Tutorial: Ombre Bubble cube candles | DIY Gradient Bubble

Tutorial: Ombre Bubble cube candles | DIY Gradient Bubble | Candle Studio Vlog

Рет қаралды 47,719

3 жыл бұрын

MY ETSY SHOP: www.etsy.com/uk/shop/glowedca...
MY BRAND WEBSITE: glowedcandles.com
🚀 INSTAGRAM: / glowed_candles
--------------------------------
👇🏼 ALL MY CANDLE MAKING/BUSINESS SUPPLIES AND TOOLS 👇🏼
CANDLE MAKING ESSENTIALS: amzn.eu/9uU8pEl
CANDLE MOLDS: amzn.eu/gUcyRkK
🇬🇧 CANDLE SUPPLIES: bit.ly/3CMooi0
USE code WICKED for 10% Off
🇺🇸 CANDLE SUPPLIES: bit.ly/3BhPhIk
--------------------------------
DISCLAIMER: Everything shared in my videos is my own personal experience and is for educational and informational purposes only. Everyone is responsible for their own product testing and business structure and I will not be held accountable.
*Some links are affiliates. As an Amazon Associate I earn from qualifying purchases. I get commissions for purchases made through links in this post.
I do not own the music in this video, all attributions:
Music: Solitude - Musician: Rook1e
Montage with: inshot.cc/share/youtube.html

Пікірлер: 108

@janetmartin136 2 жыл бұрын

Thank you so much for this video. Your ombre candles look lovely. I was pleased to see this video come up as I've just got a bubble mould. Perfect timing 👍

@GlowedCandles 2 жыл бұрын

Thank you 😊

@_simone_isaline_3188 2 жыл бұрын

You dont know how much this helped thank you so much

@BeautifulSoulDestiny 2 жыл бұрын

Love the tune playing.. me and my 7 month old are jammin while watching this 🙃

@MisterWhatWhat 10 ай бұрын

Absolutely stunning! What a great idea!

@GlowedCandles 10 ай бұрын

Thank you 😊

@silviaodlerart 3 жыл бұрын

They came out really nicely.my dream to make a candles 💕👍🏼

@GlowedCandles 3 жыл бұрын

Thanks, give it a go and tell me how it went!

@chethanark7806 2 жыл бұрын

Very detailed video ..thanks for sharing .. lots of love from India ❣️

@GlowedCandles 2 жыл бұрын

Thanks 😊

@nathinana8647 Жыл бұрын

hi, how long do you wait to do the next layer? so the colors don't mix? thank you 🙂

@asharichardson9332 3 жыл бұрын

what is your best tip on preventing sink holes. Amazing candles btw!

@GlowedCandles 3 жыл бұрын

Thank you! Pour very slowly at the lowest possible temperature and prep the wick so it doesn't absorb the wax. I hope that helps!

@sabriabryan3606 3 жыл бұрын

What size wicks are you using?

@cscott505 3 жыл бұрын

Loved this video! About how much wax is needed for each individual layer?

@GlowedCandles 3 жыл бұрын

roughly 1/3 of the total candle weight. In this video each cavity holds 160g total. so each layer is around 53g

@cscott505 3 жыл бұрын

@@GlowedCandles thank you !!

@VlogsByDrxp 3 жыл бұрын

Hi! I have a question do you add a metal base to the bottom of your candle after you're done? Thank you :)

@GlowedCandles 3 жыл бұрын

Hi there, no I tell on my labels and website that the decorative candles need to be placed on a tray.

@manishashrestha388 3 жыл бұрын

What wick size did you use in this looks beautiful 🤩

@GlowedCandles 3 жыл бұрын

I use a TCR 27

@helenad7379 2 жыл бұрын

Hi where did u buy your dye color for the candles they look amazinggggg

@GlowedCandles 2 жыл бұрын

Hello, thank you 😊 I use Bekro and I get it from Cosyowl in the UK

@umairsheikh5962 2 жыл бұрын

From where we can buy a mould

@Christine-ni6pf 3 жыл бұрын

Hi im planning to do like that and im begginer can i ask how many candle did you melt before u make a six cube 🥺

@GlowedCandles 3 жыл бұрын

Hi Christine, I started with the single mold and did one candle at the time. There is a lot of trial and errors as each wax behaves differently. It took me a couple of months to get to the 6 cavity mold. Good luck!

@bestia7 3 жыл бұрын

Hiii love ur video, question for u how many time we waiting between the layers for the gel texture? Thx:)

@GlowedCandles 3 жыл бұрын

Hello, thanks 😊 ! Well it depends of the type of wax you use (soy, paraffin, wax blend...). But not long in my case as you need it to bond with the next layer that will have to be poured at your usual temperature.

@iriniabedini4099 3 жыл бұрын

@@GlowedCandles how much for soy?

