M-LOK Mounting Hack! Magpul Hates This Trick

Рет қаралды 885,542

Күн бұрын

This video is for educational purposes and discussion only. Do not attempt to imitate anything contained herein.
If you’d like to support the channel for free, please use the links below whenever you start your online shopping. This is huge and really helps:
AR500 Armor: goo.gl/BeiUaS (Save 5% with link and code “twangnbang”)
Brownells: goo.gl/YzTrzd
Cabela’s: goo.gl/HrckkO
TacticalWalls: goo.gl/FuTBj4
ShootSteel.com: goo.gl/mUNLzf (save 10% with link and code “TWANG10”)
Use code “twang15” for 15% off at CannaeProGear.com, including sale prices, plus free shipping on orders over $100.
Use discount code “twangnbang” for a 5% discount at OpticsPlanet.com

Пікірлер: 1 000

@1dogelsa 7 жыл бұрын

I must be getting old because what we used to call common sense, is now called a hack... Good instructional video.

@nameless-og 6 жыл бұрын

Charles Fields ... I had to watch this again because I didn't understand what the hack was either. I'm thinking about putting up a hack video tonight on how I clean my teeth. 😄 that said, I like that people take the time to do this stuff, because it's great to sit down at the bench and play something while you're doing it... Sort of like a reassurance that your not about to break the new thing you got. Just wish they were titled accurately... Especially since, if I ever load a vid after not affixing a rail for a year or two, this video clearly won't be the one I pull up due to the title.

@Raymo2u 6 жыл бұрын

Common Sense means a different thing nowadays, its a metaphor to give up your rights for the false safety of others now.

@nameless-og 6 жыл бұрын

Raymo_2_u HA, basically

@toddmerriott6901 5 жыл бұрын

Well said!

@maxwellmortimermontoure7274 5 жыл бұрын

Funny how over time people talk different, isn't it? Eventually a "life hack" is gunna be an old person thing.

@bobby1970 2 жыл бұрын

This video is by far the best explanation of how to make M-Lok installation work in a relatively easy way. This is a lot less complicated than all the other videos that other people have posted. This helps a lot of people.

@TWANGnBANG 2 жыл бұрын

Glad it helped!

@50StichesSteel 7 жыл бұрын

You forgot to add the screenshot with you holding the handguard at the screen with a surprised look on your face for the full click bait feel

@TWANGnBANG 7 жыл бұрын

😬

@MoqtadaAlSadir 5 жыл бұрын

yuck

@Walker_328 5 жыл бұрын

But you watched it....

@inevitability1597 4 жыл бұрын

Came here looking for a comment like this, I am fully satisfied.

@1DRIPSTER 4 жыл бұрын

Lol

@mentals555 7 жыл бұрын

dermatologists hate him

@TWANGnBANG 7 жыл бұрын

@SgtEaglefort 7 жыл бұрын

MAGPUL WANTS THIS VIDEO BANNED (POLICE CALLED)(GONE SEXUAL)

@TWANGnBANG 7 жыл бұрын

Nice!! :)

@kbnguy 7 жыл бұрын

MAGPUL WANTS THIS VIDEO BANNED (POLICE CALLED)(GONE SEXUAL) ... and see what happen next. Epic! must see. You won't believe your eyes. Click now and buy!!

@hypersteven101 7 жыл бұрын

GONE SEXUAAAAAAAL!

@thatguy1080 5 жыл бұрын

(GUN PULLED)

@beausef1410 5 жыл бұрын

Lmao!

@liggerstuxin1 2 жыл бұрын

It’s amazing how many tutorials didn’t show how to loosen and then tighten to lock it… 👍 This video is a public service. Great and simple tutorial.

@twombley96 5 жыл бұрын

This is freakin’ brilliant. I just tried this on my shotgun grip, and this worked PERFECTLY. Well done, dude. Huge props on this. Thanks for sharing!

