No video
Two Huge Signs to Make Using Tiling on the XCarve
Рет қаралды 27,626
Күн бұрынMaking signs on the XCarve that are much larger than the machine is a huge challenge. Tiling is the key. Everything must be just right. There is no room for error. I show you how in this video.
Comments or questions My email is: PawPawsWorkShop411@gmail.com
Patreon: / pawpawsworkshop
Link to Z axis and CNC machine kits and parts for DIY CNC
cnc4newbie.com
WOW! 15% OFF offer. Used the code below to take advantage of this fantastic offer.
Affiliate Link to Purchase STARBOND GLUE:
15% OFF PROMO CODE pawpawsworkshop15
www.starbond.com?rfsn=2376834.ca9c16
_______________________________________________________________________________________________
AMAZON AFFILIATE LINKS:
Please consider supporting me with the AMAZON AFFILIATE LINKS. As an Amazon Associate I earn from qualifying purchases. You pay the same for the products that you purchase using these links or on any other products that you purchase and it will help support this channel as well through these links. Thank you for your support.
Link to My Amazon Affiliate Store:
www.amazon.com...
Try Amazon Home Services: amzn.to/2VUdMtZ
Try Amazon Prime 30 day FREE Trial: amzn.to/2YxVQ5c
Replacement brushes for DeWalt 611 Router: amzn.to/2Sknovz
DeWalt 611 Router: amzn.to/2Sp7H6l
90 degree v-bit: amzn.to/2WspRDf
60 degree v-bit: amzn.to/2sYTK0k
Freud bottom cutting bits: amzn.to/2H30R00
Router Bit Set: Router Bit Set 1/4" Shank: amzn.to/2G4iQDH
Oramask 813 12"x10' Roll amzn.to/2VrrUe5
Oramask 813 12"x20' Roll amzn.to/2ViovxQ
@johandahlstrom5347 2 жыл бұрын
I know I'm late, but I love this kind of videos!
@PawPawsWorkShop 2 жыл бұрын
Awesome, thank you very much for watching. I do have a complete Fan Art playlist showing several of these
@averybrooksher 4 жыл бұрын
Awesome work you do. I purchased the 1000 mm X-Carve about a year and a half ago to aide my son's business. He specializes in aluminum welding and fabrication. I haven't done a lot of projects yet, but not larger ones than my machine is capable of without the tiling. This helps a lot. Of course I'm a slow learner, so I'll be watching this video several more times for sure. I have a lot of larger projects I want to do. Thank you.
@PawPawsWorkShop 4 жыл бұрын
That's fantastic! I'm very glad that this tiling video has helped you. Thank you very much.
@user-mj5kv3vj3l Жыл бұрын
Great video! I will be using this technique on my next project. Thank you !
@PawPawsWorkShop Жыл бұрын
Wonderful! Glad the video was helpful
@henrytorres5611 4 жыл бұрын
Couldn’t have done it without you, you have given me more information that many videos I have viewed. Everything video you have done on your CNC has taught me plenty. This is one good information that I can add to my knowledge base, thank you.
@PawPawsWorkShop 4 жыл бұрын
Awesome! Thank you very much.
@robertprice9052 3 жыл бұрын
I would love to see a completed sign. Painted and lit would be a cool up date!
@chuckpigott8682 4 жыл бұрын
Great show more please
@PawPawsWorkShop 4 жыл бұрын
Thank you very much. These projects are finished. I have done three for KZfaq and did eleven all total. If you have specific questions, I will try and answer them for you.
@markmooney2207 2 жыл бұрын
Love it….more please
@PawPawsWorkShop 2 жыл бұрын
Glad you like it. Thanks for watching
@garystovall4225 4 жыл бұрын
I am enjoying these Videos
@PawPawsWorkShop 4 жыл бұрын
Thank you
@centralscrutinizer76 4 жыл бұрын
thanks i am learning a lot watching your videos
@PawPawsWorkShop 4 жыл бұрын
Thank you very much
@user-vx1si6pj5z 11 ай бұрын
Love the project
@PawPawsWorkShop 11 ай бұрын
Thank you very much
@rogerbrown459 4 жыл бұрын
Keep this type of video’s coming, very helpful
@PawPawsWorkShop 4 жыл бұрын
Thank you very much. I'll do it.
