In 1967 Me a friend&2 girls were in my 1959 Pontiac.....I went to turn around it was the hardest rain I had ever seen,I could feel the car sink...No phones near,Next morn a man in a nearly new Tempest gave us a pull out...a very nice&kind man,I'm still grateful😊,Not many as that nice anymore😑.

I strapped a pair to my shoes now I'm climbing mountains.

Are there videos of this ripping through a fender or quarter panel?;)

I usually tell the wife to push, works every time.

They'll work in deep mud, to a point--if you're stuck on level ground... but for really muddy, slick ground, trying to get up a hill we couldn't get them to work. The truck was an older F250, and we only succeeded in pounding the truck so hard the exhaust broke loose at the catalytic converter. We tried the truck claws twice on wet pasture land, and in neither case were they effective at moving the truck forward; they just dug very deep holes in that terrain.

This works so well, I bought one for each tire and leave them on all the time.

i use 1" by 4" aluminum With $10 tie-down You can buy the aluminum in Home Depot for $10

"vs" implies you're showing two products

Whenever someone selling off road shit has an Aussie accent I automatically assume that it's good.

I use these to get my shopping trolley unbogged at the supermarket car park. 5/5 would recommend.

Not a bad idea under the right circumstances & having the right wheels that they'll work with.

I always fit them when I am driving home from the pub , they help to keep me awake 😴

Heck put about 5 or 6 of them on the back of both rear tires before you get stuck!

I just bought 4 of these things! they are amazing, only $30 too! ONE single 2x4 and 4 straps at the home improvement or hardware store and youre in business.

Thats an old trick. I been carrying a piece of 2x4 with strap for atleast 20 years now.

Wish I had these when I was younger! Got stuck soo many times

I used take my girlfriends mudding . I used to get stuck in the mud all the time. So they thought. Get them in the back seat have our own fun then when we where done I'd climb back up put it in 4 wheel drive and crawl out and go home. 90% of the time worked every time.

A 2x4 works really great and ratchet straps are cheap.

Truck claws do not work in soupy mud; found this out 11/13/18.. Duramax 2500 was on the frame in 4x4 mode completely stuck unlike in the video. The device was installed with wood in place like video and the strap broke when the device grabbed the wood. In the video the second truck surly wasn't in 4x4 in the beginning. After the claws were installed the truck was then put in 4X4 so obvious... Frame the entire truck in 4x4 and then post a vid of how good they work...

I've been driving back roads since I was 16 ... got my 1974 Dodge Valiant stuck SO many times :) ... one of the first tools i ever bought was a medium size electric winch, (it's a 5000 pound modle) I rigged it up so it was portable, with a base plate, jumper cables, and a ball hitch ... saved my ass dozens of times since, after i got a pick up truck, I added a couple pulleys and a spare battery some rigging etc.

Wish I had these yesterday, I was driving near lake which I thought was dry until my durango sank into stickiest mud I have ever seen.

I use a 2x4 and a strap.

I have used a two by four piece of wood that I carry in my jeep and a strap

I run 18x39.5x15 superswamper boggers on my bronco. Never needed something like this... but 3 inch channel iron and 2 bolts and a ratchet strap says ill have a set just for fun.

Unless you've got a lockable diff surely you'll need two of them or the power will flood to the wheel without one on? I've improvised solutions like this with rope which have proved effective providing the ground is not ridiculously bad.

A simple yet very effective design.. Brilliant

I use these on baby's pram, gets it unstuck every time. Highly recommended.

OH MY GOD! This is absolutely BRILLIANT!!

Did anybody see what it did to the ratchet Handel one time use

I've used Firewood and ratchet straps before on my Ml430 stuck in snow

great idea, but it is extremely overpriced !! however, it's a great idea and I will do it myself !!

When the extruded aluminium gets bent under the weight of a land cruiser fully loaded its a once of use. Haven’t bent or broke my max track yet.

Will this work on sand I got a regular ford 2014 xlt I got stuck in sand my back tires thank God someone helped me I mean thank God man I'm looking for traction on sand

I have used these twice on a beach. They compounded the problem, the car dug itself in further both times. Very disappointed. I needed a sand jack and my trusty MAX TRAX both times to save the day.

When they show the extenders and using the log, you can see the extender bend.

Looks like you would want to fit the extensions first up if you think you might need them. Once the claw is full of material it may not be so easy. I can see these ripping at parts of the bodywork. Offroaders tend to fit bigger tyres so there isnt much space in the guards.

Do they bend? Looks like they would especially when the extension is in. Any weight restrictions?

Omg! Why are we not funding this!! What a great idea.