@turdfurg47 2 жыл бұрын

This isnt some secret this Is in the manual for the handguard

@taylorbokshowan5713 Жыл бұрын

How did you do it before?

@twombley96 Жыл бұрын

@@turdfurg47 and? the video helped me out. if that bugs you too fucking bad.

@robertalford1321 6 жыл бұрын

Brother, I gotta tell ya...if you were east of Raleigh last night you would have known I was having a go at my first MLOK accessory installation. LOL!!! But then I found your excellent video, and I can't thank you enough. I can only imagine this instructional gem of a production has saved countless new MLOK purchasers from busting an aneurysm. Sir, you are appreciated!!!

@landman177 4 жыл бұрын

Good video. I just bought my first M-Lok rifle and I really was a little confused when I got it (yep, I just turned 60). I carried a modified A2, M-14 or M40. "Never Forget Beirut" !

@grenade.turtle 5 жыл бұрын

Residents in Lawrence Kansas didn’t know this simple trick could save them millions

@dongarrett6228 4 жыл бұрын

Should have came to k.c.ks.........lol.

@brendanmarriott661 3 жыл бұрын

More like Ottawa

@TracyGossett Жыл бұрын

Bought my first rifle ever (and I'm 45) yesterday, then watched a bunch of videos saying I needed a sling, so I bought a sling with an mlok sling mount point and have been struggling until I watched this video. I wasn't backing off the screw far enough because one video said 180 degrees which wasn't enough. Thank you for this video.

@PikeyScott 7 жыл бұрын

Fun video. Thanks for sharing the trick. I wouldn't be surprised if Magpul updated their install instructions to utilize this method. Blind install with absolutely zero guess work.

@mixflip 5 жыл бұрын

Why would Magpul hate this trick? Am I missing something????

@TWANGnBANG 5 жыл бұрын

The joke. You’re missing the joke.

@joesaxon6566 4 жыл бұрын

@@TWANGnBANG there is no "joke" just a stupid title

@toddboone333 3 жыл бұрын

@@joesaxon6566 It’s clickbait bullshit. There’s no joke.

@areus2016 3 жыл бұрын

Salt

@joshuaoh912 3 жыл бұрын

@@joesaxon6566 so savage

@paulhayden3446 4 жыл бұрын

Your totally right. This is an easier way to adjust the T-nuts. There is a draw back from doing it this way though. When ever you go past the point of the right adjustment you are eating into the thread lock and it will not hold as well once you back it off. Just like going to far with a pipe fitting. If you back of the fitting you need to take it back apart and re-dope it. Doing the T-nut the correct and a tad bit harder way insures the best fit and staying power of the threads.

@nickjensen5558 6 жыл бұрын

Thank you! I'd given up on adding a rail a week ago but this made it so easy.

@drmaudio 7 жыл бұрын

A soccer mom discovers this one weird trick!

@TWANGnBANG 7 жыл бұрын

@jeremiahjordan4422 3 жыл бұрын

Just added an MLOK Hand Grip and attached my first accessory to it quickly an easily thanks to your tips. I saved this video for future reference, though I think I'll remember. Thank you!

@nameless-og 6 жыл бұрын

Man gathers custom rifle accessories, check out Jennifer Aniston's shocking reaction!

@saxmusicmail 3 жыл бұрын

GREAT! Just got my first M-Lok forend and accessories. This tip made it easy. Thank you!

@Benjamin.Bushcraft 4 жыл бұрын

M lock the perfect example of how “progress” can be a backwards step! This video helped a lot though. Thanks!

@zukkuszukkus6803 7 жыл бұрын

next video:!ATF wants to ban this technique

@filpaul 7 жыл бұрын

bob smith No kidding: With President What's his face, they were floating the idea that you would need to bring your firearm to a ATF licensed gunsmith for any work done, even what's in this video. And fill out another background check when you pick it up of course.

