Tuning the low and high speed needle of your nitro engine . Kyosho mp9 tki4. Good and bad signs
Рет қаралды 26,594
3 жыл бұрынHere is a video showing the signs of a good and bad setting of your nitro engine .
Old videos which I put as one . Skip to 2.44 for a look on the low speed needle .
Showing the settings for the high and low speed needle and how to correct them .
Subscribe for new content
#nitrorcbuggy
#nitrotunin
#kyosho
#mp9tki4
@Yroc5000 2 жыл бұрын
Best tutorial for high/low speed needles right here
@dozyrcworld3847 2 жыл бұрын
Thank you . Glad it helped
@jonodamafaiadon9937 3 ай бұрын
The best video for me on tuning thus far!! Less talking, more explaining ppl
@AllAroundTheClock247 2 ай бұрын
Awesome video. Straight to the point. You Are The Man
@Joell-uf7gs 2 жыл бұрын
Most helpful video I’ve seen about nitro cars just trying to get in to it just bought one thank you for the tips
@dozyrcworld3847 2 жыл бұрын
Awesome I’m glad it can help you . Any problems please contact me will be happy to help you .
@user-qf1gk4ed5z Жыл бұрын
Best explanations I've seen, thank you!
@GavinY 2 жыл бұрын
this helped me diagnose lean low speed, best video, straight to the poiny
@dozyrcworld3847 2 жыл бұрын
I’m glad it helped 🏎🏎💨💨
@johnbravo7542 3 ай бұрын
Very well explained,very good video.
@sermecanicmoura 2 жыл бұрын
Best of the best. Great theacher.👍
@Nick.Tran7777 3 жыл бұрын
It’s very good ! Nice bike !!! I like it - thanks you
@Hitman-os1sp Жыл бұрын
Very good and helpful tutorial. Thanks.
@dozyrcworld3847 Жыл бұрын
No problem I’m glad it can be of some help
@guzziman96 2 жыл бұрын
Insanly easy and notimewasting video, well done!!
@dozyrcworld3847 2 жыл бұрын
Thank you . That was my point sort and simple and explaining
@tnpa3769 2 жыл бұрын
Thank you for share , is Avery good guide to set my nitro buggy. 👍🏻
@justinchan2096 Ай бұрын
I think I can tune an engine now ...💪💪💪
@The.nitro.keeper 2 жыл бұрын
This is just what i needed as I’m about to buy my first nitro
@dozyrcworld3847 2 жыл бұрын
Awesome which one are you getting ?? Any problems please message me ,
@The.nitro.keeper 2 жыл бұрын
@@dozyrcworld3847 I’m on a budget as I’m a cater for my wife so a hpi warhead
@dozyrcworld3847 2 жыл бұрын
@@The.nitro.keeper awesome good one to get into the hobby
@Fed--wr8nb 11 ай бұрын
I have same buggy huge help
@louieolalia7718 2 жыл бұрын
Good job sir. Thank you
@dozyrcworld3847 2 жыл бұрын
No problem I’m glad it can help you 🏎🏎🏎💨💨
@hizzleman4111 2 жыл бұрын
Great video. Only one thing, why didn't you trouble shoot the idle?
@foisamika5564 Жыл бұрын
hey any suggestions to fix idle issues? my one will idle for 30secs then die out?
@williamrasen4318 Жыл бұрын
THE BEST
@godsun358 Жыл бұрын
Very understanding even though not a word was said
@dozyrcworld3847 Жыл бұрын
Hey you understood tho 😉😉
@godsun358 Жыл бұрын
@@dozyrcworld3847 for sure best turning vid I've watched
@mugenseiki514 2 жыл бұрын
What brand is a spark plug or its size Os P3 Or Spark plugs of Other sizes
@leonardosena6338 Жыл бұрын
Thank you! I got one MP9 tki3 with the KE21SP, without box and manual. How many turns from closed position, to achieve similar results of the video? Thanks alot!
@denisdenis2034 Жыл бұрын
no engine is the same as the other
@jdportwerks6795 Жыл бұрын
Only part that confused me was at the end where you said if you pinch the line and it takes longer to quit than either richen it up or lean it out but which needle were you talking about were you still concentrated on the low speed needle?
@dozyrcworld3847 Жыл бұрын
Yep pinch test is to do with the low speed needle 🚀🚀🏎🏎
@jdportwerks6795 Жыл бұрын
@@dozyrcworld3847 great👊
@brockclark6989 2 жыл бұрын
My nitro is bogging down when I’m on the gas could u help me
@jeffgrizzle5476 Жыл бұрын
What is a good engine temperature to run?
@dozyrcworld3847 Жыл бұрын
Hello sorry for the late reply I like to keep temps between 220-275F .
@alteredstate7746 2 ай бұрын
Thanks
@dozyrcworld3847 2 ай бұрын
No problem
@alteredstate7746 Ай бұрын
@@dozyrcworld3847 really struggling to get my kyosho buggy in a good tune.. it barely idles for a few seconds then goes off ... and then when i have full trottle it sounds like it gurgles ill try fix it over the weekend
@dozyrcworld3847 Ай бұрын
@@alteredstate7746 make sure the idle gap is around 1.5mm if it’s set to that then it has to be the LSN (low speed needle ) try to lean it out more .
@alteredstate7746 Ай бұрын
@@dozyrcworld3847 much appreciated
@frodestrm9910 2 жыл бұрын
Is the pinch test done on a warm or cold engine?
@dozyrcworld3847 2 жыл бұрын
Warm
@frodestrm9910 2 жыл бұрын
Thanks 🙏
@RustybeltRC 2 жыл бұрын
What percent of fuel were you using?
@dozyrcworld3847 2 жыл бұрын
Hello using 25%
@sendit2873 3 жыл бұрын
you never touch those screws until you get to full temp
@dozyrcworld3847 3 жыл бұрын
Good job it was up to temp . Heated it with engine heater before starting this vid .
@davidwright4460 2 жыл бұрын
Just subscribe and like best video
@denisdenis2034 Жыл бұрын
Hello I don't want to be mean, but since I've been a 2-cycle engine mechanic for over 50 years, I can see that you don't know anything about it. You should remove your video people will seize their engines. I've never seen such a bad way to adjust a Nitro-powered carburetor. Sorry but it's the truth!!
@dozyrcworld3847 Жыл бұрын
Thanks for your comment much appreciated 👍🏻👍🏻
ОВР Шоу
Рет қаралды 6 МЛН
Invisible Speed RC
Рет қаралды 183 М.
Passionate About RC
Рет қаралды 375 М.
DOZY RC WORLD
Рет қаралды 41 М.
Razor RC
Рет қаралды 16 М.
Invisible Speed RC
Рет қаралды 59 М.