Turning an Artisan Inlay Comfort Ring Core

Рет қаралды 107,817

4 жыл бұрын

Make a custom ring with an Inlay Comfort Ring Core
Shop now - www.woodturnerscatalog.com/p/...
Inlay Comfort Ring Cores come with a channel already machined into the core. No ring blank required - simply fill with inlay of your choice. The sides of the ring are beveled to enhance the beauty of the inlay. Made from solid stainless steel, the Comfort Ring is comfortable to wear and ready for everyday tasks.
- PRODUCTS USED -
Artisan Inlay Comfort Ring Core - www.woodturnerscatalog.com/p/...
Artisan Crushed Opal Inlay - www.woodturnerscatalog.com/p/...
Carbide Insert Tool with Square Cutter - www.woodturnerscatalog.com/t/...
Ring Turning Chuck - www.woodturnerscatalog.com/p/...
Sandpaper - www.woodturnerscatalog.com/t/...
Dr. Kirk's Scratch Freee - www.woodturnerscatalog.com/p/...
Dr. Kirk's Micro Magic - www.woodturnerscatalog.com/p/...
Acrylic Buffing Mandrel - www.woodturnerscatalog.com/p/...
- LINKS AND RESOURCES -
CRAFT SUPPLIES USA - The Woodturners Catalog
Since 1982, woodturners have trusted Craft Supplies USA to provide them with the finest woodturning tools and supplies. We pride ourselves on providing exceptional customer service and stand behind the products we sell. Our goal at Craft Supplies USA is simple: to make doing business with us so enjoyable that you look forward to doing business with us again.
Phone: 1-800-551-8876
Website: www.woodturnerscatalog.com
Address: 1287 E. 1120 S. Provo, UT 84606
Email: service@woodturnerscatalog.com
Join our Email list for promotions, new products and more:
www.woodturnerscatalog.com/Em...
Download Allan Batty's Woodturning Notes (Free):
blog.woodturnerscatalog.com/20...
Visit our Woodturning Blog for how-to's and more:
blog.woodturnerscatalog.com?
View our Digital Catalog:
content.yudu.com/web/33r4n/0A3...
Subscribe to Craft Supplies USA:
kzfaq.info...
- SOCIAL MEDIA -
Facebook - / craftsuppliesusa
Instagram - / craftsuppliesusa
Pinterest - / woodturnerscat
Twitter - / woodturnerscat
#woodturning #woodturnerscatalog

Пікірлер: 67

@larmesdepoissongoldsmith2713 4 жыл бұрын

High technology and nice products! I'm looking forward to it! from Japan

@michaeldequatro1012 Жыл бұрын

Thank you so much for this video. I made 2 rings and they came out great. Thanks again.

@CraftSuppliesUSA Жыл бұрын

That is great to hear! Have fun turning!

@tobeornott1684 4 жыл бұрын

Thanks this was really helpful I might try one!

@xaralamboslag7152 4 жыл бұрын

Super cool and good 🥇🥇🥇👍🏼👍🏼👍🏼

@antoniocera8550 4 жыл бұрын

Complimenti ottimo tutorial

@jimpeterson3633 4 жыл бұрын

Nice video

@GerhardChristmann 4 жыл бұрын

Hi Mike, fill the Inlay in a empty (new/clean) long nose CA Glue Bottle and you can drop corn by corn of inlay. best regards from Germany Gerhard (former woodturning supply dealer, now retired) ,-))

@CraftSuppliesUSA 4 жыл бұрын

Thanks for the tip!

@dreamlookautodetailingauto3353 Жыл бұрын

You just inspired me to do 👍😎

@CraftSuppliesUSA Жыл бұрын

Glad you liked it!

@sticustom Жыл бұрын

If only I had a lathe.

@jordypendjol1551 2 жыл бұрын

What rpm do you use in different stages?

@gaowoodlab 4 жыл бұрын

nice working，great。l'm thinking how to make the ring in the movie of the lord of the rings.😅

@pauldejesus9644 Ай бұрын

will the carbide tool scratch the ring core

@m.m.m321. 3 жыл бұрын

تحية طيبة لك. عمل جيد

@MarcKrulewitch 4 ай бұрын

What is the buffing compound being used on the buffing wheel at the end? Can I buy it on your website? Thanks.