@ashketchup9555 7 жыл бұрын

has science gone too far?

@bryanmunson1685 3 жыл бұрын

This popped back up on my Recommendations and I had to watch it again. Can’t like it twice so I’ll just leave a Thank You. I hope T&B is doing well I these C19 times. God bless brother

@ixnorp4270 Жыл бұрын

I am about to order my first M-LOK accessories. I'm glad I found this video, as it illustrates quite well how the system works.

@ytbenavraham9553 4 жыл бұрын

Thanks for that. I knew there was an easier way to mount the rails.

@DelightfulTyrant 7 жыл бұрын

That click bait title, nice. "Centipedes, in MY AR-15?"

@DelightfulTyrant 7 жыл бұрын

Match grade Wolf Ammo? Has Science gone TOO FAR? REAL or FAKE

@Coconutgirl260 7 жыл бұрын

keymod isnt MLOK

@DelightfulTyrant 7 жыл бұрын

Shanna, neither of us said it was so I'm not sure what you're talking about.

@wayartio 4 жыл бұрын

Outstanding video sir. I discovered this by mistake and it is how I have been installing these devices. Thank you!

@doublezzranch849 4 жыл бұрын

THANK YOU 🍻 I've been going crazy setting up my SCAR'S KINETIC forend and all it took was your video to get me going 👍. Your friend in OREGON 🤠

@davidbutera5985 7 жыл бұрын

That's how I did it the first time I tried. Never bothered with Magpull instructions for something so self explanatory. When I saw this video I kept watching waiting for the hack lol

@allenjohnson4938 4 жыл бұрын

David Butera it was so ez i couldve sworn i did it wrong because all the videos are 20min plus

@ericjohnson8001 3 жыл бұрын

IKR!!?? Im sitting here waiting, waiting...when's the "ah-hah" moment?? I feel cheated and used.

@jaredgraber2000 2 жыл бұрын

I did the same thing when I got my ar15 and thought that's how everyone else does it and also I never heard that magpul hated it.

@tylermurphy4020 7 жыл бұрын

Hell yeah now I can get my certified youtube armorer patch haha!

@StateofMindandheart Жыл бұрын

Good video, I've owned all types rifles my whole life and have stuck to the basics. I finally decided to check out the M-Lok connection platform and had no idea how they worked and I'm not ashamed of that. Every arrogant person commenting on this had their first day handling this style product wether on construction or firearms. They also stopped to watch the video 😂 knowing so much. Maybe they got click-baited into it.. it's a real thing. I installed my first M-Lok rail setup yesterday on my AR. I'm a fan of the product now. Thanks for your help. It is super simple but you don't know what you don't know.. grow up boys.

@kingsupreme25 2 жыл бұрын

Sheeeesh ....4yrs later, your still saving lives.... Damn. This thing was starting to piss me off lol . Thanx

@danbuckley6584 4 жыл бұрын

Wow! Thanks! I was using bubblegum to hold my mlok on and thought the screws and stuff were "extra parts". I feel so tactical now!

@omardumbrell435 6 жыл бұрын

Haters will say it's been photoshopped.

@TWANGnBANG 6 жыл бұрын

@davidshaffer4649 2 жыл бұрын

Man,just bought my 1st ar and looked at the mloc sheet and thought what the hell.they really should have people who use the product make the instructions.always found engineers can find a harder way to do the simplest thing.found your vid 15 min.after I figured it out.still enjoyed it.thank you.

@garteaga482 2 жыл бұрын

I just fiddled with my m-lok for like 30 mins then found this video and it worked instantly. thank you for posting this trick!

@TWANGnBANG 2 жыл бұрын

Glad it helped!

@dreamerx23 7 жыл бұрын

1 in 5 dentists don't recommend this

@TWANGnBANG 7 жыл бұрын

@mrrustygray 7 жыл бұрын

That's cool. I still have quad rails on one AR, Keymod on another. There is no magic unicorn. Some people get so hung up on the hype they cannot contain themselves.