@GlowedCandles 3 жыл бұрын

@@iriniabedini4099 it will vary with your room Temperature. My workshop is cold so 5 to 10min for me.

@iriniabedini4099 3 жыл бұрын

@@GlowedCandles thank you so much

@raxySL 3 жыл бұрын

Great video, love how they come out. Question, I keep getting crack on the bottom on the candle which ends up being the top .. I am pouring at 65c and my molds are clean and dry. Not sure what I am doing wrong.

@GlowedCandles 3 жыл бұрын

Thank you! From what you said above I’d say nothing from an execution point of view. Might be your wax. Are you using pillar wax?

@raxySL 3 жыл бұрын

@@GlowedCandles I am using natural 444 soy wax.

@GlowedCandles 3 жыл бұрын

@@raxySL ah that would be why then. 444 is a container wax. You need pillar wax for anything you make in molds.

@raxySL 3 жыл бұрын

@@GlowedCandles Oh! Thank you so much I will get a pillar wax.

@kimkashi366 3 жыл бұрын

I thought you should add color when its at a high temperature not pouring temperature. Is this different because of your wax? Thanks!

@GlowedCandles 3 жыл бұрын

I add the chips at high temperature around 70/75 degrees. I re-heat my wax between each colour addition to bring it back to 70

@liliaolinhed2301 3 жыл бұрын

Hi) which is pouring temperature? I always have as freezing white effects

@GlowedCandles 3 жыл бұрын

Hello, pour as cold as possible but frosting is a natural occurrence for soy wax. Really hard to avoid.

@sonuk3114 3 жыл бұрын

Hi how did you put the wick in did you poke a hole in the mold to put the wick through

@GlowedCandles 3 жыл бұрын

Hey, yes using a threading needle. Just make sure to make it right in the centre.

@loudhouseepisodes5772 3 жыл бұрын

Can you reuse the mold after making the whole witht the needle?

@GlowedCandles 3 жыл бұрын

Yes you can. Make sure to use the needle every time you put your wick on to keep the hole small

@julidza087 3 жыл бұрын

and what soy wax do you use? and by the way loved your video, soooo relaxing😍

@GlowedCandles 3 жыл бұрын

Thanks! I use Kerasoy pillar blend and I hardly ever get any frosting except with very dark colours (black). I pour between 60C & 57C

@elizalupi7316 3 жыл бұрын

@@GlowedCandles I've been making Kerasoy pillar candles, and can't seem to avoid frosting. Also pouring at 60C

@GlowedCandles 3 жыл бұрын

@@elizalupi7316 frosting is a natural occurrence when using soy wax. Especially with dark Colors. I tend to stick to natural or pastels so I hardly ever get frosting.

@nishalalwani4841 Жыл бұрын

Around how long for each color to set? And how do you decide the 3 ombre colors?

@GlowedCandles Жыл бұрын

It is about the texture of the wax than the time between the layer. You want the layer to be in a jelly texture.

@sheisthequeen4439 3 жыл бұрын

Hi I’ve us started to do these for myself but the bumps on the top alway end up flat. How can I do it so all the bumps are even and round ? Thanks btw great video x

@esraaahmed2759 3 жыл бұрын

I’m facing the same issue the top always end up flat due to the surface How can i prevent it?

@GlowedCandles 3 жыл бұрын

Thanks! I have dedicated a full video on bubble candle tips including flat tops! I hope it will help: kzfaq.info/get/bejne/bNR7fZuIy9zXZ5s.html

@tammyhorrigan6459 2 жыл бұрын

@@esraaahmed2759 Apparently placing the mold on top of a thick towel before pouring will help with flat tops.

@haleyriddle7465 Жыл бұрын

Hi Marion, I have been trying to make these for weeks now, and I keep getting flakes or cracks in the colored portion… I can’t figure out what is causing this? I heat my wax and check it with a temperature. Im not sure if the dye I use is bad ? Do you have any tips ?

@GlowedCandles Жыл бұрын

Hi Haley, If the dye flakes are not dissolving, it could be the quality of the dye or the wax being to cold and not allowing the flakes to melt.

@cafersplashboot9014 3 жыл бұрын

How do u clean the silicon molds?

@GlowedCandles 3 жыл бұрын

heat gun and tissue paper to remove the excess wax. Then warm water with some soap. rince throughly. let dry for 48h minimum before reusing.

@camillegabriel8780 3 жыл бұрын

Hi, what type of wax did you used? I used pure soy. I don't have demolding issue but it's kinda sticky and soft 😔

@GlowedCandles 3 жыл бұрын

Hi Camille, from what you are describing it looks like you have used a container wax. For any moulded candles you need to use a pillar wax. Specifically designed for this type of candles, the wax gets way harder and allows a good finish. I hope it helps.

@camillegabriel8780 3 жыл бұрын

@@GlowedCandles Thank you. What is pillar wax?