@chriswalters1014 4 жыл бұрын

Can you use a blank for this ring? I think u can

@twentytwosuperdave Жыл бұрын

Could you turn rings with the Apprentice 812 VS Mini Lathe?

@petsthphilly 2 жыл бұрын

A lot of times the glue comes out of the ring when I use the carbide tool. What can I do to stop this from happening? Thank you

@holzcustomwoodturning7076 Жыл бұрын

What they don't tell you is that the activator only dries the top surface of the glue, I learned this the hard way so make sure to wait at least 20 minutes before starting to turn your ring to let the glue fully set all the way through

@deskmat9874 10 ай бұрын

I think its better to put in activator first then use thin glue when the inlay is inside

@simonleyman-hobbs3333 Жыл бұрын

Anyone recommend a suitable CA glue and activator in the UK? Many thanks

@chrisfalcon9804 5 ай бұрын

there is an easier way! I will be trying soon!

@shanecason4620 2 жыл бұрын

How much would you sell rings like these

@dominomoody7712 3 жыл бұрын

when i use the activator the CA glue turns white. How can I keep from doing this?

@pteropedro 4 жыл бұрын

hey man, do you sell the stuff for the craft of the rings? can you shipp to brasil? great job!

@albertobugarinipuga8462 3 жыл бұрын

Hello sir, could you tell me where I can buy the earrings, for the rings ... excellent your work, congratulations

@CraftSuppliesUSA 3 жыл бұрын

Here is a link to the ring cores: www.woodturnerscatalog.com/p/58/7264/artisan-Inlay-Comfort-Ring-Core

@jameelmujhal3302 Жыл бұрын

Tell me about ca glue

@jwh475ezc Жыл бұрын

Isn't cyanoacrylate not recommended for silver, or metals in generl.

@LarryDMitchell 3 жыл бұрын

Mike, my first inlay ring resulted in cloudy white CA on parts of the inlay. How do I avoid this?

@The_Conqueeftador 2 жыл бұрын

Same. The activator can cause cloudyness. I can never get any CA finish as beautiful as these youtube videos.

@jrobins3547 2 жыл бұрын

Yeah it did the same to me.

@danlundquist2130 10 ай бұрын

Does the ring scratch with the carbide tool if so does it polish out

@CraftSuppliesUSA 9 ай бұрын

Carbide can scratch the core, but can be easily polished out.

@curtishadley4114 2 жыл бұрын

Could an inlay ring blank be filled with sawdust from a special piece of wood to the recipient?

@cliffburlew9209 9 ай бұрын

Yes I do that a lot

@edmelzark1069 10 ай бұрын

will the white from the spray turn out? on the lathe.

@CraftSuppliesUSA 9 ай бұрын

Most of the time it does. If it doesn't, I recommend using an Exacto knife to cut out the white areas.

@daughterinchrist3877 3 жыл бұрын

can I request a ring?

@edmelzark1069 Жыл бұрын

what happens if you hit the core when cutting down the inlay ofhow to miss the core????? Thank you Ed

@CraftSuppliesUSA Жыл бұрын

If you hit the core it will scratch the core. However you can always polish that surface if needed. You can use a narrow parting tool to cut the material down without hitting the sides of the core.

@samschmitt6897 2 жыл бұрын

Where can I get the stuff you used to make ring

@CraftSuppliesUSA 2 жыл бұрын

www.woodturnerscatalog.com/Sales/52/Ring-Turning

@lonnieshrum4998 Жыл бұрын

Like to know where you purchase the ring check looked on your channel Supply Channel USA doesn't have one.

@CraftSuppliesUSA Жыл бұрын

www.woodturnerscatalog.com/Sales/52/Ring-Turning

@twinlukers 4 жыл бұрын

I plan on making my first inlay ring with UV resin. Do you have any tips? Please message me. Thanks very nice video!!

@carolstewart1704 2 жыл бұрын

This is the info I am looking for as well.