@gpants1481 7 жыл бұрын

Quad rails work and are strong. The only reason I moved away from them is to reduce the weight. I am a contactor and carry a D20RS which is a Heckler & Koch, HK-416 variant for 10 hour daily. If you want to make your rifle lighter I recommend using MLock as it is superior than Key Mod systems.

@inlandbhsk8r 5 жыл бұрын

Stuckgrenadepin same. I have quad rails on all of mine, I like them better anyways, never mind giving into the hype

@eljuano28 6 жыл бұрын

I never read the instructions. Glad I didn't realize that I was doing it "wrong." Some things are self evident. Nice to see someone else figured it out. 😋

@stevenbelford8267 4 жыл бұрын

Disregard that I skipped one small part of the process. Worked great. Thank you for the knowledge

@eXdXgXe4life 7 жыл бұрын

Why would magpul hate this?

@TWANGnBANG 7 жыл бұрын

It's just a meme done for humor.

@MikeHawke83 7 жыл бұрын

TWANGnBANG well I was wondering how this would help pick up girls and give me killer abs.

@WHITEBELT44 7 жыл бұрын

Magpul hates clickbait

@mastalee1776 7 жыл бұрын

Chip Hardee it's a way for people to click on the link. everyone's doing it and it works. at least his info is good info. just part of thing youtubers must do to keep up

@EagleRun23 7 жыл бұрын

Chip Hardee that's a silly reason to unsubscribe.

@zachconant7031 7 жыл бұрын

Doctor's hate him

@MrMd5555 7 жыл бұрын

Zach Conant... But parents love him!

@georgedean8509 5 жыл бұрын

You can use a 7 mm open end wrench on the T-nut rather than the Crescent wrench or pliers. Neat trick, BTW. Recently I needed to cut one screw to the minimum length to get it to turn into place between the gas block and handguard's flats for a bipod stud mount. It cleared by a whisker. I put the screw in a vice and cut it using a Dremel & cutting wheel.

@nightcat87 3 жыл бұрын

Definitely worth its own video. Gotta love little tricks to make your life easier.

@wacokid6588 6 жыл бұрын

If you're over 40, you can't afford not to see this!

@TWANGnBANG 6 жыл бұрын

@davidmoorea1961 4 жыл бұрын

Amen!

@GreenJackal 7 жыл бұрын

Click bait beat down.

@TWANGnBANG 7 жыл бұрын

I think too many of my viewers get the joke even if a few don't.

@jacobridgedell2096 7 жыл бұрын

TWANGnBANG I haven't watched one of your videos in a while, but laughed when I saw that so figured I would watch it. but yea most of my spam says weird trick lol

@nagasako7 7 жыл бұрын

Top 10 Gun Clickbaits of 2017

@TheSkipper1921 6 жыл бұрын

Well, I'd say by the negative thumbs down votes it's about 1/6 think it's clickbait....so far......

@wage4598 4 жыл бұрын

@@TWANGnBANG we get the joke its just so dead and unfunny its considered an insult

@Phut68 7 жыл бұрын

Sweet! I'll keep this in mind on my next mlok accessory.

@imHim710 7 жыл бұрын

thanks for teaching me this. I recently installed a rail and this would have been useful to know before

@digitalbuzz 5 жыл бұрын

"You have to push it in or it doesn't work."

@cwolf8841 4 жыл бұрын

Surpising MagPul instructions don't tell you you need a 7mm wrench and a 1/8" allen.

@themightycrixus1131 2 жыл бұрын

Very useful video. What seemed like an easy install involved some fiddling before I found this. After it not feeling as tight as I wanted I kinda figured this trick accidentally. Thought I may have stripped my new foregrip!

@kaufmann85 7 жыл бұрын

great tip. I preferred k-mod to m-lok because I thought it was hard to attached m-lok accessories. This will help.