@scioli700 4 жыл бұрын
The X Carve is something I'm really interested in so this video was helpful and I liked it and the signs!
@PawPawsWorkShop 4 жыл бұрын
Thank you very much.
@MFunkibut 4 жыл бұрын
Longtime comic book fan and subscriber - keep 'em coming!
@PawPawsWorkShop 4 жыл бұрын
That's fantastic. I will be doing many more over the next few weeks. Come back often. I hope you hit the little bell notification.
@lsflores1976 Жыл бұрын
Awsome video! Keep doing these videos.
@PawPawsWorkShop Жыл бұрын
Thank you very much
@alcampbell3634 4 жыл бұрын
Make more videos like this. Very interesting and skill builder for mr
@PawPawsWorkShop 4 жыл бұрын
Excellent! Thank you very much.
@mmmmmmm8706 4 жыл бұрын
Appreciate the level of detail here, especially the machine setup settings. I'm not doing carves like this yet ... Doing kumiko, Asa no ha projects, but this is still very useful to see the process and machine setups. Actually, I'm not seeing any other sources that are this good. Just putting that out there. Just excellent. I would be interested to see projects that have a range of depths, for example, like some Native American animal carvings that have different depths. Not sure how that would be accomplished, but an area of interest.
@PawPawsWorkShop 4 жыл бұрын
Thank you very much.
@richardjones2489 3 жыл бұрын
Nice work, would like to see more
@keno1226 3 жыл бұрын
Thank you, I will try your method from now on. I have destroyed two test pieces trying to get tiling right on my machine.
@PawPawsWorkShop 3 жыл бұрын
Good luck with it and please let me know how it worked for you.
@xXMJHarvey89Xx 4 жыл бұрын
I'm interested in seeing how you are fastening the letters to the backer board. I enjoy your videos. You've got some of the best X-Carve tutorials on KZfaq. I would be interested in more Videos on this.
@PawPawsWorkShop 4 жыл бұрын
I cut some .5 inch blocks that are .75 inches wide and 1.0 inches long. That way the customer can choose how high he wants the raised letters.
@scottward7415 4 жыл бұрын
Yes I would love to see more of this type of work
@PawPawsWorkShop 4 жыл бұрын
I will be doing more tiling in the future.
@nasa297 4 жыл бұрын
Thank you, Just starting out and I'm finding your videos, priceless......
@PawPawsWorkShop 4 жыл бұрын
Awesome! Thank you very much.
@varinatannis4853 3 жыл бұрын
Thank you. Now I will try to something larger. Awesome tutorial.
@PawPawsWorkShop 3 жыл бұрын
You’re welcome 😊 Great, have fun with it.
@harldave9850 4 жыл бұрын
Awesome. Keep going. The more the merrier
@PawPawsWorkShop 4 жыл бұрын
Thank you very much. I have shown three various ways to do the tiling in the videos. I am afraid it would get boring if I continued to do these on KZfaq. To date, off camera, I have done about twelve of these comic signs.
@rega3160 4 жыл бұрын
This is very informative! Great video Paw Paw.
@PawPawsWorkShop 4 жыл бұрын
Thank you very much.
@ohske 4 жыл бұрын
Woo Good 👍👍👍👌☺️
@PawPawsWorkShop 4 жыл бұрын
Awesome
@timothyloughman5027 4 жыл бұрын
Would like to see more of these projects!
@PawPawsWorkShop 4 жыл бұрын
Excellent! I have quite a few more to do.
@timothyloughman5027 4 жыл бұрын
@@PawPawsWorkShop Thank You!
@dealia7777 4 жыл бұрын
Great job!!!
@PawPawsWorkShop 4 жыл бұрын
Thank you very much.
@dealia7777 4 жыл бұрын
@@PawPawsWorkShop would love to see more tiling...👍
@edwardscheibner7603 4 жыл бұрын
Love the video, please keep them coming.
