Hey hey! If you like to see me rolling, I uploaded the full 3-Phase Dream in my second channel Mehditation you can all MEHDITATE to!! kzfaq.info/get/bejne/g816rK2o1LPQnGg.html

Well I found my new screensaver

Mrs ElectroBOOM: "Mehdi, why are you squatting up and down like that?" Mehdi: "Oh, this? Don't worry, it's just a phase I'm going through."

"This piece of SHEET" Loved that! HAHA

There is a lot of SHEET in this video.

3-phase Mehdi is a must for the Wallpaper Engine!

The way he says "oh now it's on fire" so calmly is like it's an everyday thing for him 😂😂

0:12 I’m now convinced this is precisely how all motors work

The most important part of the video 7:50 . It's healing me psychologically

"seeing is believing" starts to watch a free energy generator video.

$3,000 worth of fancy power supplies make the LEDs go "Blink." Lovely

@3:24 "this piece of sheet" 😂

8:00 This weird freaky thing is actually the most helpful 3 phase explanation I've ever seen. Up until now, I could never quite get my head around how the 3 phases worked together to make the motor turn.

I see you've got acrylic fever, Mehdi? :D The only known cure is MoRe AcRyLiC! Absolutely epic ending.

1:09 "Piece of Sheet" Honestly I thought he will swear and I'll hear Bleep until he said *sheet* 😂

"That's underwhelming..oh, now it's on fire.." Sounds like my typical workday.

Mehdi -- I think you're right at 3:15 about both North and South appearing as solid dark. However, you might be able to "bias" the field seen by the sheet. For example, if you positioned North poles on the other side of the sheet (at some adjustable distance), than at the sheet's location you might get either strong field lines, or minimal field lines, and thus dark or light pattern on the sheet. But also the rate of change (rotation) probably needs to be far slower than 45 Hz.

I think 45 Hz is too fast for the magnetic viewing film, the nanoparticles don’t have time to change their orientation. Maybe try 1Hz

I love how he slowly went from "piece of sheet" to "piece of shiz" as he's getting more irritated

Maybe you can visualise the rotating magnetic field with the following setup. Small reservoir with a tube big enough for the stator to fit inside. Fill the reservoir up with mineral oil and add some iron dust around the tube with the stator inside. If you then connect the stator and turn your power supplies on, you might see the rotating fields. A less viscous liquid or water, may be better for higher speeds.

2:18 "Really a short circuit, eh?" Mehdi being Canadian confirmed

Hey Mehdi, I was thinking 🤔, instead of wrapping the film around the motor, what if you cut a hole the size of the motor in the film then poked it through? That way maybe you could see the field lines in cross section.

The song during the blinking LEDs at 6:55 is Follow Me by Andrew Langdon

Seeing the homemade motor start turning was so cool!! Great video as always Mehdi!

Your channel became my all-time favorite. Much knowledge + much entertainment.

Great video Mehdi! My best guess is that the film takes too long to "decay" between its magnetized and non-magnetized states, so you can't see the changes. Love the LED demo, that was an excellent visualization!

"Oh. It's on fire." Said so casually, you'd think he was reciting an accounting report. Only Medhi. LOL

Loving the new background setup! It's so mathematical!

Love it when he says- "Piece of *SHEEEET* " 🤣

I work at a super high precision brushless motor company and have been having a lot of fun watching your videos on rotating magnetic fields! Let me know if you'd ever like a sample maybe I can convince my boss to send you one HA

The last 10 seconds of this video were seriously the coolest trippy thing I've ever seen!!! Keep up the good work man!!!

It was so coo lto see your homemade motor work! I loved watching it when u first made it and I wasn’t expecting to see it in this video! Can you please do more videos on magnetic fields and rotate into magnetic fields and maybe gyro scopes. Thank you for the good content.

I MUST watch more of your entertaining and enlightening videos. THANK YOU.

Love the emphasis on the sheet

I love how hes so casual about it being on fire. Lol 😆

It’s kind of like the lights at the entrance of the theaters - like how lines go around but it’s just light bulbs turning on and off at the right times that gives it that illusion

7:44 Hypnotic.....and very educational...way....to understand.........the pattern... Genius!

That ending was glorious!

I loved Home Improvement and Tool Time when i was a kid, now i get to enjoy it as an adult, Keep up the good work Tim.

You are a very entertaining teacher/idea man!!! I really enjoy the way you think! Cheers my friend!

This subject makes my head explode. Please do more with it

To effectively see current flow in two different directions, you can do the same except use two different colored diodes on each leg of the wye with one diode connected in reverse of the other. Maybe red could represent north, and blue represent south.

Haha Mehdi, I swear, your videos are a rollercoaster of emotions man. One minute I'm alert and learning, next I'm laughing my head off, then back to serious, then fascination at some of the great experiments. Keep doing what you do my friend! Best wishes to you and the family.

OH! I see you have a new studio to record in, I like it, looks fantastic! Last vid I saw from you I remember you saying you were going to be moving to a new recording space, been a while since I got notified of your videos so this is my first time seeing it. love the look. Those are gorgeous sound foams on your wall.

Another great presentation. Thank you :)

I'm just like you, visualizing helps me a lot, I already understood the groundwork for this video, and I really appreciated the decent attempt at showing us what a rotating core within magnetic fields would physically look like, if you could see the magnetic forces acting on it to push it from one side at a time, very quickly. Loosely said, its like you're trying to spin a top thats held in place, but allowed to freely spin, you can only strike it from three specific points on the top's sides', in this example, your job would be to figure out how to spin the top with the least energy required to break inertia, while increasing its RPM, or holding it steady under load. Great video, thank you for helping us see something we usually would only be able to think about, read about.

