TUNE Up Creality Ender 3 S1 3D Printer (and others!). Fix Bad Layer Lines, Ringing, Z Wobble, Etc

Рет қаралды 66,011

Жыл бұрын

I took one for the team, and suffered through working with a Creality S1 Printer, that had the bad layer lines problem. I worked through countless potential causes, to come up with a laundry list of items, for you to check, in order to solve the problem, and get back to Quality prints! This applies to many other 3D Printer Models as well! I'm @GreggAdventure, take a seat next to your printer, press the play button, and let's do this...
Sandisk 32gb High Endurance MicroSDHC: amzn.to/3XFwQHG
TEST MODEL: 1drv.ms/u/s!AsUNEpEglKSchshUt...
Pro Firmware: github.com/mriscoc/Ender3V2S1
Official S1 Manual: 1drv.ms/b/s!AsUNEpEglKSchshm8...
Help this Channel continue to exist: Use my Links:
Amazon: amzn.to/2miGQq9
Creality: shrsl.com/424l2
Bambu Lab: shrsl.com/46lky
Anycubic: shrsl.com/4gssz
Sovol: sovol3d.com?sca_ref=2756755.r8WNQiJdNf
Sunlu: www.sunlu.com?sca_ref=4022320.F0sV6y4ht9
Send a TIP: Click the "💗THANKS" button, or Venmo.com/gregg-cerenzio
Become a Member, by clicking "JOIN", or this link:
/ @3drundown
Learn with me!
My 3D Printing Udemy Course:
3DRUNDOWN.COM
CURARUNDOWN.COM
BAMBURUNDOWN.COM
Support me via Patreon: patreon.com/3drundown
Model by the Wonderful Mr. 3D PRINTY: www.thingiverse.com/thing:573...
Upgrade your Printer:
Capricorn Boden Tube: amzn.to/3wOAT8X
Creality Official Metal Extruder: amzn.to/3JBeguj
Nozzle Cleaning Kit: amzn.to/3JsK307
Razor Tool, for easy Stubborn Print Removal: amzn.to/3pQ7Jnr
Get The Smart Kit Here: amzn.to/328eBDr
Get a CR-TOUCH Here: amzn.to/3oWhrnK
My "Must Haves" Amazon 3D Printer List: a.co/5RxTkYl
Find me on Facebook: / greggadventure
Find me on Instagram: / greggadventure
Find me on Etsy: www.gaetsy.com
#3dprinting #ender3s1 #creality

Пікірлер: 272

@zac2877 4 ай бұрын

this is one of the best 'comprehensive' videos for ender 3 s1 on all the different tips in Tuning. appreciate much

@ehltechwiz1775 Жыл бұрын

When I did my initial setup, I didn’t do half these things. After 3 months of printing and getting pretty good prints but uneven layers I did all of this and the quality is like night and day. Thanks for the brief but precise explanation and getting my prints to a higher level.

@curtissdoyle8959 Жыл бұрын

Finally a word on how firm the roller wheels should be! Thank you 🙏

@Feibie Жыл бұрын

You legit explain the tuning very well and very clearly, thanks man, I done it wrong watching other tutorials.

@3DRundown Жыл бұрын

Thanks so much! Doing my best... 🤜🏼🤛🏼

@andrewmoore7601 8 ай бұрын

Thank you so much for this video! I went from 8/10 prints completely failing and needing to constantly watch my printer to just being able to press “start” and walking away. I’m new to 3D printing so a lot of resources online went completely over my head, but your video is very clear and concise.

@duquedeturing8211 9 ай бұрын

Thank you! Gaps between all my lines were driving me nuts, I tried tweaking: temp, z-offset, speed, leveling, retest, etc, and after seeing this video I checked the tension of the two belts and increased it (in both) and...that was it! Almost perfect first layer!

@markbutler7205 Жыл бұрын

great video, clear and easily understood and you actually showed changing them rather than just talking about it. thanks!

@SoggyBiscuits1000 Жыл бұрын

same here, easy to understand and good video shots of what you need to do

@mattbean8076 Жыл бұрын

I love your channel and content. Thank you for your informational, problem solving, and upgrade tutorial videos for Ender and Bambu printers. I think my favorite thing is that you are not doing the overly-enthusiastic performative personality and presentation. You always seem mildly annoyed by existence itself, and I appreciate that. You're authentic, and I am more likely to trust your opinions when you both like or dislike something.

