Thanks!! No blabla and talking about your life or pet or wive, just what is important for the task :) There is too many bad How Tos on youtube. glad I found your video!

Interesting to see how you keep the model in the water. Your results speak for themselves - well done!

Thanks for this, very helpful. I'm building my first motorcycle kit, very different to my usual Sci-Fi or WW2 subjects!

Great job

Amazing work!

Excellent job!!

Will this work well for lexan car bodies and PETG spastic scratches too?

Do you secure surface somehow after polishing? How about to use at the very end tamiya wax ? What kind of clear coat do you use?

What is your sandpaper selection that you use to polish unpainted plastic to make it shine?

Easy simple video without the talking. Thank you

Nice!

What happens if you go straight doing the polishing compound? Will it still have close result?

Silly question but didn't it wear through as a small pite of the number one seems to have worn away after polishing ...

Awesome, thanks for this, I had been looking for a good mirror finish tutorial and this is great. Quick question, do you wash off the remaining compound after you're done polishing one step, before moving onto the next level of compound? like coarse > wash off remainder > fine > wash off remainder > finish > wash off remainder? or is it all in succession?

Hi :D do you wash the piece after polishing? What do you recommend after doing the polishing?

Hi mate! great tutorial and beautiful results. I'm in the process of learning this technique my self. but in my case, it always leave scratches in my models. I do the same process and was wondering what clear coat are you using?. My last build i tried mr.color ultra clear gloss uv cut. let it cure for about a week and when i went on to sanding, it jsut leaves scratches and the compunds where not able to remove the scratches either. Thanks in advance, cheers!

Very helpful video, could you explain what the polishing compound is and what it does along with if its necessary to sand it and can I use a polishing sponge on it. Also how does sanding and polishing not damage the decals and do i do all of this polishing on top of a clear coat of X-22.

Do we need all three of those or only one?

How many coats of lacquer did you give it? is it tamiya or enamel water lacquer

thanks for the video. after you painted the white and red, u didn't do any corrections at that moment on the colored paint itself right? u just apply the decals. then clearcoat 4-5 layers, and then do this process?

Thanks for sharing the excellent tips. In this video, how many clear coats have you applied on the model? What brand of the gloss paint do you use, Gunze(Gx-100) or Tamiya? Thanks

Do you sanding every layer for your surface paint or only on your clear coating?

excellent work!! i am a beginner modelist, the steps are: sanding>primer>sanding>colour>varnish>then the three tamiya finishes..right? thank you!

Great job...what do you use to clear coat / top coat?

Can i use same method on clear color gunpla to make it more shiny?

Would be alright if I only use one polishing compound? Will it give the model kit a mirror-ish shine?

Would it be possible to achieve the same effect without polishing compound and by using only sandpaper up to 10000 grit gradually?

Thank you for the tutorial. How many kits do you generally get out of a set of sponges?

Hello. What if I will use only one type of compound? for example only "Fine"

I have orange peel in the paint, so do i sand the paint and then clear coat, or do i just clear coat and then sand it 🙂

I was wondering is that only applicable withtamoya paint only or it works with any paint

Is the godhand sanding stick the same as a sanding sponge? I cant figure out if they are different products or just a different name forbthe same thing

What I am most curious about is how are these stickers not affected when doing this operation? 1. painting the product 2. wet sanding 3. polishing 4. sticking the stickers. Do you mind if the order of operations is like this? I thought the stickers would be damaged during this process. They look fine 🙂

I guess the key is to have a decent amount of clear so you don’t get into the decals or paint. Not as difficult as I thought it would be. Just time consuming.

0:40 - I've heard different answers about what is the proper curing time. What works for you? Thanks and thanks for the video!

Are those decals?

why you sand 2000 4000 and 6000 after painting ?

Oooops, looks like the number 1 on the roof changed a bit

What if you dont have 6000 grit? 🥺

No doubt, a perfect surface, and a magnificent job. But in my opinion is it a work of an armchair enthusiast, who has never seen a rally car in real life. No rallycar at all, has a glossy surface like this. I have decorated many rally and racing cars in 1:1. and it is far from what you see in real life. Impressive job, but I am sorry to comment negative. This kind of surface belongs to a Hot Rod or a Street Rod with a "mile-deep" varnish.