This video was just missing the details! Here’s some tips just from my experience: 1) Make sure front side that says “Huffy” on the side is facing forward before you line up the fender braces👌🏼 If not, you will be stuck on why the fender braces aren’t aligning properly. 2) Don’t screw in the 1st screw in the basket all the way, only half. So you can fit the basket support legs in the middle correctly before you insert the 2nd screw. Then tighten both all the way evenly. 3) The middle bolt from the hand bars: (The middle bar from the handle bar should be facing you) To unlock,unscrew towards the left. To lock, screw towards the right 4) The seat will tighten when you continue to screw the bolts all the way 5) just keep turning the lever clockwise a couple times until the seat tightens. It took me more than 5x to get it right. Hope this helps✨

I can’t believe this thing came without the Allen wrench

This is the hardest thing i ever had to assemble in my life, & I’m usually good at assembling things.

For anyone saying that the seat won’t tighten, keep at those bolts with your wrench until you can’t go anymore. I thought that something was defective because my seat just wouldn’t tighten, and the pole would just fall out, but I just persisted and kept at it with the wrench until it wouldn’t tighten anymore and then it stayed in place and wouldn’t budge even a little

Very glad this video was available as for some reason I lost my instruction manual after just getting the bike.

This bike is a pain in the ass and not easy to assemble. The lady in this video, idk her name it’s probably Cassandra, lied. It’s not that easy.

I assembled it by myself, I used this video it wasn't too bad, to be my first time doing this... just with the seat, I had to take it to the byke shop and they helped me to adjust it good.

I saw this video and thought, "Hey, that looks easy and very doable!" I saw the comments and ignored them, I didn't think this bike could possibly be that frustrating to assemble. I thought that I couldn't possibly struggle like everyone else. Just 2 hours later and this bike has made me cry, but at least it's assembled to what I hope is safe to ride. I knew I shouldn't have trusted someone with such highly arched eyebrows

It’s been 30 minutes and I’m still stuck on 0:46

Thank you! This video helped me put my daughters bike together with easy. I used a 6in adjustable wrench.

Thanks for this video it helped putting my bike together a lot!

Watching this video helped me and my chikd out alot we rolling thanks Ms Lady🚴‍♀️🚴‍♀️🚴‍♀️

I had the same seat tightening problem most of you guys have. I fixed it though. If your gears on the seat fell off make sure the rod is aligned with the gears the rods on the bottom of the seat. Also, you have to keep tightening.

Thank you. The video was very helpful and we'll explained. Got it together for my daughter.

Awesome instructions, thank goodness for KZfaq

I'm so excited to get my Nell lusso bike!! I been waiting for a week now I'm so excited

Thank you so much for this very helpful instructional video! You saved me!!!

my dad and i got into huge arguments because of this bike..

Took me about 2.5 hours to assemble by myself. The front and back bender were rubbing against the tire so I needed assistance from someone else in order to fix the fender. Bike is all built and ready to ride! I would say this is a 6.5/10 difficulty to build

Very useful video. Thank you so much 🙏

I'm having the same seat issues, still havent figured it out. I do have a question tho. Is it normal for the tires to be completely flat? I wasnt expecting that. Now I have to go fill the tires to even see if I put it together correctly.

I have this one!!!!! It’s the best!

How do you make the center clamp for the handlebars tight enough? I went to ride and my weight pushed the handlebars downward, nearly causing me to faceplant! I tightened the nut as far as it would go and tested it like in the video.

Ty, I bought my baby a cruiser bike. I had no idea to flip the handle bars.

The most garbage manual I have ever seen for any unassembled product I have purchased.

I just bought a cruiser and the upper bracket for the basket is backwards and im unable to loosen the frame.to spin it around. Any tips?

Mine came without a second bolt for the fender brace ! Useless until I get a replacement piece.

Are the fenders a necessary part of the frame? Like, if I wanna install brakes and the fender is in the way, can I just remove the fender??

how do i find replacement screws for the basket. My recently fell off

Is there any way to get the black piece of the basket from a shop? I lost mine, and now I don’t have a basket..

Does anyone know what type of bolts and screws are used for the 2 rods that are holding up the basket? I keep trying to find out because I need replacement parts for it. I can't find anything for it and Huffy's website is being a tad difficult!

Finding some of the assembly of the Huffy Marietta frustrating. The seat post went into the frame of the bicycle and is firmly stuck in there. It won't budge and can't be removed. Now what?

What size is the peddle thread for a 26 in nel lusso?

my cruiser bike, is noisy have a sounds nose if it is the seat, is it new one?

Great video thank you.

