Turnado : Copying Parts, Ball Turning, and Crazy Godlike Powers

Рет қаралды 320,379

Жыл бұрын

This episode on Blondihacks, I’m exploring the Turnado! Exclusive videos, drawings, models & plans available on Patreon!
/ quinndunki
Buy Blondihacks stuff in my store! www.blondihacks.com/store
Official Turnado video: • The Turnado Freehand M...
John Creasy’s Turnado: • Turnado Lathe Attachment
Preso’s Turnado: • Building the Titan .60...
Here are links for many of the tools that you see me using:
(I earn small commissions on these links)
• “Kant Twist” style clamps : d-gray-drafting-and-design.my...
• Shrum Solutions face mill: www.shrumsolutions.com/shop?p...
• Rose Index : rosenthalproducts.com
• Mill clamping set : amzn.to/2xc9vqr
• Chamfering Tool : amzn.to/2IJsAUs
• Zero Flute Chamfering Tool : amzn.to/3bmPLPe
• NOGA Deburring set : amzn.to/2Jv3RlW
• NOGA Reversible Deburring Tool : amzn.to/2X07WX1
• Knurling Tool : amzn.to/2FblXb1
• Tapered Reamer : amzn.to/2Gn0b3G
• Chucking Reamer set : amzn.to/3odnVvh
• Nicholson files : amzn.to/2VcHkls
• Nicholson needle files : amzn.to/2BDt7ph
• 1-2-3 Blocks : amzn.to/2EvAsGq
• Dormer center drills : amzn.to/2X7U6ij
• 6” Divider : amzn.to/2GTncM3
• NOGA arm with magnetic base : amzn.to/2U2bGTI
• NOGA arm Big Boy : amzn.to/381acji
• Collet Block set : amzn.to/2UkF1vZ
• DeWalt drill and driver kit : amzn.to/2Gp6IeJ
• DeWalt portable band saw : amzn.to/2U4Mhsw
• DeWalt band saw blades : amzn.to/2H2J4X0
• High Speed Steel parting blade : amzn.to/2YcdYBv
• High Speed Steel blade holder : amzn.to/2JgO0IK
• High Speed Steel tool blanks : amzn.to/2H1qoqr
• Grizzly Pre-ground tool bits : amzn.to/2H4yr5z
• AXA tool holders : amzn.to/2V1gOHl
• Quick Change Toolpost : amzn.to/310mshq
• Norton oil stone kit : amzn.to/2EbLEH3
• Norton small sharpening stone: amzn.to/2PQwex9
• End mills : amzn.to/2U76Vsf
• Milling machine starter pack : amzn.to/2tA2M4e
• Forceps : amzn.to/2Ww5dFT
• Mill Parallels : amzn.to/2lfW82i
• GearWrench ratcheting tap & die set : amzn.to/2lMwZfV
• Step bits : amzn.to/2q54yfJ
• Starrett automatic center punch : amzn.to/2DCI7C9
• Budget transfer punch set : amzn.to/2yfDgHi
• Precision shim stock : amzn.to/34lJlME
• Jet 2-ton press : amzn.to/2SLas1s
• Gear Wrench locking puller : amzn.to/2ubBV1W
• Starrett tap wrenches : amzn.to/35jxM9e
• Goldenrod oiler : amzn.to/2TTS0En
• Acid brushes : amzn.to/36qWCo5
• Cratex (Bright Boy) block : amzn.to/38fNm72
• Scotchbrite deburring wheel : amzn.to/3ks0P2V
• Fein Turbo I shop vac : amzn.to/2vXpech
• Loc-Line (1/2”) : amzn.to/2U7JznB
• Loc-Line Pliers : amzn.to/2vWlXKf
• Machinist’s scale : amzn.to/2Zk6oVj
• Mixed metric/imperial dial caliper : amzn.to/2KKARYY
• Mitutoyo dial caliper : amzn.to/2IMIxJE
• Mitutoyo micrometer set : amzn.to/2GtICPx
• Mitutoyo depth micrometer : amzn.to/33M8aSH
• Mitutoyo edge finder : amzn.to/2G36omq
• Mitutoyo dial indicator : amzn.to/2H09gBr
• Mitutoyo dial test indicator : amzn.to/2E5lRQw
• Coaxial indicator : amzn.to/3bbBEwE
• Mitutoyo telescoping gauge set : amzn.to/2Z6houn
• Fowler dial bore gauge : amzn.to/2KQJNf2
• Fowler inside micrometer : amzn.to/2TVm7Jo
• Starrett 98-6 Level : amzn.to/38K7lMD
• Grizzly Height Gage : amzn.to/2PDTr7i
• Thread Checker : amzn.to/2CpvAUU
• The Amateur’s Lathe book : amzn.to/3jIYlwe
• Anchor Lube : amzn.to/2H9X6oQ
• Boeshield T-9 : amzn.to/2TCE0wB
• Brownell’s Oxpho Blue : amzn.to/2YhZTmR
• JAX Metal Blackener : amzn.to/2MVe8wj
• Dykem layout fluid : amzn.to/2U7KQts
• Dykem dauber : amzn.to/2uoXtbm
• Tap Magic cutting oil : amzn.to/37uYzRS
• WD-40 : amzn.to/2GYV8rY
• Super 77 Spray Glue : amzn.to/2YScxZl
• Loctite 603 : amzn.to/2EYsPbi
• Loctite 242 : amzn.to/2RIt3sQ
• Way oil : amzn.to/38Gl9qW
• High pressure grease : amzn.to/2GloHTd
• CMD Extreme Pressure lube : amzn.to/36JPNy9
• Dry graphite lube : amzn.to/2U0YEZH
• 3-in-1 oil : amzn.to/36in43e
• Kroil : amzn.to/2uCf1RL
• Evaporust : amzn.to/36NSkII
• Brasso : amzn.to/3buE6yL
Commenting policy : blondihacks.com/commenting-po...
Want more content like this? Try these places:
Blondihacks on Instagram : / blondihacks
Blondihacks on Twitter : / quinndunki
Blondihacks on Patreon : / quinndunki
As an Amazon Associate, I earn from qualifying purchases.

