TUTORIAL: THE ANDIS GUARD SYSTEM BREAKDOWN

No video

TUTORIAL: THE ANDIS GUARD SYSTEM BREAKDOWN

Рет қаралды 42,730

Күн бұрын

This video is for anyone that's new to using the Andis guard system. There's no technical jargon to confuse you, just a simple breakdown of how the Andis guard system works.Whether your a barber that thinking of moving over to Andis clippers or your someone who cuts their own hair this video should be helpful to you.

Пікірлер: 80

@manmeetsmoney 4 ай бұрын

3yrs later.. still highly useful! The blend between open and close from 0 to 1 was exactly what I needed. Thanks! 👊🏾

@nelomedina8811 10 ай бұрын

In my experience I've been using andis masters and wahl clippers for over 12 years and after so many uses i've learned not to get to technical when it comes to the number on the guards, for instance the half guard for wahls (grey guard) is labeled as 1/16 while the purple andis 0 guard (the OG one) is also labeled as 1/16 but using each of them respectively in closed position they cut a different length. I feel like different clipper companies label their sizing differently which can be confusing if you are using different clipper brands together. For those of you that may be starting out i would say its easier for you to use a guard system (any clipper brand) and stick to it, you'll understand how each guard blend into each other and when you gain experience you'll learn how to comfortably flick your wrist while blending fades and be able to skip guards etc.

@alijahshea7160 3 жыл бұрын

Well done that was so precise and straight to the point exactly what I was looking for

@isaiahbarnes6881 2 жыл бұрын

This answered the question I’ve been looking 20 minutes for. Earned sub

@adrianjackson8498 3 жыл бұрын

Just got yourself a new member sir thanks I needed this.

@razrsharpuk7487 3 жыл бұрын

Thanks Adrian !

@tomerino3 3 жыл бұрын

God bless this tutorial 🔥🔥🔥 Much love man!

@cobbikylgyantu5231 Жыл бұрын

Thank u so much I have learnt a lot in 5mins

@artbrutnewyork 4 ай бұрын

Great video with clear simple explanations question, I recently got an Andis and it came with a “blending” guard. How/When would I use it during a fade? Thanks!

@kevinstrickland5217 Жыл бұрын

Best explamation so far

@troyledbetter6597 Жыл бұрын

Excellent video. Cheers!

@changenoways9555 3 жыл бұрын

video starts at 1:11

@KinaB19 3 жыл бұрын

Thanks lol

@simenandreasknudsen9272 2 жыл бұрын

Perfect man, this was what I was looking for :) Thanks!

@SneakyCrocodile 2 жыл бұрын

So when I’m using a 1.5 guard closed it’s 1.5 then it becomes a 2.0 half way open, and a 2.5 fully open? I’m asking because I need to blend between 1.5 and 2.0 and I’m not sure if I should be fully opening or only half opening the lever since it changes it by 1.0 fully open, and I’m not sure if that translates to when using guards. This topic is discussed a lot for Wahl, but not Andis and I’m unsure if it translates as easily as the Andis open more.

@Mr27danny27 2 жыл бұрын

Imagine the no guard closed is a 0 and the fully open is a half. All the way open isn’t really a 1 guard it’s shorter….use your 0 guard open as if it was a “1” and use your 1 guard open as if it was a “1.5” guard. Use your 0 guard, open half way closed after your no guard open and then your 1 guard open and half way and if you have too fully close the 1 guard.

@dgraytest1 2 жыл бұрын

Great Video!👍🏽💯

@AKAJACE1337 3 жыл бұрын

Really helpful

@abdulrahmanalessa352 3 жыл бұрын

❤️ from Saudi Arabia

@konstantinosliakoutsis 3 жыл бұрын

Really appreciate it, mate!!! Well done. Where can we find the Wahl guards Video?? You upload it?? Can not find...🙏🔝💈✂️🔥

@jaredmartin6801 Жыл бұрын

THANK YOU BRO!!!!!!!!!

@jaymcdonald983 3 жыл бұрын

Thanks bro!!!!

@sagemulkey9890 Жыл бұрын

Thank you so damn much.

@sachukhewaz9356 3 ай бұрын

Bro I need a the clippers how shuld i get. Ind

@lemonman4437 7 ай бұрын

Hey man how are you able to close the andis masters all the way to the 5 lever position mines only allows me to go up to the fourth

@wickedjknivez. Жыл бұрын

Would it be the same steps if we would zero gap the andis masters?

@razrsharpuk7487 Жыл бұрын

Yes I did follow the same steps with my Masters zero gapped.

@dannyg2311 Жыл бұрын

No guard open is not a 1. A 1 is 3mm. No guard open is 2.4mm. A half guard (0 in Andis) is 1.5mm. The misconception of clippers ‘opening to a 1’ came from the fact that a 1 detachable blade = 2.4mm a 1 blade, NOT a 1 guard.

@bmobilebarber Жыл бұрын

This actually helps me! As a barber who's only ever used Wahl, it is really confusing to try to figure out if Andis no guard open is a 1, how is it that not all the guards above that it works the same? (E.g. 0 guard all the way open is 1.5, 1 guard all the way open is a 2, etc.) This comment made it all come clear. 👍🏼👍🏼

@tacoholicssocal1412 Жыл бұрын

Question, the purple double magnetic guards , what other Andis clippers does it fit

@razrsharpuk7487 Жыл бұрын

Hi and thanks for your question. I unfortunately don't know the answer to this. I would suggest if you're planning to buy them go to a barber supplier to check if they would fit the clipper that you're interested in. I do know though that they work with the Andis Masters both corded and cordless versions.

@PANTERALEO56 8 ай бұрын

These Double Magnetic guards also fit Oster Fastfeed and and Stewart by Oster Clipper Blades.

