No video
Tutorial of UNI FAN TL & TL LCD L-Connect 3 Software
Рет қаралды 19,087
6 ай бұрынLearn more ▶
UNI FAN TL lian-li.com/pr...
UNI FAN TL LCD lian-li.com/pr...
L-Connect 3 lian-li.com/l-...
Tutorial of UNI FAN TL & TL LCD Installation ▶ • Tutorial of UNI FAN TL...
Important Restrictions for Installation of UNI FAN TL Series:
Regarding the TL Controller:
1. Each port supports a maximum of 10 TL fans or 3 TL LCD fans.
2. Each controller supports a maximum of 16 fans, including up to 7 TL LCD fans.
3. The 1st port does not support TL LCD fans.
4. It's necessary to connect the 9-PIN USB 2.0 port directly to the motherboard, a splitter is not recommended.
5. If needed, connecting 2 controllers is allowed, with both requiring a direct connection to the motherboard. Do not connect more than 12 TL LCD fans to the entire system. For additional USB-connected products, use the LIAN LI USB 2.0 1-to-3 (Type A male port) splitter.
6. Ensure to update the TL series controller firmware by referring to the update guide: drive.google.c...
Regarding TL fans:
1. When connecting 7 or more TL fans in a daisy chain, ensure RPM stability by using an additional power adapter connected to SATA. This adapter is exclusively included in the TL Triple pack.
Regarding TL LCD fans:
1. Connect the power cable to the pin side only.
2. Do not mount the LCD side facing inward to avoid potential damage to the screen.
3. Update the TL LCD firmware if encountering JPG file or rotation function memory issues; follow the guide: drive.google.c...
@carl6530 6 ай бұрын
You guys need to make a universal hub compatible for al, sl, tl fans and strimer. I have like 4 of your hubs taking space in the back of my PC lol
@thesagaofblitz 4 ай бұрын
this was my problem too. bought the TL120 LCD fans and made the mistake of buying the SL120's too and grabbed the galahad II which comes with infinity fans. all different controllers... had to uninstall and bring it all back to microcenter and get the same fans. was frustrating.
@cosmic5789 3 ай бұрын
@@thesagaofblitz if you can afford it, I’d recommend using only TL fans. They are the best cooling performance out of their lineup. My system is running 6 TLs and 4 TL LCDs
@m.u.4074 2 ай бұрын
@@cosmic5789 the tl's are ugly tho^^
@cosmic5789 2 ай бұрын
@@m.u.4074 I disagree personally. Choice is yours.
@cosmic5789 3 ай бұрын
The LCD fans are awesome, but there are some serious cpu usage issues when using them with L-Connect. If I set my 4 lcd fans to sensors, they take up 7% of my cpu and push my idle temps up to 50c at about 80-100 watts. Uninstalling L-connect entirely brings my idle temp back below 40c and under 50 watts
@cosmic5789 3 ай бұрын
I would love nothing more than to run these displaying my temps, but I’m not willing to sacrifice nearly 10% of my cpu performance and increase my idle power usage by double when doing so.
@LemonGrab37 5 сағат бұрын
Are there any plans to light the blades on this fan in the future?
@webklasor6761 6 ай бұрын
Lian Li fans, my friend bought it, it is not working, please fix the software problems, I gave up buying it because of this problem.
@GrafGDrakyla 2 ай бұрын
Купил ваши вентиляторы установил последнюю версию программы всё хорошо! Но есть проблема, программа опрашивает жёсткие диски каждые 10 секунд и они щелкают! Исправьте это
@Uncaged_Rage Ай бұрын
please help. I have version 1.6 installed for my TL LCD fans, and now the RGB doesnt work and the LIAN LI logo only shows up on the LCD screens
@brianbiscaro3453 4 ай бұрын
i cant even get L3 to show my pump or anything
@solaraustin3456 3 ай бұрын
How come even tho my fans plugged in and on I can’t see them on L connect?
@againstall4agsandtrans511 2 ай бұрын
Did u manage to solve this?
@solaraustin3456 2 ай бұрын
@@againstall4agsandtrans511 no sadly
@filippogardini2825 6 ай бұрын
Nice video, very helpful! I have a quick question though. Do i need to connect the 4 pin from the controller to cpu fan or chassis fan? Plugged in the controller I have 3 reverse LCD fans (1st port) placed on the radiator of the AIO, 3 tl reverse fans (2nd port), 4 tl standard (3rd port)
@reals763 10 күн бұрын
Can i use lian li hub usb 2.0 1 to 3 with it?
@elchancho8432 5 ай бұрын
To LCD fans aren’t even showing up on L Connect 3
@caranaworld 5 ай бұрын
have the exact same problem. cant do anthing with my new lcd fans because the so called 'update' is not there
@Razalghul777 5 ай бұрын
@@caranaworld I had that issue and realized I had it connected to slot 1 on the controller it needs to be 2,3 or 4 not one. That allowed me to install the update however it still doesnt work. LCD lights up with the logo but app doesnt recognize its there and I cannot do anything with it even the RGB lights dont go on
@DanielFernandez-gv6iy 4 ай бұрын
@@Razalghul777same. Was working just fine but then today 2 of my 3 have no RGB and aren’t detected in L3. But the other 3 I have on the bottom of my case work just fine. I don’t get it 😭
@netlurking Ай бұрын
From the looks of these comments I'm not the only one not able to do anything with the display of my TL fans and no support at all.. this video was posted 5 months ago not 5 years Lian Li... Should've just purchased different fans this brand is unbelievable
@iamFreddyP_ 6 ай бұрын
My L3 software shows that i have need to update the SL V2 Controller01 firmware. However after downloading it and try to update, I immediately get hit with a small alert that states "Not Supported" - what do i do now?
