I love the painters tape trick to keep the screw holes evenly spaced in the top! That's a tactic I'll definitely use a lot! (I wonder how I didn't know of it, or think of it, before. Genius! 👍🤓
@KeithJohnsonCustomWoodworking2 жыл бұрын
Thank you sir! Once in a while ingenuity accidentally hits me. 😜😂
@Lenny_Boyle2 жыл бұрын
The table design and construction is great but your humor and production of the video is just amazing.
@KeithJohnsonCustomWoodworking2 жыл бұрын
Too kind! THanks Lenny 👊
@josephKEOarthurАй бұрын
Spot on! Funny! Great guy!
@scottb.20222 жыл бұрын
At ~15:44 you said air compressor. Did you me vacuum pump? Fun video to watch.
@KeithJohnsonCustomWoodworking2 жыл бұрын
It says "oil free air compressor" on the label, so I assume that's what it is. And thanks! 👍
@justchillinout20022 жыл бұрын
You had me at SNACKS!
@KeithJohnsonCustomWoodworking2 жыл бұрын
😂😆 I literally had to grab one after I did that intro.
@jeffforbes37722 жыл бұрын
Another great KJ video! Love the way the torsion box mounts to the tool box and that VACPAD is serious! Thanks for posting. I'm gonna try real hard to use "...Total Boat Baby" in a legitimate sentence. I'll try it out on my wife. She's always been an objective thinker.
@KeithJohnsonCustomWoodworking2 жыл бұрын
😂 That phrase will effortlessly slide into any conversation. It's actually a good conversation starter to break the ice.
@reforzar2 жыл бұрын
I’ve never sanded a shop project so much. That’s one fancy bench!
@KeithJohnsonCustomWoodworking2 жыл бұрын
Would you stop it? You’ll have plenty of time to destroy it after I get it. 😂
@royarmstrong56262 жыл бұрын
Best KZfaq channel I have found in ages, educational, quirky and fun, great combination.👏👏
@KeithJohnsonCustomWoodworking2 жыл бұрын
Wow, thanks! I really appreciate that, Roy! 🙏🙌
@chm17012 жыл бұрын
Now, that’s one hell of a bench top, Keith. Those vacpad’s are a great idea too. Have a good’un 👍
@KeithJohnsonCustomWoodworking2 жыл бұрын
Thanks mate! Its definitely a sturdy plank to work on! 💪
@matthewclemente4202 жыл бұрын
Nice job Keith ! Very strong and flat. The VacPad system is incredible . Thanks and keep it coming.
@KeithJohnsonCustomWoodworking2 жыл бұрын
Thanks Matthew!! I greatly appreciate the support and the kind words 👊
@SpencleyDesignCo2 жыл бұрын
Keep up the great work, Keith! That vacpad looks awesome!
@KeithJohnsonCustomWoodworking2 жыл бұрын
Thanks dude! Loving this vacpad system!
@SL18002 жыл бұрын
“With just a little bit of air” or lack there of. Great video!! Thanks for the idea of the mini router table.
@KeithJohnsonCustomWoodworking2 жыл бұрын
You bet! Thanks for watching!
@wendymontie56602 жыл бұрын
Way cool! Now to get with my husband about moving forward with our garage/workshop situation. :)
@KeithJohnsonCustomWoodworking2 жыл бұрын
Giddy up!! No time like the present 😜
@dougmcilwaine70782 жыл бұрын
Another great video Keith. Love the design, the descriptions of what you are doing, and of course discussions about when things don't go quite as you planned. Can't wait for the next video.
@KeithJohnsonCustomWoodworking2 жыл бұрын
Awesome, thank you Doug! I greatly appreciate that. 🙏👊
@peterream65082 жыл бұрын
While I found the video instructive, I stayed because it was deeply entertaining.
@KeithJohnsonCustomWoodworking2 жыл бұрын
Thanks Peter!! Comments like this make it all worthwhile. 🙏👍
@johnniewalker392 жыл бұрын
Your commentary is gold!
