That’s awesome! I’m going to make one that takes up the whole tube and holds more oil.

FYI. You can find those burners on EBay. Found them for $4 each

The reflector hangs off the top lip, just above the glass. Thanks for the video and the suggestion. What am awesome find. I ordered a 5set for both of my singles, and in case i buy the Candelier.

This was great, thank you for posting this! Alternative IDEA (SO EASY): I am thinking about how to fashion a mod with longer burn time (longer tubes) for camping, SO... I am going to get some EDC / Pill Aluminum air tight containers, which are the correct diameter (will fit) and longer (meaning longer burn time!) and modify them. FYI, You can look up oil lamp burn hours per ounce, or something like that, to get a better idea for modding. I am looking for 8 to 10 hour burn time. My Mod idea..., since these air-tight aluminum case tubes do not have a "wick holder" when you take off the lid, and you don't want to just drill through the lid and then not be able to seal the tube after use (assuming camping) ...is to fashion a "wick holder" to set *inside the the "container tube"*. This can be as crude as fashioning a piece from a tin can for using as the insert. For instance, a long strip of tin folded into a "U" shape (and with some added handiwork) could be inserted into the tube, with the bottom of the "U" near the top, with a wick hole in it NOTE: if you fashion something that makes it airtight, you may run into issues where the oil/fuel-of-choice does not flow up and keep the wick wet. What you do is drill a tiny hole in the top to alleviate the pressure. INSPIRED BY OUR HOST HERE ...thank you so much!

This insert is available on Amazon (of course) and I also bought a larger well-made unit on Etsy.

Nice! What's the burn time on that burner when used in the UCO?

Thanks man

How did you get the wick in? I ordered a couple and can't get the wicks in the hole

Where do you get the container for the oil?

👍👍👍👍👍👍👍👍👍👍😎