@PawPawsWorkShop 4 жыл бұрын
Thank you very much. I will do it.
@bentheredonethat9296 4 жыл бұрын
I really enjoyed this one very much!!!!!!!!!!!!!! Thank you, it was VERY VERY HELPFULL
@PawPawsWorkShop 4 жыл бұрын
Awesome! Thank you very much.
@tstodard 4 жыл бұрын
These look even better in person. I’ll send pics of them completed, or if you’d like to make a video of the shop when it’s finished, that would be awesome also!
@PawPawsWorkShop 4 жыл бұрын
That's awesome. I can't wait to see the finished pictures. Yes, I would love to video the shop when it is done. Ninja Turtles is almost ready to carve. It was very difficult to prepare but I think it will be great.
@stevemoloney3430 4 жыл бұрын
As always nice video Phil, Everything I have made and I still have not had the need to tile yet!
@PawPawsWorkShop 4 жыл бұрын
Tiling is a whole different challenge. I have many of these signs to make. I will be experimenting with different types of registration. Too much detail to be off. Thank you very much.
@lVl1GGL3 4 жыл бұрын
I liked this a lot! Keep doing these kind of videos please!
@PawPawsWorkShop 4 жыл бұрын
Thank you very much. I will do it.
@joemartinez5673 4 жыл бұрын
That’s very nice!! I really need to learn how to use my machine and computer so I can make projects like these. Keep me coming!!
@PawPawsWorkShop 4 жыл бұрын
Thank you very much. In time you will be able to do it. Just keep expanding your knowledge one project at a time.
@user-sb9wr2hk1q 4 жыл бұрын
Love it and thanks for all you do! I have learned a lot from your videos .
@PawPawsWorkShop 4 жыл бұрын
Fantastic! Thank you very much.
@AngieWilliamsDesigns 4 жыл бұрын
Great video. Thanks for sharing. I like seeing this project
@PawPawsWorkShop 4 жыл бұрын
Thank you very much.
@davidortiz1899 3 жыл бұрын
Looks great, learned a lot myself on your explanations Dave the Wave
@PawPawsWorkShop 3 жыл бұрын
I'm so glad that this video helped you.
@miketrent7976 4 жыл бұрын
Hi Phillip, Great job, as always! Any yes, I’d be very interested in seeing the signs you’ll make in the future
@PawPawsWorkShop 4 жыл бұрын
Awesome! Thank you very much.
@pbranshj2678 4 жыл бұрын
I'm so damn impressed. Freaking awesome - Thx from Denmark and hopefully a new cnc maker some day ;)
@PawPawsWorkShop 4 жыл бұрын
Thank you very much.
@MrJeffery9076 4 жыл бұрын
thanks for the video. I would like to see more
@PawPawsWorkShop 4 жыл бұрын
Thank you very much.
@thundercracker7981 4 жыл бұрын
I’d like to see more.
@PawPawsWorkShop 4 жыл бұрын
Great. Thank you very much.
@AnthonyFitzgerald55 4 жыл бұрын
How do you seal the MDF before painting. Can you make a video on that?
@PawPawsWorkShop 4 жыл бұрын
Seal it first with shellac, then paint is the easiest way. Yes, I will do a video on painting MDF.
@rickprince7506 3 жыл бұрын
Luv these videos, keep up the good work !!
@PawPawsWorkShop 3 жыл бұрын
Thank you very much.
@arfonia 4 жыл бұрын
Great vid.....Thanks! 👍 Stay Safe..Skully UK
@PawPawsWorkShop 4 жыл бұрын
Thanks, you too!
@rbwoodwork1890 4 жыл бұрын
Good information in the video. I’ve been following you for about three weeks now as I have just purchased a x carve 1000:(boxes arrived today) so trying to Learn as much as I can. Not sure if it was just me or was there some audio difficulties going on? Kinda threw me me off a couple of times. Keep them coming! Thanks. Edit: I went back and watched again and there are two voices at the same time around the 18 min and 21 min marks.
