How to Build a 700whp 6.0 LS

Рет қаралды 494,850

2 жыл бұрын

Instagram: @tyrefryer95
Merch: tyre-fryer.com/
Music provided by RockSounds; / @rocksounds-nocophyrig...
LS9 Head Gaskets; Brian Tooley Racing LS9 Cylinder Head Gaskets MLS PAIR Turbo Multi Layer 4.100 Bore www.amazon.com/dp/B077H61PNP/...
Front and Rear Cover Alignment Tool: Front & Rear Cover Billet Alignment Tool Set with Oil Pan Front Cover Alignment Tool for GM LS Engine 4.8 5.3 5.7 6.0 LS1 LS2 LS3 LS6 L99 LS4 LS9 LSA www.amazon.com/dp/B08X4QL2TV/...
Camshaft thrust plate: Mr Gasket 61220G Camshaft Thrust Plate Steel Camshaft Thrust Plate O-Ring Seal Molded On Back Incl. 4 Mounting Screws Camshaft Thrust Plate www.amazon.com/dp/B077VNXCYQ/...
ARP Rod Bolts: ARP 2346301 Gen III LS Series Small Block Rod Bolt with Cracked Cap Design www.amazon.com/dp/B002SXPWU0/...
ARP Head bolts: ARP 1343610 Stud Kit www.amazon.com/dp/B001D0J5HU/...

Пікірлер: 648

@trevor1053 2 жыл бұрын

What cam is that?

@TyreFryer 2 жыл бұрын

It’s a summit racing stage two boost cam www.summitracing.com/parts/sum-8706r1

@bmanclassics4350 2 жыл бұрын

@@TyreFryer id try the tx speed stage 4.. u won't be let down...

@johnsalisbury3768 2 жыл бұрын

It’s the big zoom zoom bumpy lever

@superior3384 2 жыл бұрын

So are you putting turbos in it. Is that how the 700hp?

@TyreFryer 2 жыл бұрын

Yessir. I probably should’ve specified that in the video. Should make that at 15-18 but if not I’m gonna turn it up till it hits that

@paulhernandez5712 2 жыл бұрын

"This motors already been through a fire so I figured it's already been heat treated" SUBSCRIBED!

@TyreFryer 2 жыл бұрын

😂😂😂😂

@tubehead8203 2 жыл бұрын

🤣🤣🤣🤣🤣🤣🤣🤣

@DeezGarage Жыл бұрын

Exactly what I thought lol

@TheBigz1020 Жыл бұрын

He got mine too

@terrylinellc5550 18 күн бұрын

😂😂😂

@deeshack79 2 жыл бұрын

This was one of the most simplest, yet fully descriptive tutorials i think I've ever seen. You kept it very simple, yet covered all the major details I've had questions on. And very simple tools used. Like, I could actually see myself doing this in my garage without all the fancy pricey gimmicks. I really appreciate this video!

@doublecheeseburger1712 2 жыл бұрын

The sound of the rod scraping the cylinder....priceless

@68Swiftshifter 2 жыл бұрын

Probably at 04:40, hard to believe but that --awesome-- *squeeeeal* is from the piston teetering on the rod, bone-dry. Crazy loud (and will scare the shit outta' you, first time you hear it)

@t.s.racing 2 жыл бұрын

Guys, that was the wrist pin in the pin bore of the piston. I feel really bad for the guy building it. I truly do. T.S. RACING

@bishop5166 Жыл бұрын

@@t.s.racing ...why feel bad? This guy obviously knows his shit... you obviously don't.

@danieljames5875 Жыл бұрын

Did anyone see any oil go on the rings or the piston to bore serface?

@thekid3770 Жыл бұрын

Dude I busted out laughing that was hilarious

@markwallace5274 2 жыл бұрын

Installing pistons and rings with a flat head screwdriver that brings back memories from 20+ years ago as a teen building go kart engines 😂 I’ve never seen anybody else do that since so that was pretty cool 😎

@squarebodybuilder 3 ай бұрын

This took me 20 youtube videos to explain all these steps and you did it in 21 mins! Great job

@TyreFryer 3 ай бұрын

I probably should’ve been a bit more detailed, judging by the comments 😂😂

@squarebodybuilder 3 ай бұрын

@@TyreFryer I recently started a car KZfaq channel and every comment is "You should've done it like this" "I'm smarter and know everything" It's never from fellow channels always people that like the sound of their own voice. 🤣 I'm shocked your channel hasn't blown up way bigger than it is. cheers!

