Рет қаралды 23,984
1. Any tube diameter from 16 mm to 50 mm can be sealed and trimmed in this model.
2. Tube diameter changes but holder outside diameter same. This helps in holding any sized tubes in location without changing centre.
3. Easy adjustment of sealing station height according to different tube heights by rotation hand wheels.
4. Any tube heights from 60 mm to 230mm can be sealed and trimmed.
5. 1 pair of different tube holders supplied with the machine.
6. All types of tubes can be sealed whether it is plastic or Laminated/ LD/Monolayer/Multi Layer etc which have plastic inner lining.
7. Adjustable digital temperature controller to select different temperatures for different materials of tubes.
8. In-House Manufactured Stainless steel Hot Air Gun with high efficiency.
9. Adjustable heating time and sealing time for different tubes.
10. Solenoid operated trimming and batch coding station and can be operated by push button.
11. Separate air pressure regulator for the machine to maintain air pressure steady.
12. Flow control valve to maintain hot air flow to the tube ends.
13. Compact and economy model requires small area to occupy.
14. 2 complete sets of batch codes- Numerical letter- 0-9 supplied with the machine.
15. Hard chrome plated Sealing teeth with specially designed batch code holder.
TECHNICAL SPECIFICATIONS:
• Overall size: 550mmL X 550mmW X 1400mm H
• Packing size: 2Ft Length X 2 Ft Width X 5 Ft Height.
• Total Weight: Approx: 85Kgs.
• Gross weight including packing: 120 Kgs.
• Power supply required: 220VAC,50HZ,4.5KW
• Heater power: 3500Watts(3.5Kw)
• Electricity Required: 4.5KwH, 220VAC, Single Phase, 50 Hz, Or as per customer requirement.
• Air pressure required: 5.5 Kg/cm2 ( 4 cfm- 2 HP Air Compressor)
• Complete Stainless Steel Hot air assembly.
• Sealing type: Hot air assisted Pneumatically operated sealing jaws.
• Output: 10 tubes/minute.
• Tube sizes: Diameter16 mm to 50 mm
• Tube length: 60mm to 220mm.
• Sealing Width: 5mm to15mm as per customer specification.
• Trimming: Standard straight line trimming, or as per customer specifications possible
• Tube placing: Manual.
• Machine model: PSCT15
• Number of Batch codes inserted in sealing teeth: 10 Nos.
• Both Side Batch coding possible on request.
• Batch code size: 2mm W X 4mm H X 12.55mm Length
• Machine type: Semi-automatic tube sealing, coding, and trimming machine, Standard MODEL with stainless steel frame fabricated and finished to Mat, and all other non-contact parts are made in carbon steel finished and chrome plated quality..
• Air Pressure required: 5.5 kg/cm2 @ 4 cfm(2Hp Twin Cylinder Single/Three Phase)
• All moving parts, machine frame covered by SS sheet metal of good gauge and finish.
• Panel box inbuilt carrying timers, Temperature controllers and operating switches.