Tutorial Inventor - 016 REAL THREADS

No video

Tutorial Inventor - 016 REAL THREADS

Рет қаралды 4,402

Күн бұрын

Firstly, the recommendation is to take a view to Tutorial Inventor - 001 and -002 and then to this one.
Every tutorial brings new abilities.
You can slow the film on KZfaq by using the Settings (bottom right), selecting Normal, and choosing a subunitary Playback speed. If you misunderstand what I say by voice, then click on the CC and activate the English auto-generated subtitling
============================
IMPORTANT (English) - If you want the drawings for the parts in my collection of 100 parts you can buy the book ALBUM (4 euros) from Google Play by accessing the below link. Drawings are a universal language.
IMPORTANT (Romanian) - Oriunde s-ar afla în lume, vorbitorii de limba română pot cumpăra foarte ușor și la un preț mic cărțile mele în format PDF de aici: play.google.co...
În principiu este bine să se orienteze spre cărțile „MANUALUL (Inventor - 658 pag.)”, „ÎNDRUMARUL (Inventor - 374 pag.)” și „ALBUMUL (Orice CAD - 208 pag.)”
============================
You can read more about me here: grabcad.com/co...
If you click to SUBSCRIBE you will be immediately advised when a new Tutorial is released!
Download assets from www.fastgrup.r...

Пікірлер: 28

@danielvalbuenahernando2187 Жыл бұрын

Master Class ! Thank you And believe me me you have a GREAT Audience! Keep it up!

@prof-stancescu Жыл бұрын

This is the fuel that keeps me going!

@andreazigiotto3764 Жыл бұрын

Un altro esercizio fatto Professore! Grazie!!

@prof-stancescu Жыл бұрын

Si, un altro esercizio per voi...

@kostasp6460 Жыл бұрын

thank you professor!very helpfull tutorial!

@prof-stancescu Жыл бұрын

Glad it was helpful!

@bimbarofuturo5713 3 жыл бұрын

multumesc pentru lectie, domule professor. 👍

@prof-stancescu 3 жыл бұрын

Vă mulțumesc și eu pentru aprecieri!

@mountainsprings3303 4 жыл бұрын

Excellent tutorial, thanks for your well laid out presentation.

@prof-stancescu 4 жыл бұрын

Glad you enjoyed it! If you take a closer look I try my best to laid out all presentations in my tutorials.

@basilalias6206 3 жыл бұрын

Great video!! Lerning : Coil option Picking top or bottom end of feature to start a thread

@prof-stancescu 3 жыл бұрын

Good luck forward!

@plcpro7543 3 жыл бұрын

Thank you so much, Professor. Excellent! I will watch much more of your videos.

@prof-stancescu 3 жыл бұрын

Please do!

@eslamyosri8927 Жыл бұрын

U are super hero professor

@prof-stancescu Жыл бұрын

Thank you, my friend!

@MercedesBenzS600LAMG 3 жыл бұрын

Awesome ! and thank you for another great Tutorials :)

@prof-stancescu 3 жыл бұрын

My pleasure!

@alexey0290 3 жыл бұрын

Фаску на головке болта удобнее делать инструментом Выдавливание (Extrude)-Пересечение (Intersect), Угол (Angle) 60deg. В качестве эскиза окружность диаметром 36 мм.

@prof-stancescu 3 жыл бұрын

(It is more convenient to chamfer the bolt head with the Extrude-Intersect tool, Angle 60deg. As a sketch, a circle with a diameter of 36 mm) You mean that we can use an Extrusion/Intersect with a 60deg Taper angle. Any model can be made in many ways. Thank you, I'll use this way in my next appropriate model.

@Paata1992 3 жыл бұрын

Hello, I have planned to view all your tutorials. It would be great if you can make a tutorial about making geodesic dome. (And some Platonic)

@prof-stancescu 3 жыл бұрын

Great suggestion! I'll think about!

@ahmedhasanen672 2 жыл бұрын

i am here , i wish u read this , really thank you so much, have a question ; what is better for structure analysis as i use the library or draw with coil th volume was less than than the thread so the structure calculation will be different as safe or not .

@prof-stancescu 2 жыл бұрын

It depends of how precise you want the result to be.

@georgepavi5807 4 жыл бұрын

Mr professor, the screw from Inventor library "iso 4016" used "thread" command instead of a "revolve", so it's not a real screw. Is it ok to use it like this in projects?

@prof-stancescu 4 жыл бұрын

Yes, in the Content Center they use the command Thread and obtain our first solution (the thread is a texture, not a real coil). If you want, you can create your own library with real screws. Good luck!