@TyreFryer 3 ай бұрын

@@squarebodybuilder I’ve been taking some time off to get set up a little better. I’m getting ready to build a garage on my own land 😁

@justing7880 Жыл бұрын

Very good video. I love the fact that you took the instructions down to the simplest processes for those that may not have ever tore into an LS or Vortec. A lot of times, they're taken for granted because it's assumed every one watching knows them. Very well done. I'm subscribed now.

@scottdickson7047 2 жыл бұрын

WOW!!! I watched the entire video. Perfect length. Perfect time lapse. Perfect commentary. I loved it thank you! I never really thought to bring my engine back to life (threw a rod over 15 years ago)… I don’t even remember if it was out the oil Pan or destroyed the block?!?! …after watching this I think I might look into some local engine rebuild shops to weigh my options. Thanks again!

@TyreFryer 2 жыл бұрын

Thanks dude! I appreciate the support!

@jondoe4667 2 жыл бұрын

I ran some cheap aftermarket lifter trays one time and had all kinds of problems. They were too soft to keep the lifters from turning. Lesson learned and now I use factory ones every time. 👍🇺🇲

@chandlerfrazier 2 жыл бұрын

I know it's simple as hell but thank you for covering the initially timing part with the cam chain. A lot of people don't care to show that.

@TyreFryer 2 жыл бұрын

Yeah no problem. I tried to show everything important but also keep it moving

@MintMonte87ACSS312 Жыл бұрын

@@TyreFryer I heard ls are the easiest engine for building? Would you say that’s accurate for a first time builder? Just bought my dads 08 Silverado with a bad lifter and I want to make it a street family hot rod.

@TyreFryer Жыл бұрын

@@MintMonte87ACSS312 the gen 4 engines are a little bit more complicated due to afm and dod but they have better internals. I’d say you’re gonna be fine, just do a bunch of research.

@MintMonte87ACSS312 Жыл бұрын

@@TyreFryer from what I heard you gotta delete them both?

@TyreFryer Жыл бұрын

@@MintMonte87ACSS312 yeah it’s just economy and emissions related garbage. Gm did a horrible job with their R&D on both systems.

@elmackie3842 2 жыл бұрын

No fancy tools. Just straight build. Subscribed

@lastchancegarage 2 жыл бұрын

Soak the lifters in Royal Purple for two weeks but slam the pistons in dry without a ring compressor. Great "how to" information.

@taylorwhiting5732 2 жыл бұрын

He didn't just slam them in he used a screw driver to help!

@robertdillon4491 2 жыл бұрын

I liked the screech as the connecting rod slid down that freshly honed cylinder bore.

@ufcpubg1964 8 ай бұрын

@@robertdillon4491the bore job was a hack job so mehh does it really matter

@jeffhoyle7900 7 ай бұрын

I've been building engines since I was 15 and never heard of anyone using wd40 to hone a cylinder or just a screwdriver to install pistons also without lube on them. Only a hand full of problems I saw. That engine will be lucky not to blow on first start.

@goldking1438 7 ай бұрын

I repeat Do NOT SOAK BRAND NEW LIFTERS. DO NOT JUST LUBE THEM UP. U RUN THE RISK OF BREAK PUSH RODS DUE TO STIFF OVER PUMPED LIFTERS. THISMAN WILL COST U

@803brando 2 жыл бұрын

i usually drill a hole in the rear seal cover after its aligned and torqued. a 5/16 dowel pin in two spots, drilled a few thousandths smaller, and tapped in. those long oil pan bolts and the two extra transmission housing bolts can pull that rear cover down and distort seal giving you a leak.

@levibaker9692 Жыл бұрын

Tons of good information, not really explaining the distinguishing factors of why this engine is so good but its a beast.

@DevinM420 2 жыл бұрын

thanks for the good vid bro planning on building a ls3 for my camaro this winter

@Zelaznogsiul-63 2 жыл бұрын

I rebuild a 350 bored 40 over, put new pistons Edelbrock heads, Comp camshaft, edelbrock rpm intake and so on. The engine starts runs and all that, but it has the power of an old v w bug, I sure suck at rebuilding engines but it was my first one. I am going to take it to a mechanic to figure things out. Great video.

@rjminton534 2 жыл бұрын

Thanks for showing in detail I have never tore down an engine and rebuilt one. Maybe one day I will try. I have an old lt1 it’s in a custom cab yoder just the 700r4 trans went out.