@Jerazyck Жыл бұрын

Great Video. #Barber4Life

@fandechavalones3022 6 ай бұрын

can i use this with any clipper ?

@mannythepackman9796 3 жыл бұрын

Hi I like to shave my beard with my Andis Master with the bail arm at full length. How ever it is too short. Do you think using a guard on the master would still give an even cut on. If not could you recommend the best clipper for shaving a beard on say a number 2 or 2.5 . Thank you

@Mr27danny27 2 жыл бұрын

Yeah use your guards if it’s cutting too short. The fully open isn’t exactly a 1 it’s a bit shorter. Your guards will still leave an even cut. Use your 2 guard open for a 2.5 or closed for a 2. And so on and so on with a higher guard number

@barbereastlondon6239 3 жыл бұрын

Does Wahl guards work on Amdis Masters

@sebvaja8571 3 жыл бұрын

No mate

@775MrBob 2 жыл бұрын

Do these guards fit wahl magic clippers?

@razrsharpuk7487 2 жыл бұрын

No they don’t bro unless you get a blade conversion kit that lets put Andis blades on Wahl clippers.

@alexmollinedo143 3 жыл бұрын

Ay where did u get that 1st gen 0 guard from andis

@J92. 2 жыл бұрын

Lmk if you ever find out please

@saltwaterbarber6199 2 жыл бұрын

Not a 1st gen

@omx3x 9 ай бұрын

What length would it be if you had a 1 guard with lever open?

@bennyscissorhands6477 5 ай бұрын

open blade on andis is a 1, a 1 guard is a one, 1 + 1 = 2🤘🏼

@Shxdee_star 2 жыл бұрын

Do these .5,and 1.5 guards fit any Andis model?

@razrsharpuk7487 2 жыл бұрын

They fit standard Andis clippers like the Masters but not detachable Andis blade clippers like the Supra ZR.

@Username223. Жыл бұрын

If I have on my 0.0 guard on & if I put the lever halfway does that make it 0.5?

@bennyscissorhands6477 5 ай бұрын

makes it a 1, .5 + .5 = 1🤘🏼

@3ddcutz 3 ай бұрын

@@bennyscissorhands6477?? Huh

@bennyscissorhands6477 3 ай бұрын

@@3ddcutzcmon maaan, one half plus one half equals a whole, a half guard open half way (on the masters) is a one

@terrancesanders4571 3 жыл бұрын

So the one guard and a half way lever is 1.5 correct

@thedanwriter1 3 жыл бұрын

My bald fades didnt get better until i started using the .5 and 1.5 guards from andis

@Mr27danny27 2 жыл бұрын

@@thedanwriter1 those are honestly useless bro, use your 0 guard open as if it was a “1” and use your 1 guard open as if it was a “1.5” guard. Use your 0 guard, open half way closed after your no guard open and then your 1 guard open and half way and if you have too fully close the 1 guard.

@bmobilebarber Жыл бұрын

Scroll up and check out Dani'El Gee 777 comment.

@Massproduce201 Жыл бұрын

@@Mr27danny27 can you explain that differently I think I almost understand

@Mr27danny27 Жыл бұрын

@@Massproduce201 the way I fade is, bald line, and then the no guard open, fade that out using your lever, and then I use the 0 andis guard not the 0.5 andis guard you can buy that one doesn’t work. With the 0 andis fully open I make another guideline and then blend it out with the lever, and then I use the 1 open another guideline and blend it with the lever if I have too I use the corners of the 0 guard open to clean up dark spots and stuff but after that I use the 2 open and so on and so on. By blend it out with the lever I mean close, almost fully closed half way almost all the way open and fully open. Like the knotches some clippers have on the clicks! For my 1 fades I use the 0 guard open as if it was the 1 guard closed, then use the 1 after and so on and so on. Hope this helps

@toongasmoke 11 ай бұрын

Do these guards fit the t-outliner models tho??

@razrsharpuk7487 11 ай бұрын

Not the T-Outliner trimmer.

@toongasmoke 11 ай бұрын

@@razrsharpuk7487 figured! Thanks alot

@climbjay 2 жыл бұрын

Anyone know if these mag combs work with a andisnation fade and us1 pro clipper?

@PANTERALEO56 8 ай бұрын

Only the single magnetic and clip on guards

@1nious 7 ай бұрын

Kinda look like pastor Michael Todd 😻

@thongpham1897 2 жыл бұрын

.5 guard and lever opened , is it 1.5 guard? Is it correct?

@bennyscissorhands6477 5 ай бұрын

yes

@andanteparker2782 2 жыл бұрын

What guards you use or do those come with the clippers?

@razrsharpuk7487 2 жыл бұрын

I use the Andis double magnet guards. The Masters don’t come with any guards in the box.

@mehkaigarlick5396 2 жыл бұрын

where do you get these guards?

@thesharinganknight9859 2 жыл бұрын

Amazon

@imotomoves 2 жыл бұрын

Bruv. Ain’t the 0 guard closed shorter then the no guard open?? The next step should be 0 3/4 open.

@swizzlecuts5004 Жыл бұрын

Andis guards are STILL technically confusing… No guard OPEN = #1 AND 0 guard open = #1 as well as 1 guard closed… 😐

@iknowsports9454 2 жыл бұрын

If you use the Zero on fucking 1 half I'm gonna flip the fuck out if your using the masters😂 cause they are useless but let's see what you doing

@Massproduce201 Жыл бұрын

What you mean by this I’m trying figure this out myself

@sharongiraldo7770 2 жыл бұрын

Why did andis make this shit so complicated

@Mr27danny27 2 жыл бұрын

Literally the easiest fading method