@Fuster1975 4 жыл бұрын

I love your products, but I think I have run into a problem. I followed the instructions as on the video, from the sharpie to the products; I ordered them all from Craft Supplies USA. I made rings for my wife and I and they looked pretty good for the first time. Now, the first thing is something that I thought about from the beginning, what is there for the CA to grab ahold of? Answer is nothing. This is where I think part of the problem comes from. So here is what happened. I was typing earlier today and happen to look at my finger. My ring was missing a huge chunk out of it. I wear a size 10 and the channel is relatively deep and wide. When I touched the rest of the inlay it began to come off the ring as if nothing. Even the black coating from the shapie was gone. Most of the ring is smooth as if nothing was ever on it, there was no adhesion to the ring itself. And my next question is, isn't CA relatively brittle to begin with? I bought a few sizes to try, and see how they sold. However, without a reliable bond and ensuring that the ring isn't going to break with a slight bump, I cannot sell these at all. Your suggestion on how to fix this is greatly appreciated.

@leftmono1016 4 жыл бұрын

Raul Fuster - I've only just started inlay rings and have had the opposite problem to you - I used a cheap turquoise inlay, didn't care for it, and it was incredible tough to break out. A lot of videos show the blank being roughed up with a needle file in order to give the CA something to grab on to. That also helps remove any contamination on the surface of the blank.

@trainwon5699 4 жыл бұрын

Raul Fuster I would rough up the surface with sand paper then clean it with denatured alcohol then use the marker. Hope this helps

@Conn0ro 2 жыл бұрын

How come the glue becomes cloudy?

@CraftSuppliesUSA 2 жыл бұрын

Typically the clouding comes when applying too much activator. I find it helps to spray the activator from further away (8-10 inches from the piece) and to use an aerosol can instead of a pump sprayer . Activating the glue too fast creates too much heat which leads to the clouding effect. Hope this helps! If you want more specific help, call our tech support at 1-800-551-8876

@user-qx5ss7xd1j 2 жыл бұрын

ألقَرٍنٌبُعٍ . مَعُي و عًنْدي قال الله تعالى(وَقُلْ جَاءَ الْحَقُّ وَزَهَقَ الْبَاطِلُ ۚ إِنَّ الْبَاطِلَ كَانَ زَهُوقًا).الْآيَة جَاءَ.أعُمْلُوَا أرَأء.وألحَمْدِلله وَألشُكْر لِلَّه.

@grantpigott107 2 жыл бұрын

Very stupid question, buy is the lathe a wood lathe or metal lathe?

@CraftSuppliesUSA 2 жыл бұрын

Not a stupid question at all! It is a wood lathe - www.woodturnerscatalog.com/p/216/7024/powermatic-3520C-Lathe

@ferdinandmishaelchinsandoy764 Жыл бұрын

can i have one of this i give to my wife

@mikeyduke10 7 ай бұрын

I got half way through before I thought to myself... why would someone who's buying a ring blank have a lathe and carbide tooling... surely if they had a lathe it would be cheaper to just make your own ring blanks

@ParkerDesigns05 5 ай бұрын

It may be cheaper but you have to think about time consumption. Spending a couple of hours just to make an identical copy of something you can buy for £8 is a waste of time, especially when you’re selling your rings!

@mikeyduke10 5 ай бұрын

@@ParkerDesigns05 takes a lot less craftsman ship though

@ParkerDesigns05 5 ай бұрын

@@mikeyduke10 as someone who makes rings themselves I can see what you’re getting at and I agree, however from a business point of view there’s really no point. It’s not like you’re trying to prove that you’re amazing at your craft, most people (especially the customers) only care about the finished product, not about if you’ve made the ring blank or not

@SkyRaidis 2 жыл бұрын

Jesus loves you and died on a cross and rose three days later taking our place and paying our debt (for the wages of sin is death) so you can have eternal life and be forgiven of sin if you repent and pick up your cross and follow him daily

@hirenrajput4062 2 жыл бұрын

Kalor

@richedgar3322 Жыл бұрын

keep your jesusfreak stuff to yourself