i cant find the rest of the vids for building this stuff

A long, serrated bread knife makes a good insulation cutter. :) btw: I would use a respirator ANY time when handling fibreglass / rockwool insulation. Run a big UV light in proximity to where you are working & you'll see how many fibres are floating in the air around you.

Insulation knife!! Cuts insulation like butter

Nice work!!! I would like to ask you, how should be the distance between the joists? And how should be the height of the joist? Thank you very much

I would have used the ROXUL Sound & Fire green insulation with slag as it has much better qualities for controlling sound transmission and is what I used when building my studio.As previously mentioned by SumatoborukiSaru a serrated bread knife works the best for cutting the insulation to preferred size. Another tip would be to start laying the insulation along the end wall and work your way out so you don't paint yourself in the corner as she did in this video. Less chance to step on the insulation as you will always have an open space between the floor joists to walk. Also it really is not necessary to staple the 'U-Boats' as the load on the floor will keep them in place,... as long as your floor is level,... and it should be! The less metal you have in the floor joists the better as this will prevent/lesson sound wave transmission throughout the entire structure. You certainly don't want a Tacoma Narrows Bridge type disaster to occur in the studio due to a resonance frequency! LOL.

That insulation cuts best with a pair of large shears. I wouldn't install it without using a respirator though. As for the sound deadening properties I'd spend the extra money and get open cell foam.

there are 15 video's in the series? i only see this one

how are you going to frame 4" wall studs on top of a floor frame thats 2" in width?

nice work guys!... do you have the ceiling installation video?

Why did you use standard insulation rather than something like rockwool.

Part 2???

There is one problem with the video, and to me it was a big one. You didn't answer the basic questions. Why exactly the insulation. Why the R30. Quick description of physics behind that. The prolonged episodes of silent labor should have involved constructive advice. Time/info ratio was less than adequate. My constructive two cents. You guys seem to be amazing professionals, and I admire the fact you made an effort to educate for free. Greatness is close, tighten it up. God bless.

What about a garden shears?

Guys, wht´s the name of that pink stuff? Thanks:)

U-Boat or U-bolt... same, no probs XD

Tha da da *while stepping on the 2 by 6:s* :D

That's allot of BRFs

Consider editing. Who the hell wants to watch 10 minutes of putting insulation in?!

your going to need a fuckload of acoustic treatment in that room. a fuckload.

less talk more play

Are the U-Boats of german origin? (just kidding!)

Speaking of animals and insulation, if you store your extra rolls of fiberglass insulation in an outdoor shed waiting for your next project, be sure to include some rodent control, because them mices will shred, soil & destroy it for you, and they don't mind "the itchies" at all. Same goes for acoustic foam, cardboard, paper, fabric, anything they can shred to make a nest. Also, I wonder what evil entity would want a seemingly harmless bunch of geeks out of the building... Amityville horror?

Damn dude ruined the video man