@PawPawsWorkShop 4 жыл бұрын
Congratulations! Thank you very much for following my channel. I have many videos to help you get started. Tiling is a little advanced but is fun to do.
@raulgarza8216 3 жыл бұрын
Great video - Thank you for all the tips. I would like to see a tiling video involving the American flag. I am planning on making a 2 x 4 foot carved flag.
@PawPawsWorkShop 3 жыл бұрын
Use the tips that I show in these fanart videos. The American flag will be easy because the union can be in one section and all the other sections just consist of long lines to form the stripes. Run is along the y axis for the stripes.
@TimberWood.Customs 4 жыл бұрын
Can you please make a video on cutting something on the machine that is larger than the work area?(for example cutting a sign and then flipping at 180° and then finishing the cut.) I tried an easel but every time I flip the sign and go back to the original zero spot, it always is a little shifted. I’m not sure if that is easel or if it’s my error. Could you please try it
@PawPawsWorkShop 4 жыл бұрын
This is a tiling operation. You do not flip it 180 degrees. You move it along the Y axis to a new point and continue the carve.
@TimberWood.Customs 4 жыл бұрын
Will that work with an engraved sign? And is it the most accurate way?
@CANE1202 3 жыл бұрын
This is amazing. I have to do a sign that’s 8 ft long but I don’t think I’ll be able to figure out the tiling portion of it.
@PawPawsWorkShop 3 жыл бұрын
You can do it, just follow the steps. Try something smaller first to get a little practice.
@valtermonteiro1974 3 жыл бұрын
Very top art, please which font of the letters was used in the project?
@PawPawsWorkShop 3 жыл бұрын
This was pulled directly from Google search free clipart
@bicyclerider3978 4 жыл бұрын
Like to see he tiling with positive stops. Like pegs or dowels.
@PawPawsWorkShop 4 жыл бұрын
I tried the dowels and I was able to get more accurate with the method that I showed in the video.
@GotCamel 4 жыл бұрын
Great trick with easel! I didn’t even know it was possible to cut a piece larger than the workspace. Only question I have is why did you choose not to use tabs on the letters?
@PawPawsWorkShop 4 жыл бұрын
Thank you very much. The tabs were an accident. I checked no tabs, however, there were several items that did not get selected thus the tabs were still there.
@mmmmmmm8706 4 жыл бұрын
I'm a beginner, but I found I don't like cutting out the tabs after the carves and so I try to avoid using them. It's easy to make mistakes cutting out the tabs and it's not worth the risk.
@audreyyoung5154 4 жыл бұрын
This is cool but I don’t have any need for this but what I been trying to find is how to build a bookcase Twin size bed because I need to make a bed frame for my kids
@sergeantmaker 4 жыл бұрын
This is a good subject and not many vid on tiling with easel. My biggest hurtle is Inkscape. Great info
@PawPawsWorkShop 4 жыл бұрын
Thank you. I do have plans to do a video on a king size bed with built in end tables.
@kuehnholdbomb 4 жыл бұрын
Awesome job. I’m new to the CNC world and have been watching videos constantly. Very nice job describing all steps in your videos. Wondering though, the tape you use, is it just your regular blue painters tape? Thanks
@PawPawsWorkShop 4 жыл бұрын
Thank you very much. Yes, it is just regular blue painters tape.
@fredwienbarg5051 Жыл бұрын
I learn this stuff from you. Where in th world do you learn it? Makes me feel stupid!
@PawPawsWorkShop Жыл бұрын
Lol, six years ago I could hardly turn on the CNC machine let alone design anything. I learned by trial and error. Back then there was little help available. Each project was a new challenge. I started this channel to help others avoid the frustration that I experienced in the beginning. Even today I continue to push the envelope and experiment. Yes, there are still many failures. I bring to you the lessons learned so that your learning curve is much less.
@fredwienbarg5051 Жыл бұрын
@@PawPawsWorkShop you learn well!
@christic769 4 жыл бұрын
Seems like some audio problems in this last video.
