Welcome!

Hope it works for you as well as it does for me. I have used and abused it and it's still going.

Welcome!

Welcome!

No, not really. I have used mine until I could barely touch the side and it never stoped. If you are using it to overheat more than that, you have the wrong tool for the job. You need either a bigger model or a professional one.

@@UltimateDIY The jobs I was doing were not major very small jobs It was just overheating and stopped working until cooling down It's my job this is what I do I'm a builder I know what tools to purchase for each job I'm just telling you my experience it overheated with me it needed at least 5 minutes to cool down for the tool to work again and it's new 5 months old

Exactly this is why I say you might have the wrong tool for the job. I even used bigger than recommended drills in concrete for multiple trough holes at a time and I was tired before the tool. The other posibility is that you have a defective one. The other other posibility is that they changed something between when I bought mine and when you bought yours. Again, honestly, I abused mine way more than it's designed to be used and it never stopped.

@@UltimateDIY I have many impact drills very big and this for small jobs I was using this on small jobs and it overheated only somebody with no experience would use this small drill on big job It's common sense you don't use small drills with small motors on heavy jobs It was on small jobs and it overheated I'm just telling you my experience for me the tool overheated for you it could be great that's great but for me it overheated

@nickmarangos2475 then it's quite clear, either defective or they changed something internally in the tool to make it weaker 😵‍💫 When it overheats are you able to barely keep your hand on it's side? The hottest mine got was when I could barely touch it for 1 or 2 seconds before hurting. It was still working but I decided myself it's too hot and I was also tired from holding it. But this happened only after abusing it with thicker than normal drill. It also gets hot with trough holes in 25cm concrete, but never shuts down.

It seems it's not mandarory, as I seem to work just fine with the tool 🤭 I will continue with the talking then ✌🏼 Thank you for watching as always!

🤭