@rodrigopineros6016 Жыл бұрын

Very nice video, helped me a lot, just one question, does the device charges even when is off?

@roadrangermy4354 Жыл бұрын

The in-car reader unit does

@jonjonmd Жыл бұрын

do you have a tutorial on how to replace the internal battery from the main panel? mine is not charging from solar or usb anymore

@roadrangermy4354 Жыл бұрын

Hey jonjonmd, no I don't, I've never opened mine up before. The batteries are not meant to be replaceable inside the receiver unit but I reckon that it most probably uses a cheap 1-cell lithium ion battery in it. You could probably get a similar battery from eBay or Amazon and solder it in yourself but I would advise against it because if you don't get the battery specs exactly right, you could risk an explosion when the solar tries to recharge the batteries.

@scmmotorhomers2386 Жыл бұрын

Hi I wonder if you could help me I brought the tire sensor When the sensor connects to the wheel the tyre pressure does not go up to 80 psi it only shows on my monitor 50 does this equipment does not go to ATPS I look forward to your comments

@roadrangermy4354 Жыл бұрын

Oh that's a good question, I actually have no idea. Are you using it on a motorhome? I think these cheap sensors are made for cars and may not be able to handle the pressure of heavier vehicles. You may need to look for TPMS sensors made specifically for heavy vehicles.

@danilomolleno8678 7 күн бұрын

Tried your tutorial but still same problem tpms is not pairing with the sensor. Also tried to check the batteries with voltmeter no problem all all are reading 3 volts. What seems to be the problem. Thanks

@malulo Жыл бұрын

I inflated my 4 tires to 36 psi. 3 sensors agree but the RF shows only 31. I haven't paired the sensors but if I install the RF sensor in another wheel it keeps showing 31 psi whilst the original sensor showed 36 psi, therefore I concluded that the sensor is defective because being the accuracy 0.1 bar= 1.5 psi it is way out of range. Now if I buy a replacement sensor from another supplier which shows an almost identical monitor, would it work with my kit?

@roadrangermy4354 Жыл бұрын

Your mileage may vary with this - these aren't super stringently manufactured devices and many of them are just different factories copying from one another. It might work or it might not work - it's really not possible to say.

@zaiedulhoque9487 Жыл бұрын

Thanks a lot for this valuable explanation all over the whole internet I was looking for. Now I would like to add a query which might help others too and it is a bit tricky and exceptional requirements. My scenario is, I've used external TPMS sensors previously and after a year, the main machine was useless so I bought a new TPMS with internal option. Now anyhow one of those four internal sensor got battery discharged which I came to know after disassemble the sensor. Now at this moment I have those old external sensors fine but the old TPMS machine was faulty, in this case "Can I synchronize any of my external tire sensor with the Internal TPMS machine anyhow which can help me to sustain few more days with a complete TPMS setup ?" If so, please guide how. It will be really helpful and thanks in advance.

@roadrangermy4354 Жыл бұрын

You might be able to use the internal sensor's reader machine with the external sensors because I think that all these are manufactured by the same company in China, but I can't tell you for sure whether or not it will work. Give it a shot and see if it works.

@zaiedulhoque9487 Жыл бұрын

I have tried to do it and it works. Just what I did is, at first reset the device as DEFAULT as your advice but that option I found in menu serial 6.

@rfkees 9 ай бұрын

Hello, thanks for the great video. Is there a way to set the low pressure alarm below 17 psi. I wanted to use this on a vehicle with tire pressures around 12-15 psi so the alarm constantly goes off.

@roadrangermy4354 8 ай бұрын

I'm not sure if this is possible, the lowest number it shows is probably the lowest it goes to

@orangeduc3129 Жыл бұрын

Available in Ghana?? Please thanks for your kindness

@vijaymohan2932 2 жыл бұрын

Great video! Does this device switch on automatically while driving or need to switch it on manually everytime?

@roadrangermy4354 2 жыл бұрын

I personally turn off my in-car display unit if I park at home or if I park anywhere where there is no sunlight because keeping it on while there's no sunlight drains the battery fast.

@tristantan6653 2 жыл бұрын

Sir what if my RL sensor has the value 00 even after factory reset and sensor pairing? What is ths problem? Thank you.

@roadrangermy4354 2 жыл бұрын

It could be a dead battery on the RL sensor, try swapping the battery with another sensor that you know is workign and see if the RL sensor works. If it still doesn't work, it could be a faulty sensor.