So the back bracket on my bike is backwards and i dont know what to do, help! Also I’m dont know how to assemble the part where the bike seat connects to the pole and I’m getting pretty upset over this. So please help

How do I keep the actual seat from twisting around and falling forward when the bolts are as tight as can be?

Thank you for putting this video because I got the same thing I liked and subscribed

I took my 02:30 hours to do it. However, front tier still raping to fork and fender, I don' t know what to do.

I’m missing the wire fork for the basket? Shipped from Walmart

I just got this bike home, so excited, but there is NO WAY the front fender will fit this bike with out the tire rubbing the tire! Called customer service! They have Never had this issue, Sure they haven't, they will send a new one in 7 to 10 days! Incredible!!!

One more tip guys, don't clamp the seat tube when the sit post is at the narrow section. If you want to set the seat as low as possible, make sure there is still some of the thicker part of the seat post at the clamp area when you tighten the clamp. Also, I don't think the weldings of the frame of the bike will be safe for vigorous riding, but that's not the intended purpose of this bike. Just some casual stroll around town/college at slow speeds will do fine.

If you don’t have a wrench will pliers work

Before you assemble anything…. Make sure the upper bracket that is attached to the steering portion of the front wheel and connects to the basket is aligned with the wheel. I just spent 2+ hours assembling until I got to attaching the basket and noticed the upper bracket was leaning to the left. I tried to unscrew and straighten but that is a part that was sent like that so I had to use my warranty. Good news is they are sending a new bike 👍🏼 Here’s to hoping it’s actually straight 🤞🏼

Mine is really hard to pedal, any advise ?

My front tire continues to rub fender. The tire is bent, we can see it is. What would anyone do?

Can’t anybody help me? I purchased this bike and assembled it myself. The only thing it was missing/ wasn’t included was the cup holder bolt. Was wondering if anybody has the measurements on the bolt before I head to the local hardware store.

Perfect, thanks.

The front wheel doesn't rotate freely, it raps into the fork and the fender. What should I do? She didn't' mention the solution. Please help.

Tomorrow should be an interesting day since ill be helping building this

My seat came with the parts not connected… how do i do it?

What size is the seat post ? Anyone know?

How do I put this bike on a bike rack

The video was excellent. I followed all the steps and the bike works perfectly. Additional tools which will make the assembly easier - small vice-grip pliers, cordless screwdriver, pedal wrench, 15mm socket. So far the bike seems to be excellent quality.

wish this had torque specs. I always feel more comfortable using torque specs lol.

I recommend using a combination wrench or similar rather than the adjustable wrench

What size is the chain

the fender keeps rubbing the tire and although i dearly wish to fix it without busting out the toolbox i don’t think that’s on a happen so anyone know any fixes?

Solo quiero saber más información de la bicicleta ya que la he buscado en Google y nada

I got the baby blue huffy Lel nesso with a basket a cup and phone holder

My front fender keeps touching the front tire. Any advice how to fix this?

Anyone have wobbly wheels and know how to fix it? I don’t wanna return it

Is it normal that wen I sit on my bike that the back tie look flat but it not

Beautiful bike but Huffy should have included a rubber mallet and some touch up paint. I envision the American Tourister gorilla tossing the box around in the warehouse. The quick release lever doesn't keep the seat secure no matter how tight you make it.

what about the brake adjustments?????????????????????????????????

the handle bar keeps moving even when i tighten it all the way till i cant. and the seat post got stuck in the frame and i can’t get it out. this bike is a nightmare

The seat wont tighten

ME AND MY FAMILY HAVE BEEN AT THIS DAMN BIKE SEAT FOR HOURS AND HOURS AND DAYS AND IT WON'T TIGHTEN. HELP. WHAT DO WE DO. NO MATTER WHAT THE SEAT WILL NOT TIGHTEN OR KEEP FROM MOVING.

I'm buying this bike for myself online and was gonna pay for it to be assembled but I think I can build it myself and save a few dollars

So my wheel not rotating freely what to do next

Do they come with brakes? Mine didn't have brakes.

So what happens if after putting the basket on the front fender does touch the wheel when spinning? I can’t figure out where I went wrong

I’m not even kidding. Took me three hours to get all this done, and the seat is still sliding. Oh well, I’m just gonna get that later. Lol

I dropped the bike piece in the frame. Does anyone know how to get it out 😓😭

I misplaced one of the bolts for the mounting braces and now I am low key freaking out.

How long do I have to wait to receive my bike?????

When you buy the bike do you have to assemble it yourself or does it come assembled?

My seat won’t stop swiveling. Any suggestions

is anyone’s tire keep going flat I just built it and the next day it’s already flat?

