How to install an Adjustable Elite-1 Fender Eliminator on a 2017+ Yamaha R6 by TST Industries

No video

How to install an Adjustable Elite-1 Fender Eliminator on a 2017+ Yamaha R6 by TST Industries

Рет қаралды 18,481

Күн бұрын

The best adjustable fender eliminator for the 2017 Yamaha YZF R6 from TST Industries. Enables multiple mounting locations and license plate angles. For more info please see: tstindustries....
Make sure to subscribe here: bit.ly/1jq2ZrN
Follow us on Facebook here: on. 1nuTjlF
TST Industries has created a modular fender eliminator that can be mounted in place of the OEM fender or deep on the undertail. The system features a closeout to fill the void left by fender removal, angle adjustment for the license plate mount, and an optional bracket to enable re-mounting of the OEM rear signals. All the parts are made of CNC machined aluminum, then anodized for a great looking and durable finish. The shape of the closeout is sculpt machined to match the exotic lines of the R1. This setup is hands down the most advanced and exciting fender eliminator system available for the new R6.

Пікірлер: 33

@TheCuyunchristian 6 жыл бұрын

Can this flip the plate as well?

@brianperez18ssjuchiha12 4 жыл бұрын

So if i do the low mount with the license plate light where do I install the light on top of the plate with the glue or under the plate so the light comes from the bottom

@TSTindustries 4 жыл бұрын

I typically install at the top of the license plate pointing down. I do not use glue or even the tape that comes pre-applied on our liicense plate lights. I just use the clamping force between the license plate and fender eliminator bracket. Then the wire has to be routed to the inside of the bike. On the R6 I drill a small hole in the subtray to route the wire in.

@Vsmoovee Жыл бұрын

what is the product code for the oem dog bone stamp washer part? i lost mine

@TSTindustries Жыл бұрын

You can find that on fiche at mrcycles.Com ot partzilla. But if you want to get it done cheaper and quicker use two washers of approproate thickness

@ChrisGodly 5 жыл бұрын

Can you tell me all the tools I need for this install!

@TSTindustries 5 жыл бұрын

see time stamp 0:26 in the video

@omaralarcon6103 2 жыл бұрын

Where do you mount the “BL6” turn signals with the low mount position?

@TSTindustries 2 жыл бұрын

We typically do not mount the BL6 signals with the low mount.

@Smurfk20z1 6 жыл бұрын

I have the same bike it was clean as fuck till my little brother decided to go in the garage and get on it dropped it broke my peg scratched my faring scratched my tail .... i wanted to slap him lol

@TSTindustries 6 жыл бұрын

Yikes! That sounds like an unpleasant surprise to hear about.

@fitmastervic4802 2 жыл бұрын

Does this come with the intergrated tail lights

@TSTindustries 2 жыл бұрын

We do not sell an Integrated Tail Light for this model.

@elevatedboost7444 5 жыл бұрын

I would like to use the low mount how can I use a plate light with this ?

@TSTindustries 5 жыл бұрын

With the hinge bosses mounted to the bottom of the undertail the center-forward push fastener becomes redundant. If you remove it you can have a nice routing hole to get your wire in from the license plate light. If that is too much length of visible wire for you then you can drill a 3/16" hole through the undertail closer to the FE setup and route through there. As far as positioning of the light and making the connection you can look through the installation for the license plate light and it will answer all your questions.

@brianperez18ssjuchiha12 4 жыл бұрын

Can you do a license plate light on the low mount

@TSTindustries 4 жыл бұрын

Absolutely!

@dontegray8529 7 жыл бұрын

Will there be a plug and play integrated tail light for this bike?

@TSTindustries 7 жыл бұрын

We have considered the following! The best thing we could say, stay tuned.

@12bravo51 4 жыл бұрын

Will this install work for 2020 R1 also ????

@TSTindustries 4 жыл бұрын

No, this is for an R6. Our 2015+ R1 fender eliminator is what you should be looking at. Very similar setup and just as elegant but actually made for your bike. We have the same videos available for that model and you can find the parts and photos at TSTindustries.com

@donrvb6425 6 жыл бұрын

How to make an order of this product? What is your address? Thanks

@TSTindustries 6 жыл бұрын

tstindustries.com/TST-Elite-1-Fender-Eliminator-for-Yamaha-YZF-R6-2017-.html

@a1_digest501 6 жыл бұрын

Why no adjustable one for the Zx6r!!!!!!😢

@TSTindustries 6 жыл бұрын

The closeout that we made for the ZX6R was designed before we designed the Elite-1 Adjustable setup. The closeout mounts to the bike with blind screw holes so there aren't thru holes in it, therefore we cannot mount the hinges to the setup. We thought about the redesign but with as much work as we have with moving-forward design, working backwards isn't smart.

@AGNDJGaming 6 жыл бұрын

Does this also fit the 15+ R1?

@TSTindustries 6 жыл бұрын

No, this video and product are designed specifically for the 2017+ Yamaha R6. However, the product we offer for the R1 can be found at the link below. kzfaq.info/get/bejne/lbJyppSBvZnJYqs.html

@AGNDJGaming 6 жыл бұрын

TSTindustries thanks guys

@hataaurider 7 жыл бұрын

Nice..

@nathanking2322 6 жыл бұрын

Do you guys ship to the UK?

@TSTindustries 6 жыл бұрын

Absolutely.

@nathanking2322 6 жыл бұрын

Awesome, I’d be looking to fit the standard OEM signals back. Slithered concerned our horrendously oversized licence plates may be to wide for the bracket, resulting in the plate covering the turn signals. It measures 9”x7” ! Should I purchase a kit, would it be possible to return the item if no good back to the USA for a refund?

@TSTindustries 6 жыл бұрын

You can return unused products for a refund but the cost of shipping it back will be steep. Why don't we figure out if the setup will work for you before you purchase it. If you contact our support guys through our website, and send them your plate dimensions, hole dimensions, spacing, offset, then we will be able to verify this for you.