@manospanousos 6 ай бұрын
Same issue. Also all my fans are shown as 120mm in the software but I have 6 of 140mm and 1 of 120mm. Doesn't make sense.
@scottcerato4473 2 ай бұрын
Cpu usgae for this software is ridiculous . I have the gallahad II and 3 tl lcd fans with software it bumps idle cpu usuage up to 10% , making idle temps jump from mid 30's to low 40's . Surely theres a fix for this
@user-kz9ho2rh7s 6 ай бұрын
my animations going like 1 3 2 but not 123. Why?
@rayraycarter04 5 ай бұрын
Same have you found a fix?
@BWolf_ 5 ай бұрын
with all the love in my heart that software is the biggest piece of shit ever made. i can do everything but use the lcd screen on my fans... and they dont even reply to my emails. i hate not just one complaint about their bad programming skills
@marlitop30 3 ай бұрын
Hola, tengo el siguiente mensaje al intentar cargar una imagen o hacer un screen shot : Error Inesperado , el índice estaba fuera del intervalo, debe ser un valor no negativo e inferior al tamaño de la colección. Nombre del parametro : index
@tdub77 6 ай бұрын
Why wont my controllers update via the L3 software? keeps telling my I don't have internet???
@Brawlio13 6 ай бұрын
I'm having trouble trying to connect a single unifan tl lcd to the unifan sl controller. It just doesnt operate at all :/
@XzeferoxEX 6 ай бұрын
You need TL controller for TL-series fan (TL & TL-LCD). It won't work with SL, SL-Infinity, nor AL controller.
@Brawlio13 6 ай бұрын
@XzeferoxEX a whole controller for a single fan huh. Sounds like a bruh moment. Someone should make an adapter for single fans yah know?
@cloggyable 5 ай бұрын
@@XzeferoxEX Are you serious ? i have to get another controller for the 2 LCD fans i bought , on top of my 8 other SL infinity fans i have on my SL-INF controller, what are lian-li thinking ? holy fuck they are bad, to think i had to just suffer from their crappy l-connect software...*sigh*
@TheBonecrusherz 5 ай бұрын
@@cloggyableyes. It does say that the TL series is not compatible with SL or AL Series tho so it's your fault
@kaiisfrosty5901 10 күн бұрын
my fans don’t show up I’m confused
@james-1-1 6 ай бұрын
It simply does not work. I have 3 sets of these fans in a vision. Total of 8. All wired back to the hub not using port 1. All software up to date. Only 1 set shows the lcd option in l connect. This product looks great but the software is seriously lacking.
@austomatic6546 6 ай бұрын
cant use port 1
@james-1-1 6 ай бұрын
@@austomatic6546 as above “not using port 1”
@againstall4agsandtrans511 2 ай бұрын
App only detecting 2 out of 3 fans. If your thinking if buying these. Dont bother. There is 0 support or software updates
@Glad1atorFromRussia 5 ай бұрын
Is it work with lancool iii stock coolers?
@drexter09 6 ай бұрын
can i still use this on my non argb motherboard?. i have the msi b450m board with 4pins rgb header
@Planehazza 6 ай бұрын
the fan hubs can just connect via USB mean the software controls all the fans and RGB
@drexter09 6 ай бұрын
@@Planehazza even the mini lcd display connects to the hub?
@MrSpinkser 4 ай бұрын
Do the fans work without the proprietary hub and software?
@thesagaofblitz 4 ай бұрын
yes, I haven't downloaded the software yet and all the fans run on their power.
@MrSpinkser 4 ай бұрын
@@thesagaofblitz Thank you! Can you control their speed?
@cosmic5789 3 ай бұрын
@@MrSpinkseryou might be able to download the software and configure the fans than uninstall. That’s what I did and both the lighting and the rpms seem to maintain. That being said, I’m using static fan curves. I don’t know if you can set a specific temp curve without the software
@morgancruses8146 6 ай бұрын
When is the Restock on tl lcd
@KAJ0312 6 ай бұрын
Lower the price of all your fans god-damn
@joenuts6722 Ай бұрын
they’re really not that expensive when you look at other fan prices and what they offer spec and feature wise
@Stanislav7180 6 ай бұрын
Verry fast tutorial......slow down
@phabran 5 ай бұрын
You can lower the play speed. Hope it helps.
@clave2049 6 ай бұрын
reverse 140mm?????!???
@hassanaoude7895 3 ай бұрын
Fix your software it makes my computer freeze every few seconds for a split second and if I want to report the issue you ask for a purchase receipt this is stupid, I paid soo much for your fans and it ends up breaking my pc
@wardon_wr 6 ай бұрын
👍👌
@beautiful_4ko576 Ай бұрын
It's probably got cheap led lights like my lian li!!! Don't expect to be able to have parts if the warranty expires cause lian li don't care about there customers and won't help!!! They don't sell parts and don't help in anyway to beable to get them!!!
Empower Gaming Computers
Рет қаралды 1,5 М.
The Provoked Prawn
Рет қаралды 39 М.
Mr Matt Lee
Рет қаралды 316 М.