Пікірлер: 344

@johnglover3151 Жыл бұрын

You have just changes my life.... Making my chess set will only take 2 years now instead of the 7 I was thinking

@yowie0889 Жыл бұрын

You would have more of the chess set done by now if you weren't spending your evenings tunneling out of Shawshank prison behind a poster of Rita Hayworth.

@Argosh Жыл бұрын

Usually my time saving efforts end up slightly in the red numbers XD

@paramax55 Жыл бұрын

Me: I'm going to make a chess set on my lathe. Look at how good my first pawn came out. My friend: How are you going to make the knights? Me: Shut up.

@roadshowautosports Жыл бұрын

The optimistics say 2 years, the pessimists say “last career project before arthritis settle in”

@johnglover3151 Жыл бұрын

@@roadshowautosports Well it is going to be a retirement project intended to keep me out of the way of SWMBO who would otherwise find many many many other things to occupy my time. The more I think about it - it might be like painting the Forth Road Bridge - and I will never finish 😁😁😁😁.

@ruftime Жыл бұрын

Congrats on the new shop Quinn! 4:20 Dying in a collapsed pile of end-cuts suggests a life well lived😎

@jamesburgess6454 7 ай бұрын

Rarely do I laugh out loud at a KZfaq video but this got me. Quinn has such a great sense of humor!

@IanSlothieRolfe Жыл бұрын

I first saw this tool on Prezzo's channel, and was astonished at how clever it was, it had never occurred to me that this would be possible on a metal lathe. I can see how anyone wanting to make steam-age models would see this as essential for all those brass finials and linkages on their Victorian/Edwardian models. Great for shower doorknobs, too!

@billclanton1140 Жыл бұрын

000

@carloheinz6465 5 күн бұрын

I like the way you keep your offcuts. Clean and properly marked😊

@daveys Жыл бұрын

I liked that technique of using the tailstock as a guide at the end. Cool little tip there!

@billl7551 Ай бұрын

I will now attempt (15 yr delay) to replicate the badly corroded original compound handles on my Logan 820. Thanks for an excellent technical channel.

@CreaseysWorkshop Жыл бұрын

Thanks for the shoutout Quinn. Welcome to the turnado club! I am still finding new uses for mine. It is definitely hard work though!

@Blondihacks Жыл бұрын

Your video was very helpful! 😄

@CreaseysWorkshop Жыл бұрын

@@Blondihacks I got a noticeable bump in views! The Blondihacks effect! :D

@Blondihacks Жыл бұрын

@@CreaseysWorkshop Haha, that's great! 😄

@mechaform Жыл бұрын

I hope that all of your viewers (past and future) appreciate and pick up on the little gems of information scattered within this presentation. Kudos.