@3DRundown Жыл бұрын

Thanks so much. I am NOT a fan of KZfaqr Nonsense... The fake reviews, the "KZfaq Face" thumbnails, the fake excitement of a 9 year old on Christmas, the 42 second animate heavy metal intro. Drives me nuts. I make chill video content for Adults, and people that don't want to get a headache, while trying to learn something. VERY nice to see somebody mention that. Happy to have you. Consider supporting my Course, my Patreon, or a SUPER THANKS, to help keep me around. :)

@matteopascale483 Жыл бұрын

I want to thank you so much i resolved all my problems with the printer thanks to your video. I love your format and clear explanation I can see that you are a really hard worker. You are so underrated and you got a new subscriber😊 keep on going you deserve so much more!

@3DRundown Жыл бұрын

wow, this means allot. Thanks so much! These videos are incredibly time consuming. Messages like this make my day! #SuperThanks

@ferdinandoportel 9 ай бұрын

I'm glad I found this obscure channel. Thanks to you, I managed to fix the problem I had with my S1 Plus every time I activate retraction on Cura. I never thought that that little nut regulated the clamping tension of the extruder spring. thanks

@3DRundown 9 ай бұрын

Hey now.... 😆😆 Good to hear you up and running. I lean on my S1+ ALLOT.

@AaronNW 23 күн бұрын

Amazing video. I've been Printing and modifying my Ender 3 Pro for about 4 months now. I just got this printer refurbished and you gave me some good extra details I was not paying attention to before.

@hatcherluke Жыл бұрын

Incredible video. After a few months of great prints I noticed my S1 was producing bulging layers and I was having confusing issues with first layer/leveling. In my case all of the axis were properly tuned but the Sprite itself had come loose from the mount (all of the screws around the tensioner were extremely lose) and was wobbling freely! Very simple fix and now it’s back to perfect printing.

@3DRundown Жыл бұрын

Epic! Thanks so much. Happy to get you going! #SuperThanks

@jasonlima9264 Ай бұрын

Thank you for the video man. I owned my s1 for almost a year and didn’t do 90 percent of the tuning till now.

@RobertoGardenier 8 ай бұрын

I have done absolutely nothing that you mentioned, yet! I will check everything on my printer thanks to your detailed and clear instructions. I absolutely am a fan of your video and your insights. Thank you for taking the time to make these videos and share it with us mortals. Much appreciated!

@3DRundown 8 ай бұрын

Very welcome. Thanks for being here. Get it done!

@LonghornTexasFan Жыл бұрын

I'm brand new to 3D printing. I bought a refurbished ender 3 S1 Pro. I thought I received a bad unit but thanks to your video I fixed the issues it had. Thank you soooo much.

@3DRundown Жыл бұрын

Epic. Love this. Happy to help! You may like my full course

@vonpoop1102 Жыл бұрын

Thank you. Clear, crisp, concise. Solid, followable style. I wasn't having issues, but you certainly directed me to some wobbly fasteners I'd never paid attention to.

@3DRundown Жыл бұрын

Thanks so much. That was the goal! Happy to help. One day it's not an issue, the next day she prints like sh*t! Good to get ahead of it.

@vonpoop1102 Жыл бұрын

@@3DRundown For the autodidact (as I imagine many of us are), it's so hard to gradually learn actual mechanical setup and overcome that innate hesitance to touch anything. Always wondered why so many spanners were included. 😬 Certainly underlines that Creality really should be producing proper manuals for their machines. Sigh. Cheers again, anyway.

@3DRundown Жыл бұрын

Touch everything. Break everything. Fix everything! Thats how you get from lost, to found, with this kinda stuff. :) Very pleased to be able to help you get into things. :)

@moto61texas74 24 күн бұрын

Great Video. You go at a pace that is really easy to follow as well as providing great information. I struggled with my new printer for a few days before finding this video. My printer is now tuned up about as well as I can get it. Keep turning out the good videos!

@3DRundown 24 күн бұрын

Thanks so much. My pace is 100% Deliberate. I'm blabber a mile a minute in real life. 😂😂 Welcome to the party!

@TerryLondon Жыл бұрын

Thanks for super good tutorial! Clear and explanatory. Saves a lot of time for people who are trying to figure out why their printer prints crap :D I fixed all of those issues mentioned in this video.

@mkabakian 9 ай бұрын

Hands down the best video I've seen on the S1. This is the S1 Troubleshooting Bible!!

