TSPROF Kadet Pro is so amazing I was able to sharpen even when I had temporary use of only one hand

Рет қаралды 1,934

Alexandria Knife Sharpening & Laser Engraving

Күн бұрын

There are many factors in being able to sharpen something to a perfect razor sharp edge. The TSPROF Kadet Pro has such amazing precision and ease of use I was able to sharpen even when I was restricted to the use of one hand from a recent surgery. Often I get asked by people disabled vets who see my videos and want to start a sharpening service if I could recommend a sharpener to them to start with this is never easy to do as a lot of my gear in the shop requires two hands, or the ability to stand, but I think this sharpener will work for a great many people who have limitations and want to pursue sharpening as well as everyone else who just wants one of the very best sharpeners on the market. #knifesharpening #tsprof
tsprof.us/?ref=yrvtkzy6
Get an additional discount if you use my code ALXSHARPEN5 at check out.
I know this video is long so here is a timeline if you need to jump around & please like and share and join the channel if you like the content.
5:40 Start of the review
6:17 Folding Feature and lock
7:33 How to install the Rotating Mechanism
8:15 Angle Adjustment Knob
8:30 How to turn on Axicube and set Mode
9:28 Re- Profiling Stones
10:10 Why low grit stones are your best friend
12:37 Mounting Knife and TSPROF Stubby
13:30 Mounting Knife one handed
14:20 Built in angle settings
16:15 Putting on an abrasive with one hand
17:28 Setting Axicube one up for use on the Kadet Pro
18:25 Testing Accuracy
20:49 How I hit my angle spot on
31:46 Stropping
33:50 Cut test one handed
34:50 Some discussion and comparison to the Pioneer
Below is a link to the gear I use and recommend in my shop all in one place minus a few things. If you are new please like and subscribe videos that have helped you it really helps us keep growing and please watch the channel trailer it has lots of info and answers that I get asked every day and helps you find what items your looking for.
The Gear Link- www.alexandriaknifesharpening...
Channel Trailer • Welcome to Alexandria ...
MY NEW AMAZON PAGE THIS IS A WORK IN PROGRESS - I PLAN TO DO SOME LIVE STREAMING ON IT SOON!!! PLEASE CHECK IT OUT AND JOIN AND LET ME KNOW YOUR THOUGHT- This will be a much more condensed version of what you get on my KZfaq Channel- www.amazon.com/shop/alexandri...
(If you use one of the affiliate links above or on my website I may receive a small commission it doesn't increase your cost and helps me make more videos and do product test and produce more content.)Thank you for using them! If you decide to purchase something it's a great way to show support for my channel. I do purchase all the items in my videos myself. I am not sponsored by any products , or companies so all my reviews are truly my own opinion of the products you see me using in my business)

Пікірлер: 17

@DoingMoreKustoms 3 ай бұрын

Very well done, thanks for showing us how to use. Take care.

@ALXSHARPEN 3 ай бұрын

Thank you hopefully it helps

@davestelling 2 ай бұрын

I have multiple disabilities, (Including only one eye.) and I own the TSPROF KO-3, and I'm able to work it. I've only done a few blades so far, including my EDC "Delica," which I went all the way with finishing it with the 0.3 micron diamond lapping film. I'm even impressed every time I open it to use it! Amazing machine, pricey yes - but we all know we get what we pay for these days. Your a good man, Paul. Thanks for the great content...

@ALXSHARPEN 2 ай бұрын

Lapping film too that’s some dedication. I have a bunch of it in the shop but must admit in the last 5 years I’ve used it maybe 2 times. I don’t do much mirror finish work I actually try and avoid it. But I commend you sir for your patience and persistence. I am hopeful TSPROF will eventually send me a KO3 to review

@davestelling 2 ай бұрын

@@ALXSHARPEN Afternoon, Paul... Thanks for your reply. Yes - I wanted mostly to see if I could actually achieve the "Mirror" edge so many enthusiasts seem to prize. I wouldn't necessarily keep doing it on my EDC, I think it's unnecessary...a bit of a ragged edge is good enough for me, and what I mostly use my Delica for. I hope TSPROF will indeed send you their KO-3, they'd be doing themselves a big service having you review it. I very nearly went with the Kadet Pro, but decided the KO-3 was more versatile. Also, I've been a big fan of, and a long-time subscriber to Capt. Matt @ The American Edge here on KZfaq. Hope your thumb is healing nicely...

@davestelling 2 ай бұрын

P.S. The "Atoma 140" grit stone seems to be the most popular re-profiling stone for the TSPROF and other sharpening systems, it's very frequently out-of-stock at most of the major sharpening suppliers...

@hbarncraftworks3447 3 ай бұрын

I have MS and decided to start a sharpening business. The Kadet Pro is my favorite sharpener. Thanks for the review.

@ALXSHARPEN 3 ай бұрын

That's great how is your business doing and is the KP your primary sharpener?

@hbarncraftworks3447 3 ай бұрын

@@ALXSHARPEN I have business trickle in, but I really haven't advertised yet. I need to get a dropbox built first. Since I'm not real busy with the business, I primarily use the Kadet Pro as I really like the system.

@jbholton 3 ай бұрын

Great video Paul! Nice to show the versatility of the Cadet. This is a very sturdy unit and does not move around like some of the others. I too have cut myself when navigating around it, so watch your hands placement. I also use kapton tape on the clamps to avoid potential scratching.

@ALXSHARPEN 3 ай бұрын

I have been meaning to look and see if anyone makes protective sleeves for them. Someone told me about a coating for tools they dipped theirs in.. it’s for putting rubber coating back on tools but I forgot the name that sounds like an interesting potential solution also