@surratt95 7 жыл бұрын

Damn. I never read the instructions on how to actually do it. I actually have been doing this hack and never new it!!! Screw instructions.

@TWANGnBANG 7 жыл бұрын

@JM-xi6yn 6 жыл бұрын

Bob Surratt destructions are for people with no imagination

@petercrawford8112 6 жыл бұрын

Bob Surratt me too lol

@maxwellmortimermontoure7274 5 жыл бұрын

I did! Now I have paper cuts on my johnson...

@Pipizzakitchen 5 жыл бұрын

Honestly, I think that's how everyone had always done it.

@TWANGnBANG 7 жыл бұрын

For those unfamiliar with how Magpul says to do this, here are the instructions they include with their accessories. Two whole pages are spent instructing you to measure rail thickness, attempt to match with t-nut spacing, remove and repeat until you get it right (PDF file): www.magpul.com/Files/Images/PDF/M-LOK/M-LOK_Tips.pdf

@dannyo383 6 жыл бұрын

TWANGnBANG yeah fuck that... your instructions are looking way easier

@OGDoubleJ 6 жыл бұрын

TWANGnBANG interesting. I literally did this out of box without reading the information haha. No idea you were supposed to measure

@bigjake4122 6 жыл бұрын

TWANGnBANG the way youve shown in this video is actually the way i was taught to install these and if anyone is nervous about doing it this way and doing something outside of the instructions we have shot full auto set ups 5.56 7.65 300 blackout etc using this mounting technique over and over till you could cook bacon on the barrel and weve never had one get lose on us yet! great video twang!

@Cnoah48 6 жыл бұрын

Good info. But the “magpul hates this” click bait is pretty lame

@FUBuddy 6 жыл бұрын

they probably actually do not approve, doing this will mar parts, leave scratches and what not that would not happen if you take your time and go by the manual. i just use a small crescent wrench and eyeball it, little trial and error but pretty much everything is first time go

@treizTUBE 7 жыл бұрын

I figured this out pretty quick when I got my first rail, works great.

@JJ-ln9si 3 жыл бұрын

Excellent vid, thanks! Worked perfectly! Did not have to take the handguard off which really made my day (not literally I'm pretty happy).

@bigred2989 7 жыл бұрын

Why the hell doesn't Magpul put that in the instructions? It would be so much easier to attach things if I knew to try this.

@TWANGnBANG 7 жыл бұрын

I honestly don't know. Sometimes engineers are better at designing things than using them. :)

@tonyz2897 7 жыл бұрын

If I had to take a guess, it's because adjusting as you tighten ensures that the final tightening will be done into fresh threadlock compound, not compound that's potentially displaced or stripped off by having the threads pass over it multiple times.

@ryanmatsuoka8724 6 жыл бұрын

Probably want u to strip the nut or screw so u gotta buy new ones

@OneWildTurkey 6 жыл бұрын

lawyers and liability

@mattelder1971 5 жыл бұрын

Sometimes? That's basically every engineer ever. Most of them have zero real-world experience with the products they design.

@griff8858 4 жыл бұрын

Took me almost four minutes to realize it's meant to be comedic. You're too accurate to what firearm channels are actually like these days- you were two years ahead!

@jaredc8281 2 жыл бұрын

The definitive video on this topic. Bless you good sir 🙏

@deplorabledave1048 4 жыл бұрын

Ohhh. I just started using Mloc and did not know this. Great! This will help things out a lot!

@RandomxHero45 6 жыл бұрын

2-3 Dentist perfer Colgate.

@BossinDawson253 7 жыл бұрын

M-LOK for the win

@EyesadriftVA 7 жыл бұрын

Right on thanks! Will be getting one for my AR at some point. Will keep this in my back pocket.

@jpromano_ 3 жыл бұрын

This is genius! This should have been the installation instructions from Magpul. Thank you!

