Turning with a CNC Mill - From CAD to cutting

No video

Turning with a CNC Mill - From CAD to cutting

Рет қаралды 3,180

Күн бұрын

Hello and welcome to Dragonwrath Innovations!
See my work at
www.dragonwrath...
I made this video to demonstrate my method of using a CNC mill to execute lathe operations. Enjoy!
My mill is a Bridgeport Torq-Cut 22 running a Centroid All-in -DC control.
Design and tool path created using Autodesk® Fusion 360™ software.
Music is courtesy of the Free Music Archive

Пікірлер: 4

@jeffborg3356 6 жыл бұрын

Really cool video. Would love to see an extended run through of your cam work and how you set up work offsets for this job. Well done.

@22BOZIDAR 7 жыл бұрын

thank you posting the video. What post processor are you using? I have been trying to do this. In the code fusion 360 creates, the x axis motion is always double of what it should be. not sure why that is. The simulation in 360 is correct though.

@dragonwrathinnovations7780 7 жыл бұрын

Very good question, wasn't sure if I had mentioned in videos. In 360 select the post processor you want to use and click open config. control - F to 'find' and look for 'xformat'. There will be a scale: value, it is likely set to 2 in your case. Set it to 1 and you should be good to go! Thanks for watching :)

@ajohansson1981 7 жыл бұрын

Thank you for being open about the details, this video was inspiring. How did you hold the part up in the spindle?