@GlowedCandles 3 жыл бұрын

@@camillegabriel8780 it is a category of wax specific for moulds and free standing candles.

@camillegabriel8780 3 жыл бұрын

Thank you so much ♥

@chloepaulissen8416 3 жыл бұрын

Do you ever get sinkholes? I get them alllll the time and I am pouring at the right temperature. I don’t know what I need to do differently to prevent them. Any tips?

@GlowedCandles 3 жыл бұрын

Hi Chloe, no never. I use Kerasoy Pillar wax and I pour around 60. It could be due to your room temperature, if it is too cold, it would be a reason.

@marinar3926 3 жыл бұрын

@@GlowedCandles where do you get the kerasoy pillar wax? I am having such a hard time finding it

@GlowedCandles 3 жыл бұрын

@@marinar3926 from anywhere I can at the moment! It is so hard to get it!

@asharichardson9332 3 жыл бұрын

what wax do you use and from where??

@GlowedCandles 3 жыл бұрын

I use Kerasoy Pillar blend. I buy it from reputable websites in the UK (never use Ebay).

@elliehorncastle4746 2 жыл бұрын

What wax are u using please x

@elliehorncastle4746 2 жыл бұрын

Sorry just read every message and I now know thank you xx

@user-kg4fx4tt3t 3 жыл бұрын

Can we use a hair dryer instead of heat gun in the last part? Also I am addicted to your candle making videos. They are so relaxing.

@GlowedCandles 3 жыл бұрын

Thank you so much, it means a lot! Good question, I have tried the hairdryer as this is what I had at home to begin with and i would say that it can be done BUT you will struggle as the hair dryer actively push a lot of hot air out. you get two issues: 1) the hairdryer is not hot enough (you'll get there, but it will be long) & 2) because of the air coming out the melted wax is gonna go everywhere. I'd say spend the £15 on a heat gun.

@user-kg4fx4tt3t 3 жыл бұрын

@@GlowedCandles thank you so much for your honest advice.Heat Gun it is!😉💪

@asharichardson9332 3 жыл бұрын

what is your pouring temperature?

@GlowedCandles 3 жыл бұрын

It depends on the wax you use and whether they are scented but usually around 60 degrees celsius.

@sabrinabarry 2 жыл бұрын

How long usually does it take to get a gel texture?? Thx!!

@GlowedCandles 2 жыл бұрын

it really depends on your pouring temperature and room temperature. You can't use time as a measure. you need to wait for that texture.

@GlowedCandles 2 жыл бұрын

it really depends on your pouring temperature and room temperature. You can't use time as a measure. you need to wait for that texture.

@julidza087 3 жыл бұрын

what temperature do you pour to avoid frosting?

@monmtzag5837 3 жыл бұрын

i have the same problem :(

@GlowedCandles 3 жыл бұрын

What wax are you using? Frosting is a natural reaction from soy wax though

@julidza087 3 жыл бұрын

@@GlowedCandles i bought elite 300 from palm and is amazing😍 one question, do you always use fo, or do the designs without fragance?

@GlowedCandles 3 жыл бұрын

@@julidza087 I never use FO in my decorative candles. I have another range of container candles that are scented.

@diyanarayan703 2 жыл бұрын

I actually either repour or use a heat gun works if you’re in a hurry

@yahyafasi8296 Ай бұрын

How can I make the candle shiny pls?

@GlowedCandles Ай бұрын

The shine comes from the mould but you can also use a candle specific gloss varnish

@GabrielaLopez-wx1of 3 жыл бұрын

Hi, where can I get wholesale pillar wax?

@GlowedCandles 3 жыл бұрын

I believe the only way to get it wholesale would be to go direct and buy tons at the time.

@wiki7559 Жыл бұрын

How come you dont get white lines on the darker colour.

@GlowedCandles Жыл бұрын

I never get white lines. It’s about temperature management and making sure your moulds are clean.

@lolitaaahassan461 2 жыл бұрын

What is temperature when you put the wax in cup

@lolitaaahassan461 2 жыл бұрын

@GlowedCandles 2 жыл бұрын

Do you mean in the mold? If so around 60 degres celsius

@safaenafs4682 8 ай бұрын

What fragrance are you using please

@GlowedCandles 8 ай бұрын

All my pillar candles are unscented

@lisawalker7923 2 жыл бұрын

how long each layer set before the next layer was poured

@GlowedCandles 2 жыл бұрын

Funny you are asking, I am making them right now. It is less about time than texture of the wax. You want to gently poke the layer of wax with a skewer and when it is a very thick gel like texture you should be good to pour the next one.

@lisawalker7923 2 жыл бұрын

@@GlowedCandles thank you

@sabrinabarry 2 жыл бұрын

What is the final weight??

@GlowedCandles 2 жыл бұрын

around 160g