@erniewelz Жыл бұрын

Hi Quinn. I’m a newcomer to your channel. I’ve really enjoyed watching a few recent videos and going back through the catalog of old series and videos you have already done. I’m a machinist by trade in the US and really like sitting back and watching you work. Hopefully one day I can have a hobby shop of my own and make stuff I want to make instead of huge parts for our customers here. You seem very knowledgeable and I love the tempo of your content. I definitely subscribed and hope to stick around as long as I can. Thanks for your time!

@PatrickPoet Жыл бұрын

It's so easy for me to understand you since I'm a retired software engineer into electronics and machining. You just make sense to me. I'm glad you're there and I'm glad so many others follow your channel.

@Dive_Me_Crazy Жыл бұрын

The lighting in the new workshop looks fantastic

@evanbarnes9984 Жыл бұрын

I still don't have a mill or lathe, or even the space or funds for them, but when I do I'll be so prepared from watching your videos!

@Lexify Жыл бұрын

It's worth checking if there's any local community workshops near you. I found one and it let me play with machines I'd never be able to afford!

@paulkinzer7661 Жыл бұрын

And I already thought machine tools created magic! This is amazing.

@michaelandersen7535 Жыл бұрын

Your lighting is looking really good in the new shop!

@matthewlhouck Жыл бұрын

Yea her lighting looks real crisp in the new shop

@robertwalker7457 Жыл бұрын

Thanks for that, Eccentric's Diamond Tool Holder goes well on small lathes too.

@benchapman5247 Жыл бұрын

It goes well on bigger lathes too. It's all I use for aluminium and brass due to the ease of getting accurate razor sharp tips. I have one of the original larger versions that can take 3/8" HSS as well as 5/16". I dont have the LH one though, only RH, eventually I will need to add it.

@robertwalker7457 Жыл бұрын

@@benchapman5247 Thanks, I am using the 1/4 Crobalt on just about everything. The LH is worth getting too.

@carlwilson1772 Жыл бұрын

Astonishing. What a fabulous piece of kit. Eccentric Engineering are well known here in the UK. They advertise in all the Model Engineering publications. Australia to Canada. Great example of Commonwealth cooperation!

@lohikarhu734 Жыл бұрын

She upped and moved across the border to crazy world..

@carlwilson1772 Жыл бұрын

@@lohikarhu734 You are the crazy ones. You could still be in the fold if you hadn't thrown all that tea in the harbour.

@garydawson5928 Жыл бұрын

too right🦘🙃

@maple5793 Жыл бұрын

Listening to your thought processes really enhanced my learning, thanks. This jig will be on my wish list. Glad that you're back on the air!

@MadeInGreatBritain Жыл бұрын

I purchased one of these about 5 months ago and I have loved it every day since!

@Youtubeforcedmetochangemyname Жыл бұрын

I have a bunch of offcuts bolts plate bar you name it I can't seem to get rid of it but when I have in the past it never failed that 2 days later I needed what I tossed out

@tkat6442 Жыл бұрын

This is fascinating! I have a busy day today, but as soon as I can come up for air, I'm going to spend some time on this video. Thanks for all you do!

@jonsoons Жыл бұрын

That shim stock trick was worth the price of entry. Thank you!

@beautifulsmall Жыл бұрын

Fantastic tool, to feel the metal cutting in your fingers, heady moment. A paintbrush, like TIG .Like the copying feature and tailstock tip. Only the watch makers cut raw netal by single fulcrum, great to see this forward footed company making art tools.

@middleway1885 Жыл бұрын

Thanks for all the yummy episodes to view and learn from... Cheers!

@tinaliebe5118 8 ай бұрын

My chest peaces would be called the odd bunch I think blondi world call me a shenanigan😂😂❤

@kingofcastlechaos Жыл бұрын

Watchmaker lathes are Kings of the Land of Freehand. Very cool to see this done on slightly larger lathes.

@spudnickuk Жыл бұрын

wow i have learnt something new about using a vice and mine is the same as yours, I did not know why there were threads in the back. Anyway, what a faboulouse and well made device Thank you for showing.

@Noxictyz Жыл бұрын

Why hasn't KZfaq recommended your channel to me before. Awesome work and fun witty commentary :)

@aaronmott208 Жыл бұрын

11:07 the most helpful conversion to ever exist 😂

@adelheidsnel5171 Жыл бұрын

That is such a great tool!!! In awe of the result with the scribe!

@bernieshort6311 Жыл бұрын

Hi Quinn, a nice addition to your toolroom. Chris of Click Spring free styles many a job using a less exacting method than the Turnado. I only mention this because you have mentioned Chris in the past. Stay safe and thank you for sharing this unique tool with us.