@KeithJohnsonCustomWoodworking2 жыл бұрын
Thanks so much! I appreciate that! 👊
@bill500132 жыл бұрын
Love the video and I was worried that Jerry wasn't going to make an appearance .Love that cat.
@KeithJohnsonCustomWoodworking2 жыл бұрын
😹 He's usually lurking or napping somewhere...
@joejr.9712 жыл бұрын
I am SO stoked for the mini router table build! I just made one but it’s too clunky and not mobile enough to put away whenever I don’t use it. Lookin forward to your version, looks like a great size
@KeithJohnsonCustomWoodworking2 жыл бұрын
Oh cool!! It's only prototype 1, so hopefully I work out any kinks in the future. I think I over-engineered it for such a small little table 😬😂
@joejr.9712 жыл бұрын
@@KeithJohnsonCustomWoodworking over-engineered is the way to go. Best to have too many features than too few, that’s what I tell myself to justify huge time sinks atleast
@KeithJohnsonCustomWoodworking2 жыл бұрын
@@joejr.971 Yeah, always good to rationalize manic tendencies like ours. LOL.
@georgekatechis6282 жыл бұрын
Awesome! Looking forward to the shop tour vid!
@KeithJohnsonCustomWoodworking2 жыл бұрын
Coming soon! Thanks George!
@naioti2 жыл бұрын
The censored dog hole finishing bit got me LOL.
@KeithJohnsonCustomWoodworking2 жыл бұрын
😜😂😆
@MCsCreations2 жыл бұрын
Fantastic work, Keith! Nicely done! 😃 You know what... I never thought about it, but now I may make one of those for me as well! 😃 Anyway, stay safe there with your family! 🖖😊
@KeithJohnsonCustomWoodworking2 жыл бұрын
Go for it! Thank you sir!
@rubenpuentelopez90562 жыл бұрын
Gatito 😺 mucho que aprender de tu. Saludos.!
@KeithJohnsonCustomWoodworking2 жыл бұрын
Thanks! 🙏👍😎
@Mbmoney12172 жыл бұрын
That router table is awesome! I Def need to make one!
@KeithJohnsonCustomWoodworking2 жыл бұрын
Thanks! Cheers! 🍻
@MattMuirhead2 жыл бұрын
Just a reminder that your text is now editable - you should double click to edit but ALWAYS uncheck before rendering. Wise words, KJ. Assembly table looks great - I'll give it a 9 out of 10 morsels. One point deduction because them T Tracks aren't mitered and it's making my OCD light up brighter than the lamps you demand in payment.
@KeithJohnsonCustomWoodworking2 жыл бұрын
Ha! You found the Easer egg, albeit an inadvertent editing snafu 😂. yeah, I guess I could have mitered them. Dang! Didn't even occur to me...now my morsels have shriveled right up 😩
@mauserkk982 жыл бұрын
Nice job ,just the inspiration I was looking for .
@KeithJohnsonCustomWoodworking2 жыл бұрын
Oh awesome! Thanks man 👍🏻
@jfrazier302 жыл бұрын
Keith, you're at the top of your game! Great video. You had me LOL'ing uproarously!
@KeithJohnsonCustomWoodworking2 жыл бұрын
Too kind!! Thanks very much! Glad you enjoyed it 🙌
@TotalBoat2 жыл бұрын
That look amazing!! Great project!
@KeithJohnsonCustomWoodworking2 жыл бұрын
Thanks so much! #TotalBoatBABY!!
@JkCanvas2 жыл бұрын
nice idea for more surface to store junk.
@KeithJohnsonCustomWoodworking2 жыл бұрын
That’s usually how things happen 😂
@JkCanvas2 жыл бұрын
@@KeithJohnsonCustomWoodworking Happens in my shop. I clean it and boom the elves put all the crap back..
@timcgmail5 ай бұрын
Thanks!