Snow chains bundled up and through the rim would also work.

what happens when the wheel goes up in the wheel well with that thing on probably won’t be pretty max tracks will probably have more use then these would

Title says “truck claws vs MaxTrax” where the MaxTrax video? No comparison if you only show one! So you get a thumbs down,👎🏻

Hola es genial vuestra idea Muchas gracias por vuestro consejo

If there are suspension bits close to the tyres, as in a forester, these things will hit them. But good for other fourbies.

What's Maxtrax? Expected to find out based on the title

Truth be told,, I once just tied 3 kittens to my tire and they worked. But they are one time use.

those look really good, but only if they cost a lot less than chains??? of say add 2llx to each rear tire, and you'd go anywhere

Good on you guy's, thanks a lot

The first problem is that it’s a Volkswagen pickup truck, if you wouldn’t have bought such a shitty truck in the first place you wouldn’t have this issue

I wonder if it already in the market?

What happened s if my truck rims doesn't have holes to put it 😕😕

Need more than one for ice probably, great product👍😀

How would those fit on a vehicle that has brake calipers which fit close to the wheel?? I don't think they'd work in that case.

Very effective! 👍🏻 But a nightmare fore the aloy rim: the metal of the strap destroys the powder coating....

Will it help in snow

Muy bueno ,no entendí como se amarra

There are similar products in the market place, the reason why they don’t sell well is cos they don’t work.

How are they in sand? How about with deflated tires?

Genius idea

I dont see those lasting very long being cast aluminum and all......

I would not use it because I don't want to scratch my wheels but if I had stock wheels I would

How much the price..

be handy if you had a link where to buy them

How would they work in sand?

Does it work in sand?

to the hundreds of people that are saying this product is garbage, you are correct. so just use a 2x4.... duh.

where can i buy truck claws

I think 2 truck claws on each tire would be great

Dónde lo puedo comprar

Don't like the ratchet rubbing on the wheel. If you are constantly using them your alloys could end up with a lot of damage.

Why is the truck moving before the truck claw touches the ground

Australian accents and video from Australia yet the product is made in the USA? It seems about the easiest thing to fabricate. Thanks for the idea I will test it out on my Yoda's and Chevy truck

Works ok I guess as long as you have wheels with holes

Where can I buy one ?

It's good idea. Very help full👍👍🙏🙏

This is exactly why your country is fighting China you're just smart this is just f****** genius love it

Were can I get some

A tool every sod farm should have.

Great idea.

That's cool, just need wheels to get the straps threw the wheel or there useless, not all trucks come with a wider open set of wheels, those are the older styles of wheels now, wonder how they work on factory wheels on snow and ice or even front wheel drive. Just to get out a ditch, would of like to see each time used with a close up video of use and have it split video screen showing how they work and propels the vehicle forward and seeing it close up working. Must be careful due to the brakes and brake lines, you can rip your brake line off and cause more issues than being stuck. Rather call a tow truck than replacing brake lines that if not noticed, then you might drive off and get into and accident now, it could be DANGEROUS if it goes wrong, I wished it explained it in video on how wrong it could go, but it didn't now, how safe are they and has anyone had them fail or cause damages to your vehicle, I've been stuck in mud like that, a 10,000 5 Ton Warn winch with a snatch block didn't get me out. It broke the cable instead. It took a few friends that went down another road that's rocky, meanwhile I jacked up my truck with a floor jack by the rear bumper, then jammed rocks into the holes, then did the front same side, also used 2by8 pieces of wood for the jack and went to other side, it took 6 hours of building a road out, winch was busted and no other trucks could get me out. No tow trucks were coming out in the woods,

Como comprar para representar esse produto

Nice invention.

Все на заднем приводе! А как на передке суппорт обходит?

Oh i need this in my life 😍

Where do you go to order them ...need two of them..

This won't work on a Ford Transit van. There isn't enough room between the disc brake housing and the rim. Tore the strap right out of there. Possibly some other vehicles that it won't work on either. My vehicle is a 2018 T250 Ford.

Why buy it when I can just make it

I learned the hard way with a logging chain and an old tire lol got my 2 ton outta the sand

Good idea mate

I can see how this will become popular.. Easy stow, easy fit and easy removal! Bob's your uncle! 👍

We need more Merv hughes

Could have used these yesterday.

What happens when they take your arch of on articulation? If the tyres fill the wheel arches or on full articulation you might cause some serious damage.

If you have that much clearance and enough money to afford this why not just run bigger tires with better traction?

Been using a 2x4 for years

looks like a winner. love mev 🐴

A real man would use 1 hand and lift his truck out.

Muito maneiro, será q acha, pra comprar, aq no Brasil?!

Great idea!

Quero um, como faço pra comprar?

Semis?