Ty Tessmann Pro Tip: Swaybar Setting

Рет қаралды 47,407

Ty Tessmann

7 жыл бұрын

Ty Tessmann shows you how to properly set your swaybar for the best car performance.

Пікірлер: 25

@damonbeddingfield2958 7 жыл бұрын

Your tips have made a big difference in how my car handles and in my overall race scene. Thank you for posting these videos they have helped me and im sure many others.

@ericgordon4746 6 жыл бұрын

Soft spoken gentlemen! Thank you!

@Shecki603 7 жыл бұрын

Love the video's you and your old man put together! Keep up the good work and thank you!

@tytessmann5842 7 жыл бұрын

Thanks for the support, if you have any ideas for videos you would like to see done let us know.

@TheRCNetwork 7 жыл бұрын

Great video Ty. Love the MIP drivers...

@dreyn7780 5 жыл бұрын

It's wrong information, so shut up uneducated idiot! A 'U' bar is just a straight link from the stable wheel to the opposite wheel which TRANSMITS FORCE THROUGH THE CHASSIS to the opposite end of the car. In REALITY, it can be thought of as being A STRAIGHT ROD WHICH YOU TIGHTEN OR LOOSEN. You can only effect the car's cornering ability for left hand turns OR right hand turns, NOT FOR BOTH turns. You also need to SHUT UP AND STEP AWAY FROM INSTRUCTING PEOPLE! You're an ego maniac and you're uneducated idiot!

@ADVENTUREKM 7 жыл бұрын

I enjoy your videos can you do a video on how you clean your RC after a race?

@j-1lokes294 4 жыл бұрын

Thank you for this tip. But how do you adjust the set screws on the arms ..

@MetroxFX 7 жыл бұрын

Hey ty, i got a Xray xb8 2015 with a FX engine, its pretty good,but the Problem is, that the left drive shaft, is to short, so when i jump, it flips out of the diff.. i don't know why, but all is original and build exactly with the manual.. The driving shaft is original too, and yesterday, i cleaned the whole diff, changed the bear rings, but the Problem is still there.. i don't know what to do now :/

@MrZimeir 5 жыл бұрын

thanks for the video, my sway was set wrong, this helps alot

@dreyn7780 5 жыл бұрын

It's wrong information and you're being terribly educated by this vid maker. Read a book on How to Make Your Car Handle. The Americans published this book and never read it. So now, people from the other side of the planet have to educate you, cause we know everything!

@rcmafia2 3 жыл бұрын

front left tire goes up in the air when I turn and accelerate.. do you know why ?

@diekrabbe847 7 жыл бұрын

Will you drive in germany?

@rcbanyuwangiofficial6004 3 жыл бұрын

Nice

@truckerk 3 жыл бұрын

Wish I saw this a long time ago.

@dirtberger4533 6 жыл бұрын

Thank you. Know I have a way better idea on how to set and check, the key to it.

@dreyn7780 5 жыл бұрын

It's wrong information! Ever heard of a 'Z' sway bar? A 'U' sway bar, if adjusted to effect both left and right cornering, will just ROTATE AROUND THE MOUNTING AXIS and can NEVER be tightened. It will forever remain LOOSE. it's actually a continuous link across the car which MUST BE TIGHTENED to create some effect for cornering. The tighter you adjust the straight link, the more powerful the anti sway effect will become! THAT'S RIGHT! You ACTUALLY GET TO ADJUST SOMETHING to your liking. You're only allowed to tighten or loosen the sway bar from 1 side of the car! You get to choose LEFT SIDE OR RIGHT SIDE. if you choose to tighten from both sides, the sway bar will just ROTATE ON ITS MOUNTS and it can never be tightened. It will always stays undone. Which never improves cornering. IT'S ACTUALLY A MEMBER OF THE CHASSIS not a moving part. It twists and so it must be under some stress. It will NEVER twist if its loose.

@royarsey5429 7 жыл бұрын

you're making Xray lots of sale just being with them..you're the best! i hope you get even share ..hehehe..sure you do..

@nathanball2744 7 жыл бұрын

What was the diagnosis at the dnc final?

@tytessmann5842 7 жыл бұрын

It was a receiver pack battery failure which is strange since it was a new battery for this race.

@jtrace72 7 жыл бұрын

Hi Ty, could you tell why you use so many shims on the steering link at the wheelhub?

@tytessmann5842 7 жыл бұрын

We are still learning the car and trying different settings for bump steer, since having done the video we now use less, we only use 2mm.

@michalmichalsk 6 жыл бұрын

bumpsteer

@dreyn7780 5 жыл бұрын

You're wrong! A 'U' bar in essence is just a straight link from one side to the other and can only effect 1 side of the car. You only can choose to improve LEFT HAND CORNERS or right hand corners. A 'U' anti roll/anti sway bar CANNOT EFFECT BOTH RIGHT AND LEFT HAND CORNERS. 'Z' bars exist for that problem. The rear mounted sway bar pushes the front end back down onto the level setting. The front mounted bar effects the rear of the car. You must go to design school /engineering, to workout this sort of information cause its NOT intuitive. Human ego's can't workout how this technical stuff is happening.

@johns818 5 жыл бұрын

You are 1000% wrong... just delete your comment.