@rpavlik1 Жыл бұрын

I thought of that too - but he's usually making really small things in brass, which is why he can get away with it I think.

@ractorc91 Жыл бұрын

Yes, Chris is using the traditional watch/clock makers form of free hand turning. It's how all the parts used to be made before precision slides were common on lathes. You can be incredibly accurate, but it does require a lot of skill. The turnado seems to open the doors to those who want an easier and safer way to go about free hand turning. The copy attachment looks really useful as well, for those repeat parts!

@TheUncleRuckus Жыл бұрын

Oh was this is awesome!! I'm looking forward to see you incorporate this badass new tool into future projects! 👍👍

@billofalltrades2633 Жыл бұрын

Absolutely brilliant tool! Well done.

@Uncle-Duncan-Shack Жыл бұрын

That's very nice, so one could 3D print a template and then cut the end product with this tool. Awesome. Thanks for sharing!

@springwoodcottage4248 Жыл бұрын

Wow! How fabulous! As I realised what this could do ideas flew to mind. I thought one could 3d print in pla & then replicate in steel. Thank you so much for sharing!

@SolarGranulation Жыл бұрын

That was absolutely marvellous!

@barssbailey Жыл бұрын

wonder if you could add a lever to the contour linkage, get some mechanical advantage and increase the resolution of your hand movements for surface finish

@andrebyman8744 Жыл бұрын

That sounds like a great idea, and it would probably take a lot of the strain off your fingers ✌🏼

@bostedtap8399 Жыл бұрын

Excellent fitment and demonstration Quinn, well thought out design, looking forward to more to come. Most magnanimous of the viewer donation Great detailed explanation of its function, and compare to the Pantograph. Thanks for sharing and stay safe all. Regards John.

@LordSteven00 Жыл бұрын

Nice! This is just what I needed to make my Christmas ornaments. Cheers!

@johnmcclain3887 Жыл бұрын

Wow, I've been at this fifty years, stole into it, and this is one of the best demonstrations of such a tool I've ever seen. I've done a fair amount of turning metal as per "a wood lathe" to make similar shapes, free-hand, better than nothing, but this looks to be a great asset. Thanks for such good demonstration capability!

@stxrynn Жыл бұрын

Very cool. And 24:00 was worth the price of admission!!! Thanks Miss Quinn-dolen. Outstanding....

@paulthomas3782 Жыл бұрын

Great honest review, I can see this tool would be very handy for cosmetic finish and touches thanks for sharing

@timothybender7383 Жыл бұрын

I just came across your channel for the first time. You re like therapy. 😊

@seniorelectrician6831 Жыл бұрын

Interesting! Glad everything went well in your move and set up

@TEFox Жыл бұрын

I've watched EE demo this on the gram over the past while - with extra interest as a fellow Aussie - and it's awesome to see it in your hands and working well half way around the world. I've got a set of his Diamond Tool Holders and love them to bits.

@TyrellKnifeworks Жыл бұрын

That is about the coolest thing in machining I’ve ever seen! I must have one!!

@NoTimeForThatNow Жыл бұрын

It would be a lot easier to install if you have two lathes!

@CharlesBallowe Жыл бұрын

Lots of part copying rigs that I've seen have some sort of spring or counter weight system to apply a constant pressure to the tool as it feeds back and forth over the work piece up to where the template is hit.

@danielchadwick4452 Жыл бұрын

'Chambers are what separate us from the animals'... love it.

@bme-uk Жыл бұрын

Really good video as usual and looks like a great little tool to add to my wish list !!

@thomaschristensen755 Жыл бұрын

I really enjoy your content. Please keep putting out more.

@benhiggins1396 Жыл бұрын

I am a Toolmaker, it's been some years since I worked in the Trade but I am commencing to set up a tool room at my for something to do in retirement here in Australia. I've watched many of your videos, you are amazing. You could put quite a few Tradesman to shame. All the best. Yours Sincerely Bernard Higgins.

@johndilsaver8409 Жыл бұрын

I'm a fan of Eccentric Engineering, nice to see this device in use. Thanks for posting this.

@dass1333 Жыл бұрын

Lol. I just shared yesterday your ball making video. Now I will share another. That is a incredible tool thanks for showing us.

