Typical Reinforcement in a Concrete Beam

Рет қаралды 132,965

Күн бұрын

Hi guys, this is Structures Explained, and in this video we are going to discuss about typical reinforcement detail in a concrete beam.
Reinforcement are essential part of a concrete beam. It resists tension forces, increase the compression capacity, enhance ductility and reduce long-term deflections in the concrete.
Additionally, reinforcement prevent cracking of concrete due to shear stresses, shrinkage and temperature stresses.
First we will see the reinforcement distribution in a single span beam and later we will have a look at multi span or continuous beams.
Types to reinforcement covered in this video are: Bottom bars, Top bars, Side bars and Stirrups.
More such videos on reinforcement will follow on this channel, so do subscribe and hit the bell icon to get notified every time we upload a new video. Also check out other related uploads on the channel.
Shear: • What is Shear Force / ...
Torsion: • What is Torsion?
FOLLOW US ON
Facebook 👇
/ structuresexplained
Instagram 👇
/ structures_explained
LinkedIn 👇
/ structuresexplained

Пікірлер: 44

@StructuresExplained 3 жыл бұрын

Creating videos takes lot of time and effort. If you want to support such videos and keep the channel sustainable, please consider below options: 👉 Join Channel Membership: kzfaq.infojoin 👉 Support directly via PayPal: www.paypal.me/StructuresExplained 👉 Applaud (if available in your region)

@kennyomega8937 Жыл бұрын

Bro which software you used to make this video

@jayantkhare109 Жыл бұрын

Thank You, Saw all your videos on columns, beams and stairs. Excellent explanation with lucid video. Brief and concise. Its a great help for non engineers to understand construction. A must see for all those who are planning to start constructing their houses. once again ,Thanks and great job.

@rustycarpenter1219 22 күн бұрын

Great video

@Waynechester_ 3 жыл бұрын

Earned a sub, thanks for this!

@TheLazyGuyWay 2 жыл бұрын

Excellent explanation thank you for sharing

@user-vt1ii1km4o Ай бұрын

wonderfull Sir

@rameshbs5595 Жыл бұрын

Very nice informative

@oneperspective8601 2 жыл бұрын

Excellent.

@civilengineeringfromgoldme3074 Жыл бұрын

Well explanation

@murxart8323 2 жыл бұрын

Really good explanation 😃

@adilmj 3 жыл бұрын

Easy abs clear explanation

@civilengineerchannel1027 2 жыл бұрын

Good job!

@JulianMakes Жыл бұрын

Very nice

@romelynbonghanoy900 7 ай бұрын

So amazing

@mahendradas1598 Жыл бұрын

Excellent explanation but, should be more details about top bars or Crank bar for continuous beam

@nitishrai9935 3 жыл бұрын

Thanks for video

@StructuresExplained 3 жыл бұрын

You are welcome!

@user-bb1hj8xv4q 4 жыл бұрын

Go on sir wonderful explanation

@civilsitework9058 3 жыл бұрын

kzfaq.info/get/bejne/hLeYnpOh28-2cWg.html

@deepalin3785 2 жыл бұрын

I liked the Video

@arjunabernard8192 2 жыл бұрын

Thank you for the video. Do the stirrups need to extend all the way to the lower reinforcements or can they terminate to another reinforcement just above them?

@ruffamaerobles3615 3 жыл бұрын

wow!!

@ashishvardekar1746 4 жыл бұрын

Good going sir,,👍

@civilsitework9058 3 жыл бұрын

Subscribe for more videos kzfaq.info/get/bejne/hLeYnpOh28-2cWg.html

@dennisromero5618 2 жыл бұрын

Nice vids very informative, sir may i ask what is the minimum or standard height of tie-beam from the footing foundation? many thanks for the feedback..

@WWYG316 Жыл бұрын

How do they workout the bar thickness?

@internalstory 2 жыл бұрын

Make a video about reinforcement of cantilever beam.

@user-zq9wc7cy8p 9 ай бұрын

Hi. with what software do you make these videos? Thanks in advance.

@liboy9844 Жыл бұрын

Will the beam be more rigid and resistant to sagging if stirrups are arranged diagonally to form triangles as done with steel trusses?

@robertweekley5926 Жыл бұрын

Also, placing Rebar bent in a soft "z" shape, as in 1/3 length Flat, 1/3 Bent 30° to 45°, and last 1/3 Flat (Horizontal), to both form a Truss like connection, and tie to upper and lower rebar together?

@PBS-nm1uu Жыл бұрын

what is the spacing for the stirrups??

@Innotutorial 3 жыл бұрын

Good video sir. Please what software are you using to create these video?

@Layput 3 жыл бұрын

He said Blender.

@Innotutorial 3 жыл бұрын

@@Layput ok thanks

@sanguine6071 4 жыл бұрын

It's a nice video but I would like to correct you here that...You said when depth is more than 900 mm than we provide side face reinforcement but as per IS CODE : 456-2000, CLAUSE - 26.5.1.3 ,Pg no. - 47...It is clearly mentioned that if depth > 750 mm then we have to provide it and the spacing between them should not be more than 300 mm.

@StructuresExplained 4 жыл бұрын

Hi Bhanu, thanks for your comment. Quoting from the video "These reinforcements are generally provided to deep beams which have depth higher than 900 mm or 36 inches. This value of depth differs from code to code." it is mentioned that the depth value differs from code to code. The value of 900mm is provided in ACI318 and you correctly pointed out that IS code mentions depth as 750mm.

@sanguine6071 4 жыл бұрын

@@StructuresExplained thanx for the information and reply

@CivilAbhyaas 3 жыл бұрын

Beautiful conversation... I would like to add something. In case of torsion in beams as per IS:456:2000, THIS DEPTH IS 450 MM ONLY.

@CivilAbhyaas 3 жыл бұрын

750 mm is for flexure only....