7:44 is my 2nd favorite clip of Mehdi now! Right after the Right Hand Rule Dance

absolutely love your videos

6:57 this is a great illustration

Instead of that magnetic film (looks far too slow to react) use an old CRT monitor or TV, I think that should give the effect you're looking for. The only hard part is finding one...

Amazing episode and visualization!

The excellence of that end sequence can not be overstated. I rank it as a solid three walk shorts with bonus 6 sox

between the crossover with the old motor, the LED magnetic field, and the dance of equilibrum, this vid hits different, keep doing this mehdi

PLEASE keep going with this visualization. The magnet paper would be so awesome to see. Can you just slow down the frequency to like 1hz? Also, if you can show the lag, that would be incredible. Perhaps instead of the paper you could put a sheet the field can penetrate with a punch of metal shavings on top?

Love that video keep it up man💯❤

Thanks for an admirable combination of theory, physicality and humour.

I really like this piece of sheet.

Finally, feels like I've been waiting forever!!!

3 Phase Mehdi is hilarious. You should do stuff like that more often.

Man I love your videos. Your make this stuff funny and interesting,

Circuit Specialists: Employee A: Our customers are going to love these new ultra light power supplies! They're only a couple hundred grams! Employee B: we have to ship some to Mehdi Employee A: oh... I'll add 5kg of over current protection

5:40 ,“when this baby hits 88 mph you're gonna see some serious shit.”

I really learnt something new, thanks electroboom!

So much knowledge!!! U r great!!!

It's hypnotic!

We have an automatic transfer switch at work that has a bank of 6 LEDs on the side, basically showing the same thing (except the extra LEDs are for the negative voltages). I used my phone to capture this in slow-motion once and you can definitely see the rotation. I think the idea of having the indicators is as a quick way to see if one of the phases is gone or misbehaving.

Your rotating field animation will forever be stuck in my mind

7:46 okay, that animation is pretty damn sick

You said it yourself. This piece of SHEET doesn't work. Nice demo though :-)

Its been 3 years mehdi made his videos so informative and interesting that i learned so much from him (I edited this bcz some people dont want this line Love from india )

Really thanks for the video... Finally able to see this legendary thing

FYI I was perfectly happy with the psychodelic kettle drum visualization. And it was apparent that you really put yourself into it.

That animation does such an amazing job explaining this while being one of the most legendary things I've seen. Wow.

Have you tried running it at a much lower frequency like 1Hz so you can at least see the magnetic poles getting stronger and weaker as the voltage level changes?

Hey Mr. Electro! I am interested in getting my first adjustable DC power supply as your channel has been a huge inspiration to explore further into electrical engineering/DIY. Any recommendations for a good first unit? It seems there are a lot of options online and Im finding it hard to narrow down. Input from anyone welcome!

00:12 with the bangra too 🤣 Absolutely genius man

0:52 Safety man

I have 2 suggestions to (maybe) make your original visualization work with the magnetic viewer film. The main issue is that fields running in either direction (north or south poles) look the same on the film. To address that, I was thinking that you could make them look different by changing the strength/magnitude depending on the field direction. The first suggestion isn't changing the circuit at all, just adding a constant field in addition to the dynamic field by the motors (putting a stationary uniform magnet near the film). When the dynamic field aligns with the constant field, they constructively make a darker region on the film. When they oppose, the region is lighter. This would still be, at best, a very greyscale animation; and I'm not sure how contrasted the regions would be. Worth a try? An alternative approach would be to actually modify the circuit to achieve the same effect. Adding a diode on each coil (e.g. zener, or Schottky + resistor in parallel) would make it so each coil produces a stronger field in one direction than the other. This should be able to be seen on the film, and thus visualize the changing magnetic fields. I suppose either of these approaches look the same as a field changing strength (and not direction), but whatever.. constant values on graphs are silly. :P

I bet that his fingers are paramagnetic from all the zaps he got in his life and those are the shadows we see in the "peez of git" Mehdi is showing at 1:20. His blocking the magnet's magnetic field with his bare fingers! That's awesome! THANKS MEHDI! SEEING IS BELIEVING, REALLY!

keep doing stuff related to 3 phase and magnetics thankyou 👍

I love how EB acts like he doesn't know anything but in reality he knows exactly what he's doing.

I'd have loved to see the LED demo with blue and red LEDs in anti-parallel (with seperate resistors for each). We could have seen the north and south as the seperate colours.

Whenever this dude says “ooo I have an idea” my heart skips a beat

Best teacher!🎉

Formooolas 7:23

This is me, Always: " Sees an ElectroBOOM upload, clicks on the video and before even watching the video, clicks the like button " ✌🏽💯 Always great content Mehdi ✌🏽

A huge shutout from Angola/Africa. Love your videos!

The way he emphasizes "piece of SHEET" gets me every time.

2:45 Every gamer knows the human eye can only see up to 30Hz

Great teacher, ty.

7:44 should be your new outro I love it so much

I love your definition on the deference between brushless and brushed! 😂

Medhi! You should turn that sweet mesmerizing video at the end into an nfts for a fundraiser.

That animation is so rad!

I like the way you use your piece of sheet :D

Laughed way too hard at 07:25 You're a genius Mehdi !!

I really loved watching this sheet

Great content

Most excellent outro. I would loop this as a screen saver. :D

This is the channel that worth watching for❤️