How to start and tune up ur radar . Setting, sea clutter and gain.
Пікірлер: 11
@ashak.k81532 жыл бұрын
Good morning sir..your information very good
@jonaslindgren51474 жыл бұрын
Do not use the EAV and ES during tuning of radar. You should get a good picture without that turned on. GAIN should be adjusted so you have a slight amount of seaclutter visible, so you dont loose small targets. Then you adjust the Sea-clutter to eliminate unwanted signals. refering to Operators Manual about adjusting sensitivity.
@merchantshipsknowledge39414 жыл бұрын
Thnku very much for ur comment. I highly appreciate :) U r right :) But EAV helps u to diminish or remove all those unwanted or false echoes, EAV actually averages echoe appearing on PPI, so remove unwanted and false echoes, so its helpful.
@jonaslindgren51474 жыл бұрын
@@merchantshipsknowledge3941 Absolutely, its very helpful but can also be dangerous if you dont know the functionality of it. EAV calculates if a certain ehoes appears on same position twice, then it flags it as an echo and raise the echolevel. Differently on EAV1, EAV2 and 3... With EAV 2 the limitation is that you can loose fast going vessels because the radar thinks its seaclutter. (moving to fast and not in same calculated position) Keep up the work!
@pharmacohlic_61103 жыл бұрын
Goood job.. Sir
@navneetsharma16614 жыл бұрын
make more videos it helps me alot , make one video on AIS also
@merchantshipsknowledge39414 жыл бұрын
Video for AIS will be uploaded by soon. Thnks fr support. Do share our vides and subscribe our chanel :)
@merchantshipsknowledge39414 жыл бұрын
Video for AIS is out
@user-lk1qx5xd5r3 жыл бұрын
Good afternoon. I need your help. What does "COG", "SOG" mean. Autumn I need your help. 
@dutchskyrimgamer.youtube27482 жыл бұрын
COG= Course over Ground. SOG= Speed over Ground. You can find these two on your Doppler Log.