@3DRundown 9 ай бұрын

Thanks so much. This machine put me through the ringer!! Lol

@NateGreySummers Жыл бұрын

Thanks a lot, so much clearer than Creality aftersales vids. Thanks to your video, I've noticed one of my z axis wheels was turning loose and I've been able to fix that. I've also greased a little the z endless screw with unilube. I don't know if it'll be perfect (print is still in progress) but it seems to be better than before. You have a new subscriber :)

@mrmister9969 10 ай бұрын

This is it. This is the video. Very well explained helped a lot and the prints improved massively. On the topic of the print speeds tho: isnt the speed setting almost irrelevant as long as the acceleration is low enough. Because inaccuracy are usually caused by massive accelearations. And for small parts or pints speeds in the tripple digits wont actually be achieved if you keep the acceleration reasonable. But for larger parts the printer can save some time on long straight lines without sacrificing quality. Obviously you need to have the flow to match the print speed

@brandon270 9 ай бұрын

Thank you! Just checked everything you went over aside from the slicer settings and my prints are already night and day ! Going to try your recommended slicer settings after this test print. I was most defiantly a victim of extruder wobble lol

@patrickbodine1300 Жыл бұрын

One thing that I did was to replace the bed springs with those silicone spacers. Doing that actually stabilizes the print surface.

@3DRundown Жыл бұрын

Some people like those, but I prefer the springs, and teaching the springs just makes sense since 99% of users have them. But, do roll with what is working for you. 👍🏼👍🏼

@azimuth9819 Жыл бұрын

I use the blue heavy duty springs, best of both worlds

@hollisbabybeats 7 ай бұрын

I tried that then went back to springs. Silicone spacers were not consistent for me. Plus they shrank

@brendoncarroll6904 Жыл бұрын

Great easy-to-follow tutorial. Thank you so much.

@lucasmaximilianokramer6161 7 ай бұрын

your videos helped me a lot since this 10 months after I started this hobby and I bought the s1 because it was the best choise at the moment in our market in Argentina, then I bought another one, now I have 2 and I needed your videos for practicly every single problem, even for the glass bed. So thank you very much. It would be nice if you can post the video for the e-steps explanation, I'm using klipper right now. Cheers!

@hitash32 Жыл бұрын

this resolved the issues i was having with inconsistent z axis. very much appreciated.

@3DRundown Жыл бұрын

Epic. For future visitors: What was the Issue, and the specific fix for you?

@hitash32 Жыл бұрын

@@3DRundown the issue i was having was that my z offset would change every time i used auto home, as well as the more typical ringing issue. i actually had two causes, the z rod on one of my stepper motors was not properly secured, and the gantry that travels up and down was no longer straight (one of the wheels was barley making contact)

@edmundbrunning7387 4 ай бұрын

Grab it and abuse it . Your a rock star as far as I'm concerned. Thank you for all your advice and experience that you share with everyone. If your ever in NYC dinner is on me . Sincerely Edmund B . Thank you.

@3DRundown 4 ай бұрын

I'm in NJ, born in Brooklyn. I'll take you up on that Dinner sometime. Very welcome! 🔥

@edmundbrunning7387 4 ай бұрын

@@3DRundown The garden state. I'm a man of my word I'm in the Bronx but I used to work in Brooklyn and I'm from Manhattan born and raised so with that said you let me know what type of cuisine you like or a restaurant you prefer and you got it . Thank you again . Sincerely Edmund Brunning

@million1094 Жыл бұрын

You are a Superstar. I purchased an Ender 3 S1 Plus last November and followed your well easy to follow guide very professional and non patronising like some video's, my prints have been ok, as a new venture into 3D Printing. But I have just seen this video ok its for a S1 Pro but it seems to be generic. Thank you so much almost everything you raised was loose, but without viewing your great video I wouldn't have known. Thank you Once again. Kind regards Steve UK

@3DRundown Жыл бұрын

Pro Tip: The S1 PRO and S1 PLUS, use the same screen and firmware. ALL the S1 builds are virtually identicle. Only the PLUS is bigger. So, do learn up on all the S1 models, and it will help you out! As for not Patronising..... I'm just one of you guys! Happy to have you. 🤛🏼🤜🏼 #SuperThanks

@million1094 Жыл бұрын

@@3DRundown your a true gentleman. Thank you 🙏

@brianfield4170 Жыл бұрын

Just wanted to drop a "thank you"! I was having issues with my new Ender 3 S1, and was starting to get frustrated. My extruder tensioner was quite loose, and extruder assembly was loose, the brass pieces on the back were lose, and I tightened up the belts of bed a little more. After doing all that and slowing the print speed just as you suggested, its a game changer. I was having significant issues getting the first layer down without being either too smushed, not smushed enough, lack of adhesion to the bed, etc. All of those issues are now gone and my prints are coming out "perfect" (in comparison to how they were before). There's always more tuning that can be done, but at least now I'm off to the races.

@3DRundown Жыл бұрын

You're very welcome. It does kinda never end with these things, but that's just part of the the game. You'll get used to it, and you'll get better at it, till it becomes less of a headache, and more of a routine. Stick around, and we'll suffer together. #SuperThanks

@tempacc9589 9 күн бұрын

Wish I found this far earlier. Best starting place for anyone trying to fix problems. One more recommendation: My Z axis were not at equal height. The bar always looked a bit diagonal. I manually turned on the side that was lower on the coupler that is attached to the screw base and it slipped over two belt positions until it was aligned with the motor on the other side. Now it is straight

@Photosyntech Жыл бұрын

THANK YOU, THANK YOU, THANK YOU. I really needed this video!