@choke666 4 жыл бұрын

BIG THANKYOU! I WAS GETTING P*SSED, BUT ITS SOOOO EASY! :) TY!

@privatesector0422 6 жыл бұрын

Hi I'm Magpul and I hate this trick I absolutely hate this trick I wanted to be dissolved I wanted to be hung I wanted to be shot I hate this trick I can't stand it!!!!

@tomg.5194 4 жыл бұрын

This video made my install quick and easy. Thanks 👍🏾

@Fusako8 Жыл бұрын

Very useful for me. Just mounted my flashlight to my hi-point 10mm bullpup PCC. Love that goofy gun, it is sooo. . . different.

@Mrgunsngear 7 жыл бұрын

perfect title

@TWANGnBANG 7 жыл бұрын

😬

@heyzoos-cgr9369 6 жыл бұрын

Ah the obligatory Mrgunsngear comment on a gun channel for a bit of advertising ;) Lol

@DEATH_TO_TYRANTS 6 жыл бұрын

all the 3 comments above mine, made me laugh my ass off.

@lightingfires8026 5 жыл бұрын

Florida Man wow doesnt take much to make you laugh. r u a little on the spectrum?

@techti8792 3 жыл бұрын

@@heyzoos-cgr9369 LMAO. right. He pops his head in every gun channel

@kohnfutner9637 4 жыл бұрын

I'm amazed at how difficult and over complicated forearm accessories companies have made guns.

@MrOffshore 3 жыл бұрын

Now that's a nice trick...makes it effortless!! Thanks.

@Hightower1545 6 жыл бұрын

Thank you!!! You just saved me from high blood pressure 😂

@Carpythesharky 5 жыл бұрын

I thought this was the standard way to install M-Lok accessories? I haven't read Magpul's instructions, only instructions that come with the accessory itself. Also this is how my local gunsmith explains to customers how to install it. Hmmm... common sense people? Good video nonetheless.

@stevenpeterson8444 7 жыл бұрын

great hack!

@BIGRICKLITTLERICK 2 жыл бұрын

Good video! I have a question, so if I buy an attachment for my m-lok and whatever my be, it doesn't come with some type of lock tight should I put some on before mounting? Like for instance a fore grip or a bi-pod! Very new to the ar and m-lok platform and was wondering what you thought? Thank you!

@danfromthesouth5352 3 жыл бұрын

I am new to mounting accessories to M-Lock, so this hack has been VERY helpful!! I don’t understand the frustration in the comment section though. The other videos I’ve watched, they did it a totally different way...I like this way better.

@TWANGnBANG 3 жыл бұрын

Glad it was helpful!

@Dabkilla 7 жыл бұрын

seriously? I thought this was common sense ??

@dontask8979 7 жыл бұрын

BangSwitch It is...

@homersimpson6969 7 жыл бұрын

This isn't a hack. This should be part of the standard instructions on how to install M-lok. P.S. The word Hack is misused and overly used incorrectly. This is one of those times. I still love your channel.

@TWANGnBANG 7 жыл бұрын

The meaning of the word has long changed to include "improvised solution." That's what this is.

@nikolaik3541 7 жыл бұрын

The "beauty" of language is that it evolves. Go ahead and compare modern English vocabulary to that from a century ago.

@homersimpson6969 7 жыл бұрын

You are right, the beauty of any language is it can evolve. But just because one person, or a thousand people decide one day to change the meaning of a word through ignorance or defiance, does not make it correct. Here is a link to several misused words that are used every day. And one day if the definition of any word is changed or adjusted, or publicly accepted, so be it. But to continue to use words incorrectly only shows ignorance. www.independent.co.uk/life-style/the-58-most-commonly-misused-words-and-phrases-a6754551.html

@jjohnston94 6 жыл бұрын

I was disappointed when "hacker" stopped being somebody who was bad at golf.