@briddy103 2 жыл бұрын

Cool hope you get to it and do it

@TyreFryer 2 жыл бұрын

You may want to look into a 4l80 swap

@fastlanefirstautomotive6121 2 жыл бұрын

Uuuu

@bmanclassics4350 2 жыл бұрын

4L80 swap circle D trans

@danielapodaca82 2 жыл бұрын

Absolutely love your style brother. Well executed on describing what your doing. I need a partner like you. Keep up the good work. It’s hard to find knowledge able people like you that actually do shit worth while.

@TyreFryer 2 жыл бұрын

Thanks dude! Appreciate the support!

@danielapodaca82 2 жыл бұрын

@@TyreFryer you da man!

@nunidee72 2 жыл бұрын

Best build knowledge I ever watched 🙌🏼🙌🏼🙌🏼🙌🏼

@codithheretic110 2 жыл бұрын

this guy won't buy a ring compressor but he's got the timing cover alignment tool. just bustin your balls man! good vid!

@kurrentevent 4 күн бұрын

😂

@markraber4419 2 жыл бұрын

Awesome video Jason!

@Chapowil_n 2 жыл бұрын

6.0 swapping my truck in the future thank you for making this video 🦾

@philipjohnson2608 2 жыл бұрын

Great. Video brother. Only the best of luck with all you do man👍

@xravenhairsexgod 2 жыл бұрын

Just put my 3rd Gen Z28 in the garage for the winter. Looking forward to invaluable content. Subscribed. 🔧

@TyreFryer 2 жыл бұрын

Nice! I’ve been busy with some other things lately but I’ve got a few videos to edit, so more content should be coming soon

@tramsey-kh5gd 2 жыл бұрын

This was sweet to watch considering I’m nearing finishing up a similar build of my 72 c10 4.8 SBE sloppy stage 2 pac 1218’s th400 RMVB transbrake 7875 VSR hooker hot side Aeromotive FPR a1000 pump all AN everything, terminator X etc. gonna be fun haha

@TyreFryer 2 жыл бұрын

Yeah that should be pretty rowdy!

@nopleaseno2515 2 жыл бұрын

I just finished a 5.3LM7 swap in my 68 C10 short bed. BTR stage 2 truck cam, long tube headers and a 2500 stall converter. Nothing like yours but I do take a lot of turns sideways. Enjoy! ✌️👉

@bigsmooth590 2 жыл бұрын

Thanks for all the info man. Great job!

@BMW.535d 2 жыл бұрын

Cool project 🤩 Thanks for sharing

@T0NE05 2 жыл бұрын

Awesome walk thru. I feel like I can rebuild/refresh a 6.0 when I’m ready 🙌🏽

@gordocarbo Ай бұрын

Dont do it like this!

@patrickr2686 2 жыл бұрын

Simple call Texas speed

@josefastboats5874 2 жыл бұрын

LOL. I love this comment

@stevekrahn9707 2 жыл бұрын

Rather spend more time here than WD!!!! Very happy I found you J!!!! Keep up the good content!!!! God bless you and yours!!!

@TyreFryer 2 жыл бұрын

Thanks for the support bro

@teal_2v338 2 жыл бұрын

I knew you were that guy! I was like oh mine isnt the camera man with wd?

@user-tu6fq1yd8i 7 ай бұрын

Ur supposed to keep the hone spinning in the bore when u remove it. You will scratch the hell out of ur cylinder wall doing that. And always lube ur pistons before installing them.

@GraciaYVerdad901 2 жыл бұрын

Awesome video the best and exactly what I was looking for. Thanks a lot !!

@TyreFryer 2 жыл бұрын

No problem bud

@keithseiwert2256 2 жыл бұрын

One of the best in detail step by step I've seen. Very clean and clear thank you

@TyreFryer 2 жыл бұрын

I might start doing how to’s a little more often, I can’t stand most of the ones out there

@jasonsampler9023 2 жыл бұрын

Looking forward to seeing the turbo setup! I broke the crank in my 350 in my squarebody, I'd like to build a turbo LS for it I think, seems like the best bang for the buck

@TyreFryer 2 жыл бұрын

It’s a pretty good value which is why everyone has one lol. But they’re fun. Pretty simple to work on too. And somewhat reliable

@gordocarbo Ай бұрын

Boost your 350 why do a conversion?

@user-xu1nj5zk3c 3 ай бұрын

Very detailed but straight to the point video honestly feel confident building mine by simply watching this. MORE PLEASE!