@PeachesandCream225 Жыл бұрын

Seriously useful video for beginners like me. Subscribed!

@justinluttmer Жыл бұрын

Thank you. This is just what I needed and saves me the frustration of scouring KZfaq for each and every thing I need to check on my S1.

@3DRundown Жыл бұрын

Awesome. These comments sure help it feel worth the time that went into this! Happy to help. Update me on anything specic that was happeneing, and what fixed it! Will be great for future visitors.

@justinluttmer Жыл бұрын

@@3DRundown I had issues with the rollers not being equally snug when adjusting the eccentric nuts on the Z. I wasn't ware you could loosen the nut you pointed out at 7:50 (kzfaq.info/get/bejne/prZjadKr18y2gWQ.html&si=EnSIkaIECMiOmarE&t=469).

@user-od6df1kb2y 7 ай бұрын

you are the goat!!!!! thank you so much iv been struggling with this printer for over a year. It has caused me great dissapointment. THANK YOU!!!!

@3DRundown 7 ай бұрын

Love it. Very welcome. Thanks for being here. Now go make fun stuff!!

@3DRundown 7 ай бұрын

Have I helped you? Help ME continue this channel with some support: TIP: Click the "💗THANKS" button Become a KZfaq Member, by clicking "JOIN" Support my Patreon: patreon.com/3drundown Use my Affiliate Links when Shopping: Amazon Link: amzn.to/2miGQq9 Creality: shrsl.com/424l2 Bambu Lab: shrsl.com/46lky Support me via my Course: 3DRUNDOWN.COM

@howlandneal 3 ай бұрын

Your video has been tremendously helpful, your channel is underrated! I'm embarrased to say how long I've been running my refurbished Ender 3 S1 Pro without touching any of those loose eccentric nuts. Thank you!

@3DRundown 3 ай бұрын

Very welcome! And you're not the 1st one to do this...

@Paulilmys Ай бұрын

You are a life saver for me today.

@SoggyBiscuits1000 Жыл бұрын

i just got a hardly used ender 3 s1 and have been trying to set it up, its not my first printer but it is my first with a heated bed, dual z`s and self leveling. my layer height seems ok but iv been having issues with my Z lines, printed 8 rabbits and making slight adjustments each time and still no good. just watched this video and found out i didnt check the 4 screws on the Z rods, they were very loose. just strating a new print so i will find out in 30 mins to see if this has helped lol!!! great videos, very detailed and to the point. keep up the good work!!!

@shutupandlisten9588 Жыл бұрын

You are the best. I was able to get a lot of my problems solved. Thanks for your video

@3DRundown Жыл бұрын

Thanks so much. This one took allot of work. Stay tuned for one more thing to check, tmrw!

@jhyland87 7 ай бұрын

This was very helpful. Thank you! Earned a new subscriber

@3DRundown 7 ай бұрын

Welcome friend

@arnolouw 9 ай бұрын

Liked and Subscribed! this was a super easy video to follow and was able to do the same adjustments on my s1 plus. Did not even know about halve of these!

@3DRundown 9 ай бұрын

🔥🔥🔥 Got u

@connormaughan3425 Жыл бұрын

Excellent video!

@BKnight7z 5 ай бұрын

Bro ngl you’re really the goat. Keep grinding and making vids you genuinely make a difference in the world. Appreciate the help

@3DRundown 5 ай бұрын

Thanks so much. This channel is ALLOT of work. I struggle to handle it all. Promise to keep the Grind and do my best! Welcome to the party

@BKnight7z 5 ай бұрын

@@3DRundown I know running any small channel is ALOT of work. I just wanted to make sure you knew your hard work helped someone out a lot today. Have a great 2024 man!!

@3DRundown 5 ай бұрын

Friend, knowing that, and being told that.... is the one thing, that keeps me going, on those days where I feel I just don't have it. I appreciate you more than you know.

@3DRundown 5 ай бұрын

@sniperrn3062 Жыл бұрын

Thanks! Great Information, and thorough explanation in the video.

@3DRundown Жыл бұрын

I can't tell you how much "Super Thanks" helps and is appreciated. 🙌🏼🙌🏼🤜🏼🤛🏼🙏🏼🙏🏼

@SwapPartLLC Жыл бұрын

Bed warp is another major issue with these printers. Mine is really bad, but I was able to get it close to flat with foil tape. I've always had a ringing problem. Being my first 3D printer, I just thought it was normal and sanding them out was just part of the process. I'll be going over everything you mentioned now.

