Sir please CAPA video.

Please respond

Ok i will do

sure bro i will do

What should i do

Cad Software learning is good option and you may also get training about Quality System Documentation it will also benificial for you Best wishes for your future

Sir please tell me what is this documentation..

@@AskMechnology thanks for respond sir

Documentation includes all documents which covers under Records of Quality Dept. Production Dept. or Maintenance Dept. like PPAP, APQP, CAPA Report, 8D, 7QC Tools, SPC, MSA, Why Why Analysis, PPM Trends, OEE, MTBF, MTTR, 5S, Kaizen etc.

First of all inside micrometer is limited to depth of bore on the other hand bore gauge has long Dial Mounting Bar with anvil. And second after setting bore gauge use can measure identical no. of parts quickly and accurately with bore gauge on the other hand with micrometer we have to open and close it every time for checking bore and also it may give you non precise readings due to non identical pressure using during measurement and it is also time consuming. So to get accurate measurement during production we use bore gauge

@@AskMechnology Thanks alot..nd ur way of teaching is awsm.keep it up👍

Product Audit me hum Step by step means process wise part ko inspect karte h product jese jese bnta h harek operation me or layout audit me hum finished part check krte h finished/final drawing ke sath

First of all Layout audit nhi hai blki ek type ki inspection h jisme final product/ part ko design record (ballooning drawing) K according sabhi dimensions, functional test , physical test etc. Ki inspection krte h. Lekin product audit ko Internal Auditor ke dwara as per plan Control plan k according incoming se Dispatch tk jitne v process h un sabki audit krte h.

Jb hum likha padi kar ke record maintain krke inspection ya checking krte hai usse audit bolte hai