@gordocarbo Ай бұрын

This is how not to build.

@puppetmasterblaster 2 жыл бұрын

Liked and subbed. Have a 6.0 in the garage all stripped down, this will be perfect for me!

@Ben-Y2K 2 жыл бұрын

Enjoyed wtatching. Looking forward to the next video. 💯

@TyreFryer 2 жыл бұрын

Thanks bud!

@Ben-Y2K 2 жыл бұрын

💯

@BradleyBeeksAdventures 2 жыл бұрын

Nice video man, your for sure good at what you do 😎

@TyreFryer 2 жыл бұрын

Thanks dude I appreciate it!

@BradleyBeeksAdventures 2 жыл бұрын

@@TyreFryer no problem keep the good content coming! I been trying to stay at it with weekly post but hard working full time and 3 kids 😂

@kailingreene7759 2 жыл бұрын

Going to use this step by step to rebuild my G8 6.0

@christophercarson4310 Жыл бұрын

Please dont.. This video is a clinic of what not to do when building an engine...

@OrthodoxGolf114 2 жыл бұрын

You did so good with all the steps bro now show the drop in engine process

@TheGamingGeek2001 2 жыл бұрын

Love your style of building/video man, I've gotten tired of watching the "low buck" builds where they're in their fully outfitted garage using brand new parts that don't need replacing

@TyreFryer 2 жыл бұрын

Thanks dude!

@duramax. 2 жыл бұрын

I feel if you went just a tiny bit more into specs I would go out and rebuild tonight lmfaoooo damn good job

@TyreFryer 2 жыл бұрын

I’ll probably make a video covering the full specs

@LilBubba-xj5cg 2 жыл бұрын

Man I wish somebody would do I can go out n buy a used one n build it to

@draculaslots3870 2 жыл бұрын

Damn you basically just thought me how to build a ls motor :) atleast the most part of it. The timing part very cool. Keep up the great videos

@gordocarbo Ай бұрын

Not really..

@shockr9959 2 жыл бұрын

Awesome video. No BS!!

@bradycook8199 Жыл бұрын

Where have I seen you before, and love the vid it gave me a lot of information

@rarefruit2320 Жыл бұрын

You made it look so easy I decided to do this for lunch

@markcervantes3273 2 жыл бұрын

I was wondering where I recognized you from lol your entire persona is different. Awesome video!

@dylan-ym4pj Жыл бұрын

Awesome information man love the video

@TyreFryer Жыл бұрын

Glad you enjoyed it

@jdonez8347 Жыл бұрын

Appreciate the knowledge my brother 🙏 💯. New subscriber earned for sure.

@Thegoose95 2 жыл бұрын

Damn I’ve never put pistons in by hand like that😂 that’s hardcore. I have a lisle ring compressor that’s like 20 years old that works like a charm.

@vitovato5342 2 жыл бұрын

When you see that you method you know he’s a gear head

@gordocarbo Ай бұрын

@@vitovato5342 Really? Compressor is quicker and no broke rings.

@williebateman3613 2 жыл бұрын

Yea you’re the man bad azz bro 💥💪🏾

@ekitching 2 жыл бұрын

Great job man. I didn't realize the LS was such a simple engine to work on, seems easier than a sbc or bbc. Obviously a great design. Now it has me thinking about going to this type of engine, but I have already invested a lot of money in big block stuff. If it was me, I would have first had the block and heads thoroughly cleaned and painted.

@Russell_and_Rosko 2 жыл бұрын

SBC and BBC are amazing platforms. Only if the vehicle is really light, under 3000 lbs, or you need the efi/efficiency/convenience would you benefit from the change in platforms. If you build the motors and race them, sbc and bbc both have more aftermarket support than you can ask for and they have unlimited power potential.

@TOMVUTHEPIMP Жыл бұрын

@@Russell_and_Rosko LS engine is way better engine than SBC.

@deepfreeze8918 Жыл бұрын

@@TOMVUTHEPIMP it’s not that it’s so much better. It’s just cost to power ratio. Same way the newer stuff will be years down the road

@gordocarbo Ай бұрын

nd machined esp being in a fire! Keep the BB better starting point. Dont need much boost to really move.

@izakwasserman2887 2 жыл бұрын

lifter trays are put in backwards they go the other way if you have a gen 4 engine block youll see the bottom of lifter tray goes around the notch in block

@murph2521 2 жыл бұрын

Awesome video brother

@davidtappe5337 2 жыл бұрын

I torque everything as well, lifter trays snug till feels 👍!!