@3DRundown Жыл бұрын

ALLOT of people think their bed is warped, but, in reality, it isn't. Check out my leveling and ABL video as well. Layer lines will tend to exist in some form, but, should be minor. I think you'll find improvement if you run down this video. Good luck!

@thiagoamaral5912 4 ай бұрын

Excellent video. Thanks very much.

@alberthlimalucena7901 4 ай бұрын

I found a couple of these problems on my printer, just made the ajustments and I'm printing right now, thank you! I'll tell if it works!

@3DRundown 4 ай бұрын

@Sysshad 10 ай бұрын

I can add to 8:00 that something that is also overlooked is that one of the two z axis mig be higher or lower then the other, this will also make one of the two sidewheel have different amount of traction. I had to losen the belt at the top, then manually turn one of the z bars, just a little bit, and then it was in level. I did this by moving the printer head to the max, manually

@lkjhgfdsayxcvbnm Жыл бұрын

About the tensioner: I saw a video suggesting to look at the "bite marks" on the filament when you pull it out. They should not look like the filament is squished or nearly cut through, nor should they be too superficial. These marks give you a nice hint whether the extruder has enough grip. Here, you also should be able to see if the extruder gear is worn out in case lots of abrasives were printed

@3DRundown Жыл бұрын

Yup. Don't over-do it. Over tightening is super common. I have never worn out an extruder gear. Firm but not tight

@MeneerGaming Жыл бұрын

Really good video thanks

@mikefernandes3959 Жыл бұрын

Best instructions around

@JasonLihani Жыл бұрын

I just bought one of these so I'm definitely saving this video for later.

@3DRundown Жыл бұрын

Definitly come back and go through it with me. It will pay off.

@KenanYusufTemel 3 ай бұрын

I loved how you said you will mention all the important parts but only briefly but still gave the most detailed check-correct method of eccentric nuts hahaha.

@3DRundown 3 ай бұрын

I never know WTF I'm actually doing. I just wing it all 😂😂

@icepicker8528 Жыл бұрын

Lot of good info here. Thanks very much!

@3DRundown Жыл бұрын

Very welcome! :)

@176Cream33 8 ай бұрын

Crazy!!! this video Help a lot !

@user-mb2dc1bv1b 10 ай бұрын

This is a wonderful video, and after it I began to understand the mechanics of the printer a lot more and now I feel more confident) During the adjustment of the Z-axis rollers, for a long time I could not understand where the small backlash came from, I clamped and loosened those small crossbar screws and the eccentric several times until I realized that it was the backlash of the axis itself on the screw) Also, I additionally tightened the screws on the wheel axles, because they rest against the inside of the bearing and nothing bad will happen? Additionally, I want to add about checking the parallelism of Z beams. I had a discrepancy of 0.5 mm at the top and bottom of the beams. Loosening the window at the bottom of the printer did not help, the frame did not move in that place, and I just tightened the two bolts a little tighter next to each other, on the side. This was enough for my 0.5 mm, and there was even a margin for a stronger adjustment. And again about Z. Lifting the axle to the very top, I found that the train was stretched and did not allow it to reach the end. I moved it a little into the mount, and now the axle gets out. It is worth checking in advance before printing on the topmost point.

@IAMPOPP 4 ай бұрын

Great video. Now i jnow all the different parts and where all my adjustments are. Thabk you for this video.

@3DRundown 4 ай бұрын

@johnx9318 11 ай бұрын

Excellent video, thanks!

@3DRundown 11 ай бұрын

Welcome!

@diy_wizard 3 ай бұрын

thank you, I'm one of those who use 3d printing to create ideas, not to do 3d printing with the desire to tinker around with the printer. My Ender 3 S1 was printing worse and worse, i now have another one (i wanted to get a bambu with AMS either way), but now i watched you video and quickly managed to bring my ender 3 s1 back into the game, it was just some tensioning i never thouzght about before! Thank you very much for this short, straight to the point, easy to follow video. One thing I noticed: in your video it is not clear, which nut you tightened for the extruder, because your hand is in front of it every time you screw ^^ but its easy to find the information.

@3DRundown 3 ай бұрын

Some of these shots are really tough to get. I *try+ to avoid that, cause it would drive me nuts too!

@colekeller 4 ай бұрын

Thank you for this!

@3DRundown 4 ай бұрын

Very welcome. My S1 was a royal pain in the ass.

@workhardplayharder4924 Жыл бұрын

Thanks for your clearly video❤

@3DRundown Жыл бұрын

Very welcome!!

