I hadn't realised how elegant the slider mechanism was, nice to see
@celeselements3 ай бұрын
Thank you!!!
@FXPearStudio9 ай бұрын
I love the inventiveness. Although the screen is the least thing we pay attention. The mechanisms applied here could be more beneficial in other departments. Just keep going. We find out by freaking around, right? :)
@celeselements9 ай бұрын
Great point!
@OVERKILLFPV7 ай бұрын
I love how you MacGyver the screen on the radio. Impractical but still a cool concept. Keep at it👊😁
@celeselements4 ай бұрын
Thank you!!!
@kolschejung446510 ай бұрын
Great videos man, keep doing it please 🙏
@celeselements10 ай бұрын
Thank you!
@catalin185910 ай бұрын
Great video 😊
@celeselements10 ай бұрын
Thank you!
@p1xelman9 ай бұрын
I loved this OLED... The slide version is not bad; it just needs more finishing touches.
@celeselements9 ай бұрын
Thank you, It is not intended for real use, it will need more dedicated work for real use.
@wjrsilva46346 ай бұрын
with this larger screen, a 3d print design similar to a frsky tandem or duplex will be interesting
@celeselements4 ай бұрын
Thank you for watching!!!
@DiTuttoUnPo7210 ай бұрын
Sei grande.. Anche se mi fai cambiare progetto ogni volta💪💪💪
@celeselements10 ай бұрын
Thank you!
@he214abc9 ай бұрын
oled should be a standard for bw radio
@celeselements9 ай бұрын
I agree!
@seanyfpv9 ай бұрын
this is SO cool
@celeselements9 ай бұрын
Thank you!!!
@johanakerblad3398 ай бұрын
I really like your idea and the display with yellow taxt is lovely! Do you have information on how to connect this type of display and a suggestion where to buy one? I love the Pocket radio design but when you program models my 70 year old eys get tired of the small text. I would like to use your idea and buy a small plastic case or build a small ply box and mount it stationary in the top position.
@Greenhorn_FPV2 ай бұрын
Sweet!!!
@celeselements2 ай бұрын
Thank you!!!!
@PerchEagle8 ай бұрын
I hoped you explain the lcd cable adapter conversion steps. I understood it's 2 stage adapter but don't know the rest how you did it.
@dod1809 ай бұрын
Great job just a little 3d print work and it would be a great addition
@celeselements9 ай бұрын
Thank you for opinion!
@122119919 ай бұрын
I really like this. You know if the AG01 gimbals mini the ones for the zorro. Can be used in this?
@celeselements8 ай бұрын
Thank you! I'm not sure about that. But It seems possible.
@johanakerblad3398 ай бұрын
According to the info I seen it is not possible because they are to big.
@JohnStenborg10 ай бұрын
….sold jeti and every other radio…now radiomaster zorro all over…small radio…big screen!!!…
@celeselements10 ай бұрын
Yes, Zorro has big screen, small form factor!
@johanakerblad3398 ай бұрын
Please advise where to buy these mobiles. Will use the display as you did.
@justvic362510 ай бұрын
please, do you know how to add Bluetooth support to Boxer for telemetry?
@celeselements10 ай бұрын
I don't know much about Bluetooth connectivity, but BLE on Boxer board is just a serial port. TX's SYS key->HARDWARE(6/7)->scroll down you can find "Serial port", "AUX1", choose telemetry mirror. I think AUX1 is BLE port. And hardware, like HC-05 or HC-06(check master mode and slave mode availability), attach BLE on Boxer board. HC-05 or HC-06 is needed for setup by USB-UART setting tool. It is huge story, you can search bluetooth on TX16S, it has more information. Otherway, airport function on ELRS, it will be good alternatives.
@alfindo272 ай бұрын
@radiomaster Should hear this improvement 😁
@celeselements2 ай бұрын
Thank you!
@_google_user_8 ай бұрын
Have you tried full RGB color oleds with same pinout?
@celeselements8 ай бұрын
Full color screen is different matter. I'll not try it.
@celeselements8 ай бұрын
Full color screen is different matter. I'll not try it.
@vitorvalerio41839 ай бұрын
do you think it is possible to do this with a Full color tft oled screen? It would be really cool to have a tx16s type screen on a Pocket, especially with touch, I saw some very cheap screens on aliexpress
@celeselements8 ай бұрын
Oh, It is very different matter. I think it would be better to make a small version to the tx16s.
@pakonly70735 ай бұрын
@@celeselements its not supported or difficult? without touch only color tft screen possible?
@PritishPal3 күн бұрын
How to selfcenture in radiomaster pocket stick ?
@celeselements3 күн бұрын
www.radiomasterrc.com/products/pocket-radio-controller-m2 Scroll down and find Check "Gimbal Adjustment". (A L-R To switch M1/M2. Turn clockwise to disable self-centering (Throttle). Turn counterclockwise to enable self-centering (Elevator))
@psikodelriot67548 ай бұрын
Wouldn´t it be possible, to put a RX5808 module inside the rc and connect a TFT-Display to it? Like at the DevoF4/F7, if you remember Walkera. It was really nice to have the 5.8ghz ground station inside the radio. cheerz!
@celeselements8 ай бұрын
Good idea! It is possible.
@user-bb7il2hg2q9 ай бұрын
What oled screen ?
@celeselements9 ай бұрын
1.54" OLED SPI intetface. OLED that I purchased : ko.aliexpress.com/item/32971511348.html?spm=a2g0o.order_list.order_list_main.43.56ba140fDwc9GB&gatewayAdapt=glo2kor
@user-uy5eu8un6t9 ай бұрын
Please tell me how you unlocked the file loader?
@celeselements9 ай бұрын
Please follow this instructions : github.com/DongkwanYi/OLEDBOXER/blob/main/how_to_flash_firmware firmware for pocket : github.com/DongkwanYi/OLEDBOXER/tree/main/firmware All infos are here : github.com/DongkwanYi/OLEDBOXER
@bluenoah010 ай бұрын
You need a 3D printer😀
@celeselements10 ай бұрын
Definitely, good idea, but I have no time for 3D printer. :-(
@MatthewTaylor3Ай бұрын
I prefer concept 1
@celeselementsАй бұрын
Thank you for comment! I like concept 1, too!
@rickikilvi540610 ай бұрын
That's the type of Radio ive been looking for. Now can you add full size hall gimbals and get rid of that right handed scroll wheel cos in the western world not every one is right handed ... unlike China where you treated like a degenerate if left handed.
@celeselements10 ай бұрын
Mounting a full-size gimbal may be difficult due to size issues. Definitely need a back shell for left handed people. Nowadays, there is no prejudice against left-handed people. I'm a right handed, when I play the piano, I think I can make bass sounds louder and faster if I'm left-handed.
@danieldewindt39192 ай бұрын
Where is the code?
@celeselements2 ай бұрын
Please check the description! github.com/DongkwanYi/OLEDBOXER