@319speed 2 жыл бұрын

Didn't know he had his own channel! Nice!

@lloydjoseph6546 2 жыл бұрын

This video made me subscribe I’m trying to decide between a 5.3 or 6.0 Plus you gave alot of information

@TyreFryer 2 жыл бұрын

5.3s work pretty well around the 550-600whp range on a stock bottom end. If you have a lightweight platform like an s10 or a fox body they work really well

@lloydjoseph6546 2 жыл бұрын

Thanks a lot 🙌🏼

@TyreFryer 2 жыл бұрын

You working on a car?

@lloydjoseph6546 2 жыл бұрын

Silverado my dream truck.

@dorian8876 2 жыл бұрын

Great stuff 👌

@EliAngwin Жыл бұрын

Being mostly involved with Ford module motors- I’ve never really taken the time to check out a LS- while the the mod motors are pretty simple- the LS is weigh more simple than I would have thought...

@baldeaglegarage 2 жыл бұрын

Great video!

@Chris-uk8fn 2 жыл бұрын

Great vid 👍👍👍

@gen3camry 2 жыл бұрын

How come you didn’t want to reuse bent push rods? 😂 glad to see a new video out brother!

@TyreFryer 2 жыл бұрын

Hahah I’ve done that one to many times

@unamaxpeedingrods4436 2 жыл бұрын

engine rebuils begins again. cool

@dmlandscapedesignllcatlant8093 7 ай бұрын

Just add 13lbs of boost and 85lbs injectors and a 450 pump done no gap required no tear down required the lq4 have low enough compression to lice comfortably😊

@jacevincent2574 Жыл бұрын

9:30 Wish I wouldve seen this when I was doing my first cam swap! Didnt use any loctite on these bolts and they backed out about 15 minutes after the first start and sent the valves through the pistons 😂😂

@joemamastinks Жыл бұрын

This one s definitely a budget rebuilt.. thanks

@brandonlindell5306 2 жыл бұрын

Let's Goooooooooo!!!!!!!!! Look forward to the content!!!!!!!!!!!!! Frying tyyyyyyyrrrrrrreeeeeeeeessssssss!!!!!!!!!!

@TyreFryer 2 жыл бұрын

They’re bout ta get cooked

@DE-ok4ld 2 жыл бұрын

Nice Video!

@samspeed2531 2 жыл бұрын

“Heat treated “ Good stuff!

@TyreFryer 2 жыл бұрын

😂😂😂

@scottdickson7047 2 жыл бұрын

I liked “that’s 106 in lb” --looked like 108 to me hahaha

@355east3 2 жыл бұрын

Had no idea you have your own channel or that your a truck guy right on man!

@TyreFryer 2 жыл бұрын

Yessir 🤙🤙

@garymaya1767 2 жыл бұрын

Very complete! 😀

@bigcountrykimp2638 2 жыл бұрын

Nice truck brother I wanna see what it does on the track

@perrykatie2014 2 жыл бұрын

Great video

@devonnile7978 2 жыл бұрын

wow i didnt even know you had a youtube channel deffietly watching more

@jrobbmedia2865 Жыл бұрын

THANkS FOR THE STEP BY STEP 💪🏾💯

@hotrod76. 2 жыл бұрын

Nice.!!!! Good job

@derekzastrow5548 2 жыл бұрын

That cam retainer tip is a great one! I’m guessing if that seal leaks the cam bearings would be the first to go??

@TyreFryer 2 жыл бұрын

Yeah not to mention the lifters would probably collapse

@deemoney90 2 жыл бұрын

finally someone that doesn't hone with the dingleberry tool!

@GeekdOut 2 жыл бұрын

The way you explain things reminds me a lot of @TaylorRay

@AverageJoeBuilds 2 жыл бұрын

Stoked for this hp race my guy 🤣🤣🤣

@TyreFryer 2 жыл бұрын

Let’s do it boi

@AverageJoeBuilds 2 жыл бұрын

@@TyreFryer I'll let you catch up a bit, gives me an excuse to finish one of these 7 other projects on the channel 😅 then it can be on like donkey kong

@TyreFryer 2 жыл бұрын

Bettt!

@JohnGrahambeehive 2 жыл бұрын

Brilliant back to basics video, sort the sound of you can? No worries if you can’t I’ll still watch twice 😝

@TyreFryer 2 жыл бұрын

Music too loud?