@stephenlott9004 6 жыл бұрын

homersimpson6969 - I literally know what you mean. I'm literally glad I'm not the only one.

@blackrifle3742 5 жыл бұрын

You’d think Magpul would love that your sharing how to make their rail system easier to use.

@ReversePolarity5 4 жыл бұрын

That just worked like an absolute charm for my 1st own M-LOK! But I do remember trying to help a friend with his and how frustrating bit was, so thank you! Awesome. #M-LOK

@mklawson83 7 жыл бұрын

Click bait title. Used the word hack in place of tip. Said, "X hates this..." No Twang and Bang intro. What is the world is going on?

@DJ_CRIZP 7 жыл бұрын

or you could just go with keymod and not screw around with this...

@Really-AintBuyn-nit 7 жыл бұрын

Crap system for mounting. Drop your riffle and see what falls off.

@kentuckyboy541 6 жыл бұрын

Doug Castetter. precisely

@joerichie5555 6 жыл бұрын

For sure go with key mod... I mean who wouldn’t want their accessories to fall off when bumped 🤦🏻‍♂️

@CHI-TOWN_FELON_ 6 жыл бұрын

Keymod is garbage

@MrEvanfriend 6 жыл бұрын

Keymod AND M-Lok are garbage. Quad rails work exponentially better than either, and the only "con" to them is the "cheese grater" nonsense that anyone who has actually used them knows to be false.

@betweenthebars19 2 ай бұрын

I’ve never been able to do one of these properly by feel. Always had to see it enough. But still managed to be successful in all my uses of them.

@charlesbeall2589 Жыл бұрын

I use this method but first thing I do is grab a driver handle with the proper sized bit. Sure makes for a simpler process. My 'OCD' also prevents me from buying any other M-LOC rails(when I need a 5 slot) but Arisaka 5 slot with 3 fasteners. They don't sound like it but they're even made in the US.😁

@florious80 3 жыл бұрын

Great video. The cam wasn't working for me but this video with the advice to tighten all the way then back down was the trick!!! Thanks!

@55waffle 7 ай бұрын

Bro thank you so much i finally got how to do this best video about this by far!!

@pravoslavn 3 жыл бұрын

Another excellently done presentation from the Master himself. You and Mr. Harrell leave all the others in the dust...

@TWANGnBANG 3 жыл бұрын

Thanks so much!

@AZHighDesert2 7 жыл бұрын

Thanks for this, trying to figure it out the first time was a pain in the ass :)

@therealblakekirkham5701 6 жыл бұрын

Does this only work with that hand guard because it has a lip where it catches for it to tighten?

@brentphillips9247 3 жыл бұрын

Slick tip. Great video as usual. Just got my magpul stock for my Mossberg 500. Stock has a rattle like a broken piece of plastic is inside the pistol grip part. Tried but cannot get it out. When I installed it. It doesn't rattle as much because I can't flip the grip around as quick but my OCD sure knows it's in there. Anyone else have this issue?

@shaq1 Жыл бұрын

I hope I don’t sound like I am showing off but I had spare curtain pole latches which I sawed the straight parts off then screwed them on to my air pistol, I put one on the bottom for my laser and one on top for my sight scope and it worked but I have ordered a M-Lok Aluminum Rail Mount Handguard so I will use this video when it arrives although I don’t have any issues i am sure it will look better with the add on mounts.

@InSightFreedom 5 жыл бұрын

Great hack. I have yet to mount a M Lok accessory but that’s about to change with the Ruger Precision. Thanks.

@DevilDog68 5 ай бұрын

Another super helpful video! Thank you and God bless.

@reliablethreat23 3 жыл бұрын

This was incredibly helpful. Thanks!

@terrycostakis6284 4 жыл бұрын

No longer will I dread mounting M-Lok devices. I had two of them mounted within five minutes and even mounted one upside down, then removed it and reattached it correctly still within the five minutes. Thank you sir.