@millwrightwithahammer7115 Жыл бұрын

Thanks for showing us how to copy parts wow great skills, I have an old 9inch standard modern lathe that I managed to save from the scrappers. I am so happy to find your channel. You think outside the box.😊

@frrapp2366 Жыл бұрын

cool tool and a great explanation of how to use it

@peterlunn1360 Жыл бұрын

As a metal spinner (precious metals mostly) the chucks (formers) were mostly turned freehand by hand on a T rest using just templates as reference, in brass aluminium and steel - a machinist I knew thought it was little short of madness, but everyday practice to me!

@bulletproofpepper2 Жыл бұрын

thanks for sharing! kool tool, but i love the tip you added to the end of the video. your tips and tricks are the most fun.

@kencarlile1212 Жыл бұрын

"why I will someday die in a collapsed pile of offcuts" you and me both, Quinn.

@jeffreyyoung4104 Жыл бұрын

Very interesting tool Quinn! I also like the way Chris at Clickspring does the freehand lathe work as well. Great place for old world treatment of metal turnings! I think this tool can be as accurate as a regular ball turning tool, with many other benefits!

@manythingslefttobuild Жыл бұрын

6:28 nice. Cool tool, thanks for sharing Quinn.

@vernonzehr Жыл бұрын

Holy cow this is awesome... well yes, awesome for you of course. watching this (four months late) allows me to enjoy it vicariously through you, without the risk of potentially losing digits and cash. 😅

@KeritechElectronics Жыл бұрын

Beautiful tricks and ideas. Machining is fascinating!

@AmateurRedneckWorkshop Жыл бұрын

Great demo of a very interesting tool. Thanks for the video keep on keeping on.

@sealpiercing8476 Жыл бұрын

That thing looks like a lot of fun.

@chotuusian4127 Жыл бұрын

Good work and looking lovely

@HotnSpicy7 Жыл бұрын

Inspiring individual! I am now looking into lathe as a hobbyist

@AB_Tool Жыл бұрын

I can't wait for my percsion matthews 12x36 lathe to come in. I've been watching you for many years. I really enjoy your videos and appreciate your effort and knowledge.

@sblack48 4 ай бұрын

I finally got mine installed. I had to make a radiused thingy for a machine I was rebuilding. After getting the turnado mounted and set up I made the part out of mild steel. But then I had to wrangle the turnado off and reinstall my compound to part off the part. If I had to do a few parts it would get old quickly. I think I might try to mount a parting tool on the platform. That was the only drawback I could see and probably easily surmountable

@petereldred1541 Жыл бұрын

Hi, thank you for trailing an Aussie product SWWEEET!, love your work, Peter South Australia, Clare Valley.

@jeffarmstrong1308 Жыл бұрын

I'm glad I subscribe. This video turned [sic] up in my general feed and I was about to pass over it until I saw it was a review BY you. I know the Turnado and have their tool grinding system - built from their plans. I wanted to see what you thought of it. They're a great company.

@instazx2 Жыл бұрын

10:16 "Turns out if you measure things carefully, they fit!" -- someone who doesn't own a 3D printer

@evanbarnes9984 Жыл бұрын

I feel you! That was every experience I had using the CR-10 at my work. She does, though. Those slot plugs on her cross slide are 3d printed

@instazx2 Жыл бұрын

@@evanbarnes9984 does anyone really OWN a 3d printer though? They seem more like cats, in that you share a space with them and sometimes convince them that producing a good part was actually their idea

@evanbarnes9984 Жыл бұрын

@@instazx2 I mean so far, my Prusa is more like a dog. We hang out, do fun things together, play around, explore the world, and just get along! It's actually a tool rather than a project, it's really nice

@jonanderson813 Жыл бұрын

I have of these, it’s terrific for the weird little side jobs. For those folks with hand, wrist, finger and thumb injuries, be aware the continuous hand pressure Quinn talks about cannot be over stated. I went nearly five days of extreme thumb pain, it’s not immediate, onset is over the next 24 hours or so.

@dwaynetube Жыл бұрын

The words you where looking for at the human machine tool bit, where of course "Kneel before Zod!" 🙂

@geoffhaylock6848 Жыл бұрын

Never seen this before. Thanks for sharing.

@jackfromthe60s Жыл бұрын

Great review. I have the Turnado, but I don't have all the fancy accessories you got. That viewer must love your channel, because the full kit ain't cheap! I agree about the amount of force required to make it cut. I found it cut easier when using the opposite end of the tool bit with the large radius cutting edge. So I use that end unless the profile I'm cutting requires the pointy end of the bit.

@BearMeat4Dinner Жыл бұрын

Love da new shop!