@JohnGrahambeehive 2 жыл бұрын

@@TyreFryer no no music fine , the quality of your voice it’s not brutal but would be nice if it was better, you are going through a serious amount of detail so it would be nicer to hear you better

@TyreFryer 2 жыл бұрын

@@JohnGrahambeehive I’ll try to find a better mike

@bulletproofpepper2 8 ай бұрын

Thanks for sharing.

@briangarity6336 Жыл бұрын

Jason!!! How are you? Was wondering what you been up to, hadn’t seen you in any WD videos in awhile. Looks like you know what you’re doing. Stay well brother!!

@dustylittle9584 2 жыл бұрын

Thought I recognized you from somewhere. Soon as I knew where from, I hit subscribe.

@rgarciatrash2treasure892 2 жыл бұрын

Holy oil Batman. Ever use assembly lube Lol. Thankx for the info

@davidsharp922 Жыл бұрын

Wow! You are the first person to ever assemble an ls motor. On a side note,YOU WOULD BE THE LAST PERSON I WOULD EVER LET BUILD A MOTOR ! Other than that you did a spectacular job.

@TyreFryer Жыл бұрын

Dang dude who pissed in your cheerios

@davidsharp922 Жыл бұрын

@@TyreFryer I can't tell you how many times I have had to repair motors that people who thought they knew what they were doing but actually didn't.

@TyreFryer Жыл бұрын

@@davidsharp922 it’s still running like a champ so idk what to tell ya 🤷‍♂️

@christophercarson4310 Жыл бұрын

@@davidsharp922 I agree with you 100%.. This is a clinic on exactly what not to do when building an engine..

@gordocarbo Ай бұрын

@@TyreFryer Is this your first engine build? Curious

@evanknobloch3968 2 жыл бұрын

Nice vid

@glennwilliamson7911 2 жыл бұрын

Great video. When will we get part 2?

@JOJO-pp4nm 2 жыл бұрын

Welcome back to KZfaq it been sometime you uploaded a vid and how or u??

@TyreFryer 2 жыл бұрын

Doing good!

@JustAvignone 2 жыл бұрын

Why don't you have more subs? Solid channel!

@TyreFryer 2 жыл бұрын

Thanks dude!

@bricedentel4471 2 жыл бұрын

Bet your LS is gonna blow up soon

@TyreFryer 2 жыл бұрын

Very possibly

@pmd7771969 Жыл бұрын

Once you replace the rod bolts you need to get then resized.

@papergatorzfedducca7998 2 жыл бұрын

Just found ya channel🔥🔥🔥🔥New subscriber!! Thumbs up!!!

@TyreFryer 2 жыл бұрын

Thanks dude!

@ASMRSatisfyingSkyes 2 жыл бұрын

Wahoo 100k views!! Let’s go 🥳🥳

@scottystampley Жыл бұрын

Maybe marble mystery oil whipped in the cylinder and pistons would take care of dry dock if not look for savings in oil change

@brianf8621 2 жыл бұрын

In the future use acetone to clean mating surfaces. It removes all oil film.

@zacharymartin3846 2 жыл бұрын

Just a heads up if your using the high volume pump and stock pressure your gonna need it run a deep oil pan with the stock pan that pump will suck the oil pan dry at high rpm

@TyreFryer 2 жыл бұрын

Really? I’ve never heard of that

@TyreFryer 2 жыл бұрын

But I suppose it’s possible

@HardCoreFab 2 жыл бұрын

Thanks for putting up the torque specs! I'm about to do my 6.0 and You just saved me from having to look it up. How much boost do you think you are going to run to make your 700?

@TyreFryer 2 жыл бұрын

I’m guessing around 15-17 but we’ll see.

@redman715 2 жыл бұрын

I was there for the fire I thought it was the last time I would ever see your truck

@TyreFryer 2 жыл бұрын

Nah it’s like a Phoenix, rising from the ashes lol

@Ryshann 2 жыл бұрын

I'm sure you just smashed your thumb or something, but I noticed you had a verticle line on your nail and remembered seeing some stuff about it being a possible warning for other health conditions. "A narrow black line that has formed vertically underneath your nail is called a splinter hemorrhage. It occurs for a variety of reasons and may be harmless or a sign of a more serious health condition. This condition is called a splinter hemorrhage because it may look like a wood splinter under your nail." Anyways, sick video! Trying to get an idea of what engine and trans combo I wanna toss into my old 69 for drag racing. I'm thinking I'd keep it NA till I eventually toss a turbo or spray it down.