Trumpeter 1/35 T-72 B/B1 Part II BUILD & PAINT
Рет қаралды 16,239
Күн бұрын#scalemodels #armor #tanks
➡️Patreon www.patreon.com/user?u=63530999
0:00 Introduction
0:36 Organizing the build and major assembly sequence
9:48 How to build individual link tracks
22:29 Primer and Paint Running Gear explanation
23:20 MONTAGE Prime and Paint Running Gear
25:29 Modification to base kit and Hull Prime Paint explanation
31:29 MONTAGE priming, pre-shading and base coat camouflage paint
33:57 Recap on the build and paint
@donhansen5677 Жыл бұрын
If I can offer a small tip, count out and join all of the tracks for a single side. Let it dry for around 30 minutes on a flat surface, then lightly brush more glue over the previously glued portions to soften the areas of tracks that you wish to bend to conform to the road wheels. It's so much easier with less track link separation.
@TheBearScaleModels Жыл бұрын
good idea ! I previously made tracks in a similar method i would build the entire run on a piece of tape.. let set for 10 mins ... then using the tape transfer it to the running gear and wrap around. The problem i found was that when making adjustments around the idler.. the track would come apart when fitting... so that is the main reason I use this "make lengths and link" method.
@tankman1814 Жыл бұрын
nice tip man!
@TheFrankie380 Жыл бұрын
A good option for the tracks are Miniart RMSh tracks. Injected plastic, they assemble just like Model Kasten tracks. Easy, well detailed and cheap!!
@user-hk9gh5sk9s Жыл бұрын
Хорошее видео! Понравился способ сборки гусениц. Сам собирал этот набор примерно 2 года назад, деталировка очень понравилась:)
@TheBearScaleModels Жыл бұрын
Спасибо вам большое ! Да договорился отлично модель из трумптера ! 👍👍
@AbstractArmorHLF Жыл бұрын
Very nice. Love the paint color so far.
@modeltankguy Жыл бұрын
wow the tank is looking great so far keep them coming
@vortexmodeling Жыл бұрын
beautiful build!
@jamesrutherford9643 Жыл бұрын
Loveky build as per mate , always good to see other folks techniques and how they do things 👍👍
@TheBearScaleModels Жыл бұрын
Glad you enjoyed it
@devueltaalmodelismo3745 Жыл бұрын
Muy buen trabajo, como siempre
@monsieurmaquette9550 Жыл бұрын
good video 👍
@TheBearScaleModels Жыл бұрын
big thanks for support Monsieur Maquette
@MisterGsWorkbench Жыл бұрын
Good stuff - built one of these Trumpeter T-72s recently and enjoyed it. Well, except those track links...
@TheBearScaleModels Жыл бұрын
awesome thank you... i dont think the tracks are too bad.. but yes a long job ! i have some masterclub tracks lined up for the Brem-1 ... do you know if the meng working tracks fit trumpeter kits ?
@MisterGsWorkbench Жыл бұрын
@@TheBearScaleModels for me the best T-72 tracks were the ones from Amusing Hobby. They snap together and were cleanly molded.
@rickslotboom8827 Жыл бұрын
could u drill the links out? and use coper wire to make them workable? not thinking about the needed time
@TheBearScaleModels Жыл бұрын
Anything is possible... but i for sure would not have the patience to do it. I will buy a set of "workable" trumpeter t-72 tracks in the future for a comparison on a future build.
@kristijancoric3604 Жыл бұрын
Going to look awesome when done, kinda sucks there is no engine offered with the kit so you can show it off with the engine cover open.
@TheBearScaleModels Жыл бұрын
Hi Kris how are you ! yes very few kits include detailed engines. BUT i have 2 very stalled builds both with resin engines on display... maybe i try to finish one soon.
@hansthemodelbuilder Жыл бұрын
hey is it fine if you do a brush painting video airbrush is expensive right now
@TheBearScaleModels Жыл бұрын
I made this video a long time ago... maybe it helps? kzfaq.info/get/bejne/jbaVpMmUqrqyfo0.html
@Anton-cc7yc Жыл бұрын
What a wonderful model - I though… until I saw the tracks... Who did this? Why? Do they hate humanity or something?
@TheBearScaleModels Жыл бұрын
Tracks are typical for trumpeter I like them. More work but good detail.
NONPLA
Рет қаралды 69 М.