Having issues assembling the seat. The bar seems like it is the wrong size for the bike

People who have never owned and maintained a single speed cruiser bike, and can't follow assembly instructions, should have the bike assembled by Walmart or a bicycle shop. The seat needs to be tightened with parts aligned properly using plenty of force on the wrench to tighten seat securely to the post. The quick release seat post clamp needs to be adjusted so that it takes a LOT of force to move the lever to the locked position and hold the seat post securely. The basket brace has to have the bottom part in the proper direction to clear the bottom of the fork. My bike apparently had no grease in fork bearings, front wheel bearings and bottom bracket. I took my bike to a local bike shop for a "safety inspection" which includes lubrication and adjustment of wheels, fork bearings and "bottom bracket" (pedal/sprocket assembly) . Otherwise I would have had to buy special thin wrenches to disassemble wheel bearings etc., grease them and adjust them myself. Bike shop charges $35. BTW, only inflate the tires to 20 psi which is sufficient for a smooth ride, ignore the 40 psi rating on side of tire. Make sure tire edge bead is secure in wheel rim all around the tire before inflating tire. I think this bike will be as good as any similar bike if assembled, lubricated and adjusted properly. Correction, make sure tires are properly held by rim all around , inflate to 35 psi as advised by my bike shop.

Hola yo cuento con una bicicleta Huffy Cape Cod men 39

Not me watching this video religiously BC my bike is arriving soon 👁👄👁

Video doesn't show rear wheel assembly and adjustment in order to tighten chain on sprocket.

Started around 8:30 it is now 10:55 and I still need to tighten the parts that need the Allen wrench, and I need to pump up my tires, all and all it was alright, idk if this helps anyone but make sure that the bike wheel is the right way, I’m not sure if mine is or if that’s important but just make sure, and if the wheel is rubbing against the front fender it’s not rocket science, just push the fender up a little higher and bolt it down , I was looking at it like why is it touching the wheel, and realized I bolted it too high on the fender, it should look like this |.| , not like this |*|

Just buy it pre assembled by Walmart

Is the bike have brake?

I got my bike yesterday and my sister moved the seat:((

If you don't want a migraine and yo spend 6 hours trying to assemble a bike, that still ends up unable to be assembled properly then do not bother spending your money on this bike. The least they could have done was included the L bar tools to assemble the handle bars properly. I ended up with a seat bar stuck inside the bike chamber , that I can not get out, with no seat able to be attached to it and handle bars I can not tighten and assemble due to not having a proper L bar wrench and the directions still being unclear. I don't even know If I would be able to figure out how to assemble the handle bars, even If I had the L bar wrench. The handlebars also had a tight plastic wrap around the bottom bar, that I could not pull off and had to spend 20 mins trying to cut through. I contacted a local bike shop to see if they could put the seat and handlebars on the bike for me and they want to charge me $75m so spend your money wisely and buy a bike that is either assembled or very easy to assemble, that comes with the tools you need and clear concise directions. So disappointing !

My handle bars won’t tighten to the wheel?.? What am I doing wrong?

Can I add my own rear hand brakes to the bike? I can't pedal backwards to stop lmao I GOT THE BIKE! TUTORIAL HELPED BUT YOU NEED LIKE 2 PEOPLE IF YOU AREN'T STRONG (LIKE ME) ALSO KEEP TWISTING THE NUTS FOR THE SEATS UNTIL YOU CAN'T NO MORE.

I'm missing 2 bolts for the basket .

The handlebars wont stay in place, no matter how tight I make them.

Where's the grease in any of the parts that should have them? The seatpost will soon get seized in the seat tube due to zero grease, the quill stem will soon not be able to move over time since there isn't any grease in there and it'll shave off alot of metal! The threads of the axel should be also be greased so you can get it as tight as possible without over tightening it! The pedal threads should also be greased otherwise over time it'll get stuck in there! The front wheel was so out of true when it was being spun, so that should also get trued with a spoke tool💯. I'm also going to assume the cups in the one piece bottom bracket shell were also not greased. This bike isn't gonna wistand so well if taken to a beach or even left outside in rain for more than a day! This bike could be rather good if all those things were done but since it isn't. Well it's not gonna be so good, want my advice when putting together a bike from outside the box? GREASE THE PARTS THAT NEED IT!

The fender braces do not line up ! At all. What is this!!!

The seat won't tighten!!!!!!! simply either the pole is too narrow or the tightening part is too big or too stiff. Anyway, the seat is spinning on top of the pole.

"And that's that" my @$$!!! One of the most difficult things I have ever assembled. Won't ever make that mistake again.

(1940s radio voice) so easy a woman can do it!

Jesus Christ. The seat rod would NOT stop spinning . Thankfully my fiancé is strong enough to bend the metal & make it tight. But my goodness....

the handle does not fit in the bike