@bugkiller5293 Жыл бұрын

SO COOL. on my wish list now

@JeremiahL Жыл бұрын

I like that tip about using shim stock as a drill backstop... I could have used that earlier today when I was drilling L angle.

@briangoodliffe673 Жыл бұрын

Easy Peasy lemon squeezy but only with consent 😂❤

@maitajack Жыл бұрын

Like your new look🥰

@richardconnor2871 Жыл бұрын

Oh! Excentric Engineering! I bought their HSS tangential tool holders for my lathe. Great stuff!

@mattomon1045 Жыл бұрын

Cool Tool Quinn

@fd1053 Жыл бұрын

Great video as always! I am sure Adam Savage would love this.

@dans_Learning_Curve Жыл бұрын

Always enjoy your videos!

@geppettocollodi8945 Жыл бұрын

Very interesting. Great video.

@stevewhitear5044 Жыл бұрын

Hi Blondie, I've just watched the attached video, and I love the attachment you've been sent. But I see you we're having problems getting a perfect sphere to match with the centre point. Here's how I do it and it takes all the guess work out of it. If you use the cross slide on your lathe and move the saddle along the length towards toward the aluminum bar, and here's the tricky bit, whilst rotating the cross slide back and forth, whilst moving the saddle towards the bar and moving the attachment back and forth with the crop slide, all at the same time, eventually the attachment will stop moving back and forth, you will then be in perfect alignment with your spindle centre. After all of the above, adjusted the tool radius and you will have perfect spheres everytime. It sounds a lot of hard work, but believe me, once you have the attachment on the lathe, it'll take less than a minute to set up!

@mariellecb1 Жыл бұрын

Very cool tool - thanks for sharing this!

@jamesrowlands8971 Жыл бұрын

Chamfers are what separate us from the animals. Subscribed.

@donaldsutherland244 Жыл бұрын

I bought both the large and small Rose-Indexes! (Very well made by the way.) -and now I too want to make a chess set! Thank you Quinn!!!

@garethmcmahon9769 Жыл бұрын

Looks mental Quinn, love you and your channel....

@garethmcmahon9769 Жыл бұрын

PS tangent ,can you recommend cobalt drill bits please nothing larger than 13mm ? Thanks.

@jollygreengiant Жыл бұрын

Looks so neat. Maybe add a spring to provide the tool pressure for template following, and then all you need to do is move the carriage back and forth whilst advancing the slide?

@beeman1885 Жыл бұрын

Great video. I really enjoyed it.

@Larry537 Жыл бұрын

Very similar to a wood lathe tracer. Nicely done.

@utidjian Жыл бұрын

For setting the radius... just make a pin that is the same diameter as the pivot pin but much taller, a little bit taller than the baseplate-to-tool tip. Set the radius between the pin and the tool tip with calipers, gage blocks/pieces, inside mic, or whatever. Remember to account for the radius of the pin. Might want to attach the radius setting pin to that table with a screw from underneath to make it extra snug. Depending on the kind of work you do you could keep itmounted most of the time on the bottom left or bottom right corner. Always ready but out of the way. The setting pin would work for both convex and concave radii. Similarly the setting pin would also be useful for setting the pivot pin in the correct location under the work. Now that I have mentioned it... I am kinda surprised that it isn't part of the kit already! Also since I think you have a DRO on that lathe it makes it even easier (but easy to set either way.) Hope that helps.

@jimurrata6785 Жыл бұрын

I think you mean Portrait or Landscape. 😄 Chris (Clickspring) seems to freehand all kind of complex curves on his lathe. 🤔 I guess we can't all attain his god-like turning abilities...

@monkey_breath Жыл бұрын

looks like an amazing tool!!!! i bet you could make some kind of pointer that registers in the plate below to get the radius tool lined up easier, just a thought.

@umahunter Жыл бұрын

Really cool I've been eyeing one of those for awhile the other cool thing of theirs I've been looking at is their endmill sharpening kit they have some pretty cool stuff 👍👍👍

@MrJoeGarner Жыл бұрын

This is an amazing little set up, glad I don't need to mess with it. Rock on Quinn! 22:00 "Theoretically if some had a shower knob from a previous project?"

@joshclark44 Жыл бұрын

That is super cool! Way better than my step turning adjustment tool idea 😄 now you gotta make a bracket to hold a piece like the shower knob in the other direction but make it easier to adjust the height of the template because I bet that's going to be really hard to get just right, especially if you have to do a full radius on the end!