@KeithJohnsonCustomWoodworking5 ай бұрын
Wow! Thanks Tim. That is super generous of you 🙏👊
@tcreagh5 ай бұрын
@@KeithJohnsonCustomWoodworkingI think you are the generous one and I appreciate it.
@paulmaldonado6492 жыл бұрын
I’d love that mini router table you made👌🏼🙏🏼
@KeithJohnsonCustomWoodworking2 жыл бұрын
Thanks very much! Video coming soon!
@tedrzz2 жыл бұрын
Agreed, super interesting!!
@hankgriffis96682 жыл бұрын
Awesome build!
@KeithJohnsonCustomWoodworking2 жыл бұрын
Thanks a lot, Hank! 👍
@TheTranq2 жыл бұрын
Cool. Seems like the vac pad would be great for profiling edges and such with the router
@KeithJohnsonCustomWoodworking2 жыл бұрын
Absolutely! Infinite uses 👍🏻
@TheTranq2 жыл бұрын
@@KeithJohnsonCustomWoodworking do you have a discount code for the branding irons by chance?
@Benoit83B2 жыл бұрын
Keith, like all the other videos you do, this one was magic. The work, the naration, the sounds.... Speaking of sounds: What liquid did you drink with the straw @6:47! Since you are an influencer, I WANT to drink the same thing 🤣🤣🤣 Thanks again for this wonderful video
@KeithJohnsonCustomWoodworking2 жыл бұрын
Glad you enjoyed it! And that is actually a sound effect of an "acid burn sizzle" 😂...so, I don't think you want to drink that!
@joseantoniovongho27662 жыл бұрын
People The legend is back good work 👍😁
@KeithJohnsonCustomWoodworking2 жыл бұрын
😜👊🏻😎
@jrumbel2 жыл бұрын
Awesome video. Love the humor. I was wondering how you retrieve items that fall down the dog holes into the bench? And a suggestion on sanding between coats - you can use a much finer grade of paper than 200....closer to 600 is adequate to take down the rough spots without removing too much of the last coat applied and gives a nice smooth finish.
@KeithJohnsonCustomWoodworking2 жыл бұрын
Yeah, I'm guessing I will only drop screws down there, but anything of importance that is metal can be fished out with a magnet. Thanks for the sanding top, but I don't think I own anything higher than 220 😂
@dannyvannierop8052 жыл бұрын
Great Vid..... One thing which made me laugh though. @17:00 when you make your "Oh no I forgot a piece comment" did you realise that when you release that piece again to come back to your router table, that your router table will be on the floor?.....lol.
@KeithJohnsonCustomWoodworking2 жыл бұрын
That's why that pad is on a separate valve switch that would get switched on and off 😉
@dannyvannierop8052 жыл бұрын
In that case I did not say anything 😅
@KeithJohnsonCustomWoodworking2 жыл бұрын
@@dannyvannierop805 😜🤣
@TheKurkela822 жыл бұрын
U are incredible man!👏
@KeithJohnsonCustomWoodworking2 жыл бұрын
Thanks so much!! 🙏🏻👍🏻
@markprochaska67562 жыл бұрын
Sweet vid!! Awesome versatility in the bench top.
@KeithJohnsonCustomWoodworking2 жыл бұрын
Thanks man!! I'm liking how it's working out so far. 👍
@billm45602 жыл бұрын
Another awesome build Keith! 👍🏻 I’m guessing that top is kinda heavy? I use the Halcyon finish a lot and really like it! That vacuum system is the cats meow! 😺 And it’s Jerry approved! 😺 Thank you very much for sharing!
@KeithJohnsonCustomWoodworking2 жыл бұрын
Well, I won't be lifting it up and spinning it around on my finger tip like a basketball, but it's manageable. 😂 Thanks so much for the comments! 🙏👍
@Wolf-yw7en2 жыл бұрын
Nice torsion box. I think I’ll be making something similar.
