Type-C Charging Port Mod For PSP 1000 [ Solderless ]

Рет қаралды 9,648

Күн бұрын

I have done the unthinkable, installing a Type-C port without using a soldering iron.
Links For Everything Below:
------------
Mentioned Videos
------------
PSP 1000 Disassembly:
• How To Properly Disass...
Solderless LED Mod:
• Sound Reactive LED MOD...
------------
Mentioned Tools & Parts
------------
Pre-Soldered Type-C Port:
AliExpress: s.click.aliexpress.com/e/_DmF...
Amazon US: amzn.to/4btf0PH
Amazon CA: amzn.to/3ww0aIH
Flush Cutter:
s.click.aliexpress.com/e/_Ddj...
Diamond Needle File Set:
s.click.aliexpress.com/e/_Dk0...
Cheap Manual Drill:
s.click.aliexpress.com/e/_Dl3...
Cheap Electric Drill:
s.click.aliexpress.com/e/_DFN...
Xiaomi Wowstick Drill:
s.click.aliexpress.com/e/_Dm5...
B7000 Adhesive Glue:
s.click.aliexpress.com/e/_DCj...
Razor Knife:
s.click.aliexpress.com/e/_DmZ...
------------
Time Codes
------------
00:00 - Intro
00:56 - Failed Experiments
02:25 - Mission Accomplished
I will add more chapters later lol
------------
Discord: discordapp.com/invite/5bsGzq7
------------
Please note: The shopping links above may contain affiliate links. If you make a purchase through them, I may receive a small commission, which helps support the channel. Thank you!

Пікірлер: 58

@TotalKommando Ай бұрын

Share Your Mods Here: discord.gg/VB6ruBEnsm Post Notes / FAQ: - I opted for the bottom location because I want to keep original function, and because it looks cleaner - You can use what you learn in this video, to do it anywhere else on the PSP - Yes I will have a video on how to do it with other models in the future - I will be trying out the replacement of the Mini USB port and / or the IR sensor. - It's not perfect in the video as its cracked slightly because it was done during the experimental phase to showcase the best way to get it centered Plans: Next Mod Videos Will Have To Be HDMI & Battery Testing Video ( Going To Need Full Focus & All My PSPs Running 24/7 ) In the meantime I will probably try to upload something lite. o_0

@Arayadavido Ай бұрын

I'm so excited with how you've managed this project. I definitely will love to see the USB PD with audio and data.

@stevexanny Ай бұрын

Honestly if the original PSP's charger wasn't so long, I would probably do this mod. I just see no point for myself who normally just plays at home and doesn't mind plugging it in when it dies lol. You made the mod look super easy tho!

@TotalKommando Ай бұрын

I agree, I honestly have no problem with the original cable & port, much prefer it over microusb, I got plenty of spares, battery is long enough to not care for my use, its just a nice have type of thing of a project lol

@StaticJuice_ Ай бұрын

Man I’m loving your psp modding series! Amazing quality videos

@TotalKommando Ай бұрын

Thank you, I put my heart and soul into them

@TotalKommando Ай бұрын

Plz hit like and comment, I heard from a goose that it really helps

@davidrikos7903 Ай бұрын

Goose Wayne?

@mantra1229 14 күн бұрын

Keen to see how that power delivery port works! I also bought some needle files to fine tune the port, it's definitely better than trying to melt the hole or using a dremel! I am surprised you are doing this on original shells though, as quite a few members of the community complain if an OG shell is altered damaged, and a third party shell is good for practicing. A friend of mine also made a 3D printed faceplate that goes around the front of the USB C port. You bring the port out 1mm proud and can glue on this face plate and it hides the hole. It makes the port sit slightly proud but in my opinion it looks quite good. Another alternative is to plug something into the USB and use a very fine RTV silicone with a needle applicator to fill in the gaps around the port, then you smooth off the silicone with a cotton tip/qtip

@TotalKommando 14 күн бұрын

I cant wait to get back into 3D printing, got so many ideas in mind I wanna design for. I have a graveyard of 1000 models with non mint parts, lol

@mantra1229 14 күн бұрын

@@TotalKommando It would be good to see how you approach this for a 2000 or 3000 especially if you leave the original port and splice in a new one. I'm busy investigating that right now

@nixtan3139 Ай бұрын

Nice one! Thanks for the tutorial! I’ve just sub to your channel.

@TotalKommando Ай бұрын

Thank You : )

@Yarooooooooooooo12 Ай бұрын

nice job sir/man/dude! i might try this out one day

@TotalKommando Ай бұрын

One day indeed

@juanhermosillo7322 Ай бұрын

Looks clean. RIP to the fallen 🙏

@TotalKommando Ай бұрын

Salute /0 |\ /\

@CHEETAHJDM Ай бұрын

No psp's were harmed in this video 💀

@BlueEyedVibeChecker Ай бұрын

If they could make it also able to use the composite output via USB-C "HDMI" that'd be super neat.

