TurboAnt X7 Pro, HX X8 Electric Scooter Controller Replacement
Рет қаралды 3,111
Жыл бұрынVideo showing how to remove and replace the controller on the TurboAnt X7 Pro, Hx X8 and Decent One Max electric scooters. The process is the same for all scooters that are made by HX with the removable battery in the stem, such as Decent One Max, TurboAnt X7, Riley electric scooters.
Tools required: T25 torx key, cable cutters, knife, heat shrink tubing and electrical tape.
When replacing the controller check with supplier that the replacement unit matches the old unit otherwise it may not work. The controller needs to match with the display controller otherwise it won't work.
For further details visit horizonmicromobility.com
If you have any comments please ask in comments section.
Music from Uppbeat (free for Creators!):
uppbeat.io/t/soundroll/lo-fi-...
License code: 9ZMOTDCOXMUXE6ZF
@HackedBy Жыл бұрын
😢Thanks to you now I’m gonna purchase the controller and replace it with the help of your video tutorial! I was looking for hours, the name of the part, video tutorial on how to fix it. My scooter battery connector broke off and the wires ripped off, I was gonna have some more solder it but now thanks you I can now replace the entire part and achieve a clean profesional job, all thanks to you!. Thank you. Thank You. Thank You.
@HorizonMicromobility Жыл бұрын
Good luck! It's fairly straightforward. Take your time.
@efrainaguilar6784 4 ай бұрын
What are the symptoms of a bad controler?
@mikedahlstrom6650 9 ай бұрын
There was an extra ground wire on the new unit, no where to connect it? Rain damaged and it still doesn’t work…any ideas?
@HorizonMicromobility 5 ай бұрын
Not sure what you have there
@FrenchHawk878 Жыл бұрын
Can you do a video on how to remove stripped hexed screws to remove tires? The factory or someone at Turboant put the screw in so tight it’s already stripped and now I can’t get it out.
@HorizonMicromobility Жыл бұрын
You're going to need to drill it out. Or use a torx bit, hit it in.
@stephdyer138 Жыл бұрын
Do you have a video that shows replacing the wires below the controller to the motor wheel ?
@HorizonMicromobility Жыл бұрын
Not at the moment. If replacing the motor then it's fairly straightforward.
@stephdyer138 Жыл бұрын
@@HorizonMicromobility its just the cable to the motor i need replacing, looking for the cable itself is an issue, can only see the entire motor and wheel or the controller cable 🤔 also im female trying to fix for my son, nobody where i live fixes them
@HorizonMicromobility Жыл бұрын
@@stephdyer138 not aware if you can buy just cable. Email us a photo and we’ll see if we can help
@andreasnilsson1797 Жыл бұрын
will you have X10 for video soon ?
@HorizonMicromobility Жыл бұрын
No plans to at the moment. It doesn't really fit in with our current product line.
@theebikeguy3852 Жыл бұрын
Do you know of anyone who has the HX7 T010-K-V3-1 17A Controller in stock?
@HorizonMicromobility Жыл бұрын
We should have that, email us and we can check
@marine1718 Жыл бұрын
Hi there my scooter beeps very low the press the power button but does not turn on any solution?
@georgemolina8780 Жыл бұрын
Did you find a fix for this?
@marine1718 Жыл бұрын
@@georgemolina8780 bought new controller and screen
Horizon Micromobility
Рет қаралды 31 М.
Horizon Micromobility
Рет қаралды 15 М.
Achtung Kontrolle
Рет қаралды 554 М.
ПМ АВТО ГРУПП
Рет қаралды 4,4 МЛН