@KeithJohnsonCustomWoodworking2 жыл бұрын
Very cool! This is actually my first one, so hopefully nothing goes haywire 😂
@DesignsbyDonnie2 жыл бұрын
Great video bro!
@KeithJohnsonCustomWoodworking2 жыл бұрын
THanks dude! Super appreciate it. Hope you are well! 👊
@numerousid64782 жыл бұрын
Finally! The new video has released
@KeithJohnsonCustomWoodworking2 жыл бұрын
😂 Jerry said the same thing 😹
@numerousid64782 жыл бұрын
@@KeithJohnsonCustomWoodworking miss both of them!
@mikesvwcorrado2 жыл бұрын
"Strikea" -Cliffhanger
@KeithJohnsonCustomWoodworking2 жыл бұрын
YES!! YES!! You sir, have nailed it!! 🍻 🏆
@mrclean1462 жыл бұрын
Watched a few of your videos. Had to sub. Thanks.
@KeithJohnsonCustomWoodworking2 жыл бұрын
Awesome, thank you! I really appreciate it! 👍
@douglasbrown3493 Жыл бұрын
Shop cats, so cool!
@KeithJohnsonCustomWoodworking Жыл бұрын
Thanks man! They’re the best! 😺
@kalebfear15592 жыл бұрын
That's cool!!
@KeithJohnsonCustomWoodworking2 жыл бұрын
Thanks very much, Kaleb! 🙌
@gregmize012 жыл бұрын
Jerry is incredibly enthused😹
@KeithJohnsonCustomWoodworking2 жыл бұрын
You can't rattle that guy! 😂
@holdemNE12 жыл бұрын
5:23 THEY BUTT WHAT???? Oh tips pa, pa, pa......never mind. Nice video, thanks for posting.
@KeithJohnsonCustomWoodworking2 жыл бұрын
😬😆😂
@kestutisk93972 жыл бұрын
Great video agan thanks 👍
@KeithJohnsonCustomWoodworking2 жыл бұрын
🙏🏻👍🏻😎
@ktsndog2 жыл бұрын
i would love your mini router table!!!! i am in Canada. Love your u-tube
@KeithJohnsonCustomWoodworking2 жыл бұрын
Thanks Lise! I really appreciate the support!
@ktsndog2 жыл бұрын
@@KeithJohnsonCustomWoodworking love the tree bench you made with bourbonmoth
@KeithJohnsonCustomWoodworking2 жыл бұрын
@@ktsndog Thanks a lot! Definitely one of my favorite projects of all time!
@richardking78002 жыл бұрын
very nice Keith maybe you could share that with Jason lol
@KeithJohnsonCustomWoodworking2 жыл бұрын
Thank you!
@eladsinay6914 Жыл бұрын
Hi. Great video. Where did you get that air compressor and how is it that it attaches to the compressor. I have one for my vacuum chamber to take out air bubbles from epoxy but the fitting makes it impossible to attach the air hose or any sort of fitting so that I can attach the hose. Weird fitting. Still figuring out my options with that but this looks direct so I’d rather go with your air compressor
@KeithJohnsonCustomWoodworking Жыл бұрын
They sell them on the vacpad website
@shopcatt6432 жыл бұрын
Cool beans!
@KeithJohnsonCustomWoodworking2 жыл бұрын
Thanks a lot!
@calston15577110 ай бұрын
How is bottom layer attached to the Husky? Thanks! Love your videos and work.
@KeithJohnsonCustomWoodworking10 ай бұрын
Thanks! Bottom layer is screwed up into through the cabinet
@PaliVCiernom2 жыл бұрын
Wait, are those air supply tubes, when they actually do not supply air? Or target supply lack of air :)
@KeithJohnsonCustomWoodworking2 жыл бұрын
Well, they hold air 🤷🏼♂️
@davobonbon2 жыл бұрын
Great video, Keith! What are your thoughts on bench dogs vs t-tracks for assembly tables? I mean, you obviously went with bench dogs. Are there more or better accessories for one or the other or something?
