No video

Tuning Marimba Bars with Altair Inspire

  Рет қаралды 13,203

Altair

Altair

Күн бұрын

We’re following Altair CTO James Dagg on a fun project to build a Marimba with his son! Using Altair Inspire, they used simulation to show how Marimba bars are tuned before making them with Brazilian cherry wood! Watch (and listen!) to the video:

Пікірлер: 9
@institutodemusicaspegazzin9386
@institutodemusicaspegazzin9386 2 жыл бұрын
Thanks from Argentina!
@Edelce
@Edelce 4 жыл бұрын
thank you so much, this video has been incredibly useful
@MeowfaceMusic
@MeowfaceMusic 2 жыл бұрын
Might you know of an ultra-advanced method for node-finding, like a fancy camera that detects/shows vibration-imagining? Might you know how the big boys do it? I can’t imagine the Marimba One and Yamaha guys doing the salt trick for all their thousands of bars. 🙂
@MeowfaceMusic
@MeowfaceMusic 2 жыл бұрын
Wooden bars over time slipping out of tune: Both factors combined--wood drying out and abuse--which direction in pitch do bars tend to go? What percentage of bars go flat? What percentage of bars go sharp? Consistent and predictable? Thanks : )
@jack-sm7jy
@jack-sm7jy 2 жыл бұрын
What kind of wood is that ?
@GuruPercussion
@GuruPercussion 5 жыл бұрын
I wait you can answer my ask. From which key does it start tuning overtones and what does it do if it does not reach the desired overtones?
@cpatlynch
@cpatlynch 4 жыл бұрын
Hey MUSOFT a bit late, but I am in the process of building a marimba as well. For myself, my tuning roughly follows: C2-C4 (fundamental, 2nd transverse, and 3rd transverse), C4-C6 (fundamental, and 2nd transverse), and then C6-C7 (just the fundamental). the first two are the most important, and I tuned the 2nd transverse as much as I could until around the C6 bar. This was a really nice resource for me www.lafavre.us/tuning-marimba.htm . Also, great job guys on the marimba!
@GuruPercussion
@GuruPercussion 4 жыл бұрын
@@cpatlynch Thank you very much for the information. I already tuned all my bars (4 octaves). Now I'm fine tuning the resonator tubes. I also recommend this website. There is valuable information, you can write an email to its creator, he is a very kind person and helped me understand many things about overtones. www.hopestreetmarimba.com/
@cpatlynch
@cpatlynch 4 жыл бұрын
@@GuruPercussion thanks too, I'll look in the website!
Marimba Bar - Build it Fix it!
11:52
pintopercussion
Рет қаралды 8 М.
De-Tuning the Vibraphone
11:42
dtlewismusic
Рет қаралды 2,7 М.
الذرة أنقذت حياتي🌽😱
00:27
Cool Tool SHORTS Arabic
Рет қаралды 6 МЛН
Ouch.. 🤕
00:30
Celine & Michiel
Рет қаралды 45 МЛН
Gli occhiali da sole non mi hanno coperto! 😎
00:13
Senza Limiti
Рет қаралды 16 МЛН
Tuning Your marimbas and your xylophone bars
5:56
Zion Marimba
Рет қаралды 32 М.
Entire piano filled with water sounds UNREAL
19:54
Mattias Krantz
Рет қаралды 6 МЛН
Mr  Benson's Workshop Episode 2 - Marimba Bar Tuning
14:21
Brett Benson
Рет қаралды 1,9 М.
How We Built A (Practical) Marimba During Quarantine!
20:43
Kaitlyn Z
Рет қаралды 39 М.
Tuning Marimbas - Finding the Nodes
7:29
percussionclinic
Рет қаралды 61 М.
Building a tilefloorophone (actually two)
6:27
Nicolas Bras
Рет қаралды 76 М.
How I built a wooden Xylophone
18:16
Darren Barclay
Рет қаралды 12 М.
Aluminum xylophone build part 2: Tuning
20:25
OldTown
Рет қаралды 4,7 М.
The Process of Making 'Moktak' for Buddhist Monks. Woodworking Master with 50 Years of Experience.
18:42
الذرة أنقذت حياتي🌽😱
00:27
Cool Tool SHORTS Arabic
Рет қаралды 6 МЛН