@PawPawsWorkShop 4 жыл бұрын
I did some normal recording and then I did some voice over. The sound is quite a bit different. Thank you
@JBrown-pb8ex 3 жыл бұрын
Hello Paw Paw. great videos and information. was wondering, why the x-carve and not one of the other brands? your videos have peaked my interest in getting a cnc machine and was wondering which machine is best for hobby/micro business possibilities. thanks.
@PawPawsWorkShop 3 жыл бұрын
CNC machines are great. Inventables XCarve is a great beginner CNC and is excellent for the hobbiest. My other machine is the CNC4newbie New Carve. This is a much stronger machine and can easily be run as a small business machine. You can use Easel software for both but you will most likely out grow it quickly and then you can upgrade to something like VCarve Pro.
@JBrown-pb8ex 3 жыл бұрын
@@PawPawsWorkShop thanks for the reply. would like to get the Xcarve or the Shapeoko and then a stiffer frame. seems as though you cannot go wrong with either machine.
@s_m-b_l-z_m7941 3 жыл бұрын
When you do tiling are your numbers always the same for every project
@PawPawsWorkShop 3 жыл бұрын
No, I try to find a easy area with just a few lines as possible and parallel with the y axis.
@s_m-b_l-z_m7941 3 жыл бұрын
@@PawPawsWorkShop ok so I might be doing it right so the formula is the same it’s the numbers that change
@PawPawsWorkShop 3 жыл бұрын
Yes, as long as the number is the same in the computer and on the cnc machine it will work. They must match.
@s_m-b_l-z_m7941 3 жыл бұрын
@@PawPawsWorkShop thank you paw paw
@lunnymav 4 жыл бұрын
What other works do you have on the way???
@PawPawsWorkShop 4 жыл бұрын
Lots of fan art and cabinets to make.
@Silent-G 3 жыл бұрын
When I paint mdf it comes out really splotchy. How can I avoid this?
@PawPawsWorkShop 3 жыл бұрын
Seal the MDF first with sanding sealer or shellac.
@tanddbi2005 4 жыл бұрын
I would not have saved it as an svg file in inkscape....I would have saved it as a cario png file extenstion and brought it into easel that way
@PawPawsWorkShop 4 жыл бұрын
Ok, I will give that a try. Thank you
@juansalmeron1537 4 жыл бұрын
Paw paw, where are u doing you lettering at? I’m going to make an attempt at creating something with your teachings
@PawPawsWorkShop 4 жыл бұрын
I think that is great that you are going to something similar. Not sure I understand the question
@juansalmeron1537 4 жыл бұрын
Paw Paw’s WorkShop I tried to make the style lettering on easel but couldn’t quite duplicate the style
@rbwoodwork1890 4 жыл бұрын
Juan Salmeron I’m pretty sure he imported some clip art for the text, you will have to do a search for what your looking for.
@edwardzorniv5761 3 жыл бұрын
Could you help me tile a project that's 42" I've never done it before and could use some assistance
@PawPawsWorkShop 3 жыл бұрын
I will help if I can. What questions do you have? Have you watched my videos on fan art playlist. I show a lot of detail in those videos.
@edwardzorniv5761 3 жыл бұрын
@@PawPawsWorkShop yes I have I just don't understand how to highlight the image paw paw and I'm trying to make a 14" x 42" sign on a 1000mm table using easel pro. I can't figure it out. Is there a way I can send you the file and you can set it up for me so I can see what you did?
@PawPawsWorkShop 3 жыл бұрын
I assume you are using Easel. Share the file on the forum as a Private Message to me. I'll take a look at it and set up individual workpieces showing the steps.
@edwardzorniv5761 3 жыл бұрын
@@PawPawsWorkShop thanks! On the inventables forum?
@edwardzorniv5761 3 жыл бұрын
@@PawPawsWorkShop how do I share as a private message and put the file in there? I'm new to this. Sorry
Paw Paw’s WorkShop
Рет қаралды 5 М.
Paw Paw’s WorkShop
Рет қаралды 22 М.
24 Канал
Рет қаралды 95 М.