@eduardpopov4165 Жыл бұрын

Thanks, all detailed

@jamesharris9894 Жыл бұрын

thanks to your tips my ender 3 s1 running great just stopped by show support

@3DRundown Жыл бұрын

This made my day... Thank you brother. Honored to have you around

@estebankelly770 Жыл бұрын

thank very much, excellent explanation of everything !!!!!🤗

@3DRundown Жыл бұрын

🙌🏼🙌🏼 🤜🏼🤛🏼

@PrintedByJohn Жыл бұрын

This video was so helpful thank you.

@3DRundown Жыл бұрын

Your Welcome! #SuperThanks

@PrintedByJohn Жыл бұрын

@@3DRundown I just have one question where is your video to calibrate an ender 3 s1?

@kkram53 Жыл бұрын

Thank you for this video it helped so much

@3DRundown Жыл бұрын

Welcome! 💯💯💯

@3DRundown Жыл бұрын

Have I helped you? Help ME continue this channel with some support: Click the "💗THANKS" button, to Tip or Venmo.com/gregg-cerenzio Become a KZfaq Member, by clicking "JOIN" Use my Affiliate Links when Shopping: Amazon Link: amzn.to/2miGQq9 Creality: shrsl.com/424l2 Sunlu: sovol3d.com?sca_ref=2756755.r8WNQiJdNf Sovol: www.sunlu.com?sca_ref=4022320.F0sV6y4ht9 Support me via my Course: 3DRUNDOWN.COM

@miked8156 6 ай бұрын

This video has helped me resolve my issues with quality. Have you done a video on speeding up print times while retaining quality?

@3DRundown 6 ай бұрын

Thanks so much. Consider adding the HIGH-FLOW kit, and a Sonic Pad to your S1 (I have a High-Flow Kit install video). OR: Get an Ender 3 V3 KE or CR10-SE. However, there are ways to help with prints times, on the slicing side. While I am not somebody that focuses on speed, perhaps a video on that topic would be helpful.

@Overlandingireland 6 ай бұрын

Has anybody ever had an issue with the fan shroud touching and tearing the first few layers? love the video by the way, nice and clear explanations.

@3DRundown 6 ай бұрын

It's likely not seated right. Loosen the screws and tilt the entire hot end. Or, then fan itself, back a smidge.

@kutsanan Жыл бұрын

great video thanks

@lublubh6034 Жыл бұрын

This video is a life saver!!!! Thank you for this amazing tutorial because my S1 was with some bad layers and this video helped me a lot!!

@3DRundown Жыл бұрын

Epic love this. Your welcome!! Check out the pinned comment on the video. 🙌🏼

@martinoffermann2238 Ай бұрын

Thanks a lot👍

@chopperreed5274 6 ай бұрын

GREAT CONTENT HERE! I just received this printer for my son, for X-mas and looking forward to setting it up for him. This video will definitely help getting the initial setup perfect, but why can't I save this video on my watch later que???

@3DRundown 6 ай бұрын

This is my #2 most watched video ever, and I made it out of neccessity. Please do follow it, and also be sure to follow my Tramming and ABL video for this printer. You'll have a much better experience, getting this all out of the way up front. Also.... I have no idea!?! You should be able to...

@kevinlotero3871 10 ай бұрын

Muchas gracias me ayudaste mucho, saludos desde Argentina

@3DRundown 10 ай бұрын

Greetings from NJ USA

@Red11John Жыл бұрын

Great video. In video is mentioned that link to SanDisk card will be shared in description. I cant find it . Can you share link to card and adapter for card ?

@3DRundown Жыл бұрын

Forgot!! Thanks for the nudge. amzn.to/3XFwQHG

@zac2877 4 ай бұрын

dig your videos sir. i bet your hilarious in RL....for some reason ;D lol subscribed thx for giving your time to make this and sharing your knowledge, wisdom, and time with us, the....collective consciousness ;D

@3DRundown 4 ай бұрын

😂🤣 I'm a clown in real life. It's so hard for me to be serious. Lol. We'd be laughing.... allot. Also, my pleasure. Thanks for being here.

@zac2877 4 ай бұрын

@@3DRundown dont tell me your an ACTUAL clown...like...as in...my buddy clowns for a living? cuz if you are ive got to give myself a trophy on picking it out thru an instructional video.... but if you mean "clown in your heart" then all i can say is takes one to know one 🤣

@sabilabbas5271 Жыл бұрын

Man you are awesome

@3DRundown Жыл бұрын

So are you, friend. 🤜🏼🤛🏼

@lucasmaximilianokramer6161 7 ай бұрын

Thanks!

@3DRundown 7 ай бұрын

Thank you friend! "Super Thanks" mean alllot to me!

@R0DR1G0S Жыл бұрын

Nice video! I have heard a lot of uneaven or bad layer lines on the S1 and many people blame the Sprite extruder, in your experience is that true?