@TotalKommando Ай бұрын

Yea it might be time to experiment and see what can be stuffed into a Type-C port

@adamhughes5678 28 күн бұрын

I wish this could work for the PS Vita

@jackipiegg Ай бұрын

9:51 For your 2nd soldering guide, please experiment on trying to swap that mini-usb to usb-c. Ever since I got a psp decades ago, I feel having the cord at the bottom hinders while playing. If the USB-C is at the top, you could solder the data lines + power from the bottom as well.

@TotalKommando Ай бұрын

It might be on a third attempt lol I don't like removing original function if I ever want to use an OG accessory but will def be looking into it

@jackipiegg Ай бұрын

@@TotalKommando WHY?! The only notable OG accessory is RCA cable which uses the 3.5mm jack. The mini USB is useless! Swap it please!!

@TotalKommando Ай бұрын

@@jackipiegg lol what happened to the camera or gps or tv modules : ) I will still attempt it nevertheless so dont you worry

@jackipiegg Ай бұрын

@@TotalKommando LOL first time hearing those exists, but yea I don't think anyone will use any of those ever again since phones exists. Please do! I will follow your footsteps since you will be the first ever on youtube/internet that does it. I'm not brave enough.

@angrakamelot 7 күн бұрын

Broooo i'm waiting sleepless for that usb-c with smart port, data lines and audio, sweet Jesus! Imagine those fast transfer speeds, daaayum!

@TotalKommando 7 күн бұрын

transferspeeds are going to be the exact same usb 2.0 lol

@angrakamelot 7 күн бұрын

@@TotalKommando 😞

@angrakamelot 7 күн бұрын

@@TotalKommando would it be possible to fast charge if you add a pd65w fast charging module? I'm in my most sane moment jajaja

@TotalKommando 7 күн бұрын

@@angrakamelot perhaps if one can add a dedicated second charging module that you have to disconnect via switch to do pd lol

@karolrosen9693 24 күн бұрын

Waiting for the upcoming video with a USB-C port o PSP incorporating more functions as you said in this video. In the end, you left the original charging port not connected, right?

@TotalKommando 24 күн бұрын

Yea cant wait to get into that project, in the end of the video for the "Solderless" method I did leave the charging port not connected, but since then the psp is left in parts. Once I do it again, I plan to keep the original charging port function as I still want it to work like stock on old accessories : ) I want to add function, not remove as much as possible

@francislopes1478 Ай бұрын

This is great, and this tutorial can be used for the other models as well right? since the charging port is the same no matter the model.

@TotalKommando Ай бұрын

Yea you can adapt the methods learned here to use on other models. The only thing you will have to figure out is where to exactly cut to end with a clean result. I will have shorter quick videos for other models once I do them.

@majortom87 Ай бұрын

It definitely doesn't seem like a beginner's solution, you should try a USB C PD to Power Connector Universal, and you would have the same result

@TotalKommando Ай бұрын

Yea ended up being more complicated than expected lol You could get the little adapter but you will have to remember to take it with you at all times, could be lost I may give the side USB idea another attempt for the sake of simplicity, but its placement is not optimal.

@_haru_na Ай бұрын

Could this be done with a 3000 model instead of the 1000? Thanks!

@TotalKommando Ай бұрын

I will attempt it in a future video

@_haru_na Ай бұрын

@@TotalKommando thank you very much!

@EiadunIslam Ай бұрын

Brother can you tell me where I get psp street glass lens.. AliExpress have only 1000-3000 model. There is no psp street glass...so where I get it.. please send me a link .

@TotalKommando Ай бұрын

I used the same lens for my street model from the 1000-3000 link is in my glass lens video

@EiadunIslam Ай бұрын

@@TotalKommando Oh I see...but I saw in your video the street glass was cutted tow times. where psp 3000 model glass are not same..will 3000 glass fit on street model.?

@Mohammed_x Ай бұрын

can you try doing the type C mod on the psp go ?

@TotalKommando Ай бұрын

Eventually I will have a video on that

@uruguayooolocoo6656 Ай бұрын

this mod look cool! is there any way to put the USB-C Port on the charging port part?

@TotalKommando Ай бұрын

I mention in this video, my goal is to keep original function, but yes you can do it, I just don't like how it looks and requires heavy modification to the case. You can use what you learn in this video to do it anywhere else you want.

@hitbox2381 Ай бұрын

Yes, you can do this too (you can even find a video on this modification on KZfaq), but it doesn’t look very good. Therefore, the option in this video is one of the most optimal

@IbadGrammarX Ай бұрын

i want vita type c mod

@TotalKommando Ай бұрын

Will make it happen once Im done with PSP mods

@ArthasProVEVO Ай бұрын

The Solution is looking for a Problem 😂😂, man i really appreciate you trying it but that original charging port is already 360 Rotatable , much reliable than 2 sided usb C,

@TotalKommando Ай бұрын

Yea I know lol, personally I dont mind the OG port at all lol

@ExoLane Ай бұрын

ain't no way 😭

@TotalKommando Ай бұрын

ya-uh

@DaOptimus1 6 күн бұрын

Way more complicated than it needs to be with that you've done just for charging a psp with usb c. People are going to destroy their psp like the way you've done. I wouldn't recommend following this. 😢