@3DRundown Жыл бұрын

I very much dislike the S1. Mine has been a royal pain. That said, lot's of Sprites are out in the wild, on all sorts of machines and people are having good success with them. My S1+, prints massive masks in Silk Silver, flawlessly. I don't think it's the Sprite. I think it's poor assembly and Q/C

@tinkermakerman Жыл бұрын

thanks Gregg. this video is great. was the print from thingi?

@3DRundown Жыл бұрын

Thanks! Your welcome! My bad, I meant to link it: 1drv.ms/u/s!AsUNEpEglKSchshUt3Ge9_VRfXeV5w?e=zw51KN

@wowfunnyjoke1322 9 ай бұрын

How would I go about installing and different firmware and which would I choose? I’ve seen people needing to purchase SonicPads for stuff like that and it looked quite daunting. Also, great video! I haven’t been able to find anyone else doing tweaks to the Ender 3 S1.

@3DRundown 9 ай бұрын

Sonic pad isn't so bad. Don't be afraid. It DOES require some new learning, but, it's not too bad. Firmware is pretty easy. You do it via memory card. I would use MRISCOC for the S1 (not the pro). Firmware goes on a card. Card in machine. Turn it on. That's it. You may also need to update the screen, the same way. There is a slot on the screens PCB.

@Blazs120gl 8 ай бұрын

Hi, when adjusting the gantry wheels, hogy firm should the single inside wheel be? For me they are super tight and they get tighter as I go lower and lower on the Z axis.

@3DRundown 8 ай бұрын

You should be able to turn them with 2 fingers, and should feel firm-ish. Sounds like the sides are a little miss aligned. Loosen their nuts a little. Move Z all the way up and down. Tighten them.

@3DRundown 10 ай бұрын

Join this channel to get access to perks, such as priority message replies: kzfaq.info/love/bUb8QjvZiimB-8sN6oDl9Qjoin

@jettryker 10 ай бұрын

This helped a lot! Thank you! For me, I think it was the Cura settings that helped the most. I’m getting some layer tears every once in a while and I’m not sure why. The rest of the model looks great, but it’ll be a small section of the layer by the z seam. Any recommendations?

@3DRundown 10 ай бұрын

Lemme see it

@jettryker 10 ай бұрын

I’d appreciate that. What’s the best way to contact you? Email, social media?

@3DRundown 10 ай бұрын

Can email me. Email is in my ABOUT Section. Can also find me on Instagram, and FB under the same handle. Of course, if you pop onto my course 3DRUNDOWN.COM, or Patreon: www.patreon.com/3DRUNDOWN, it's even easier to reach me.

@jettryker 10 ай бұрын

@@3DRundown I'll email you. Thank you!

@3DRundown 10 ай бұрын

I will do my very best to reply and help. I deal with allot. Forgive me if I'm slow.

@AI-Creations-LLC 2 ай бұрын

Maybe you can help me but I have absolutely no problems with small prints. But big prints seem to go wrong. Especially when its laying down the first layer. Its almost like its missing whole spots.and when it misses those spots it fucks up the rest of the print. Sometimes it causes my head to get jammed.

@3DRundown 2 ай бұрын

Feels like a Tramming and Bed Mesh issue. I would follow my S1 Tramming/ABL video, and make sure you are using "M420 S1" in your GCODE after line G28

@Rich_Cardboard 4 ай бұрын

Would these changes be the same on a ender 3 s1 pro? Or is there a different process?

@3DRundown 4 ай бұрын

They are identical. Only the Screen & Heat break are different.

@mildmannered1086 Жыл бұрын

Thanks! Any ideas if the X-axis belt is rubbing? As in it's not running centrally on the adjusted knob side...

@3DRundown Жыл бұрын

Rubbing... Is the tensioner itself, or the gear, in some way crooked? I would remove it and reinstall it. I have not encountered this. Elabortate?

@mildmannered1086 Жыл бұрын

@@3DRundown I think it must be the gear angle, having the belt roll to the edge and rub. :( Thanks for your reply Gregg

@iamjawnwick Жыл бұрын

3:53 amen brother

@chananel9756 Жыл бұрын

Hi I have an ender 3 s1 and I connected a fan to it and it gave off a burnt smell and now the fan doesn't work I tried to change the fan I tried the motherboard in the extruder and it still doesn't work I would be happy if you could tell me if you know what the problem could be

@3DRundown Жыл бұрын

Bummer. I would disconect as much of the electronics as possbile, and see if the board will turn on with the screen. Make sure the power supply is set to 110, and not 220

@leonardoinhoqui 4 ай бұрын

I've been tinkering with mine for weeks and I don't think it's a problem where it generates some ripples in the vertical, looking like resonance, making 3mm cubes at 30/35mhs, it's very noticeable and a low speed for this printer. I don't know where else to turn because I've already done countless tests, including testing with very tight, medium, loose straps, etc. The printer is very firm, I disassembled it completely, cleaned all the areas that had dirt on them, thinking it would solve the problem and I can't solve the problem.

@SinisterGamingTabletop Жыл бұрын

I put glass and clips like that once. First time I ran a level test it knocked them off and sent them flying...lol

@3DRundown Жыл бұрын

🤣😂 Use strong ones, and only use about half the clip depth. run an ABL, and adjust them out of the way. Good to go. ✌️

@garthy1982 4 ай бұрын

So many videos on the S1 and not on of you is covering the top belt the only thing that I need to adjust as its loose as hell :(

@3DRundown 4 ай бұрын

A.) cut it, crimp it tighter, with a copper buckle: amzn.to/3Ujl6vU B.) Get a new belt & buckle set: amzn.to/3HuFEKp C.) Get one pre-made: amzn.to/3SykjGw

@garthy1982 4 ай бұрын

@@3DRundown legend for the reply thank you very much

@TBL_stevennelson Жыл бұрын

I tried to make videos You are a Pro

@3DRundown Жыл бұрын

Making videos is a royal pain in the ass. I've worked hard at it my whole life and still feel like I kinda suck. Thank you. 🤜🏼🤛🏼

@MrChans_S3 8 ай бұрын

I’m wondering I have a belt at the very top of the printer that’s loose that’s drives the up and down for the extruder is it suppose to be loose?

@3DRundown 8 ай бұрын

Which model. Sounds like a sync belt. keeps the 2 lead screws in sync. SHouldn't bee too loose....

@MrChans_S3 8 ай бұрын

@@3DRundown it’s an ender 3 s1 pro it’s very loose.

@tomek_kot Жыл бұрын

This video should be seen by every s1 owner. I've done all this and more, and I still haven't eliminated the inconsistent layer height🤦‍♂️

@3DRundown Жыл бұрын

Crud. The S1 can be challenging.

@ali_osman_ozturk Жыл бұрын

I also have the layer height problem. I'm fed up with this problem of this printer. Supposedly it is 96% installed, you tighten two screws and start printing. This is a big lie.

@craftsmanchris7 9 ай бұрын

Great video man. I am using ender 3 s1 pro and the v wheels on the sides of the Z-axis are imbalanced, meaning that when I adjust the eccentric nut 2/3 are rolling as they should be but the other is not moving at all. I tried what you said with the other two bolts which kind of worked but when the Z-axis moved up 1 wheel was hardly rolling. Any ideas?

@3DRundown 9 ай бұрын

Make sure the machine is square. Bring the Z all the way up, and adjust the rails up there a bit

@craftsmanchris7 9 ай бұрын

@@3DRundown Thanks for getting back to me, I will give it a try. I uploaded a video showing the issues with my Ender S1 pro. Can you please tell if you can help me out? kzfaq.info/get/bejne/j52jhMqnuqvOYKs.html

@3DRundown 9 ай бұрын

I'll try. Bare with me. Super overwhelming time for me.

@MrBateau 5 ай бұрын

genius

@panosfxable 7 ай бұрын

Hey i am trying to install the professional software but when inserting the memory after i start the printer it gets bricked and i have to reflash the previous latest marlin version i have to unbrick it. Any ideas how can i fix this? Thanks.

@3DRundown 7 ай бұрын

Possibly using firmware for the wrong chip. There are F1 and F4

@panosfxable 7 ай бұрын

@@3DRundown no I made sure was for the f4 chip that I have.

@leonardojoy Жыл бұрын

And where is the before/after print to compare?

@3DRundown Жыл бұрын

In my Hand.....and On my FACE.

@MichaelDeeterIA Жыл бұрын

Did you have any issues upgrading your firmware? I got an Ender 3 S1 in September and I tried to update the firmware but it failed. Some research shows that it's likely related to the chipset on my printer (STM32F401). Any suggestions on how to upgrade/change it as easily as possible?

@3DRundown Жыл бұрын

Hi. Firmware is pretty easy. But...... there is an F1 and F4 chipset. Must be sure you use the proper firmware to match the chip on your machine. Also, thanks for the reminder! I am going to link to better firmware in the description. I'll try to do it tmrw (Thursday)

@Gtamaster2612 Жыл бұрын

You must have the folder within the .bin ,Not the bin alone on the Card wirh the F4 chip

@3DRundown Жыл бұрын

github.com/mriscoc/Ender3V2S1

@3DRundown Жыл бұрын

Right. F4 has 2 Folders, and a file, inside 1 folder, that does the screen and mainboard. F1, is a single Bin file, that goes in the root directory. Screen can be updated seperately. Both official firmware updates, come with a txt file, to explain.