@KeithJohnsonCustomWoodworking2 жыл бұрын
Thanks David! Bench dogs and t-tracks are both great options. Although t-tracks seem to have quite a bit more clamping and hold down accessories available, they can also snag and damage workpieces when sliding materials across your bench. So, it's really a preference thing. I know some people who love the tracks and others who regret putting them in.
@Zamboni-08052 жыл бұрын
Nice and sturdy, just ignore the wobble...jk, nice job with the table.
@KeithJohnsonCustomWoodworking2 жыл бұрын
👍🏻🙌🏻
@ivanwalker33912 жыл бұрын
That VACPAD system just sucks! Great video. Keep 'er lit Bro!
@KeithJohnsonCustomWoodworking2 жыл бұрын
😂 it is such a little sucker!
@JNHEscapes Жыл бұрын
Love your videos. Where do you find the best parts such as threaded inserts and those knobs? All I ever find are junk so I’m just curious if you’re building fine furniture what is your vendor of choice?
@KeithJohnsonCustomWoodworking Жыл бұрын
Thanks James! Knobs are Powertec and Rockler and threaded inserts from Amazon. All links are in the description of the video.
@JNHEscapes Жыл бұрын
Great thank you! I am typically lazy and do not read the descriptions thinking most would not take the time to itemize such…but you provide excellent detail so I should have known! Ha!
@999dragula2 жыл бұрын
Very nice work table! What is the benefit of the satin finish on top of the gloss? Why not just use the satin?
@KeithJohnsonCustomWoodworking2 жыл бұрын
Satin on satin can start to get milky looking. Not really a deal breaker for this, though 😂
@allent5552 жыл бұрын
Well done sir well done. As I'm in the taking my ideas to design / build my assembly table, out of left field comes your video with a unique approach. Now who supplies HDF in my area of the country? (
@KeithJohnsonCustomWoodworking2 жыл бұрын
Excellent! Melamine or standard plywood are also a perfectly good options. 👍
@allent5552 жыл бұрын
@@KeithJohnsonCustomWoodworking Would you mind sharing the over all dimensions of the table top please?
@KeithJohnsonCustomWoodworking2 жыл бұрын
@@allent555 Sure, it's 73" x 27" x 4.25" thick
@allent5552 жыл бұрын
@@KeithJohnsonCustomWoodworking Thank you Sir, have a great day.
@bascodelagamma2 жыл бұрын
More Ear Cam!!
@KeithJohnsonCustomWoodworking2 жыл бұрын
😂 😆 👂🎥
@davvvid2 жыл бұрын
Where’d you get the track saw holders for the garage door?
@KeithJohnsonCustomWoodworking2 жыл бұрын
amzn.to/3OOQ350
@Madmaxian10882 жыл бұрын
Have a video or info on the track mounting on your garage door?
@KeithJohnsonCustomWoodworking2 жыл бұрын
Here’s a link to the track clips. It’s an easy install. amzn.to/39PcBk3
@Madmaxian10882 жыл бұрын
@@KeithJohnsonCustomWoodworking Tanks :)
@timcgmail5 ай бұрын
Thanks Keith I get a real kick out of your videos in your cats. I purchased the VacPad system based on your video. It arrived in January and I just started trying to set it up in March but there’s no instructions and it doesn’t look anything like the systems that I see in your video. I have all of the plates. I have the vacuum I have the hoses. I have the foot switch, but I don’t see anywhere to hook the tubes up. I wonder if you have any instructions on how to set it up
@KeithJohnsonCustomWoodworking5 ай бұрын
Hey Tim! You can can out this video by Spencer Lewis on operation kzfaq.info/get/bejne/pbuWbLKIrK6xn6s.html . But there should be little quick disconnect ports on all of the pads that the hose pushes into. They should either by on the edges of the pads or the bottom depending on which ones you have. Hope this helps!
@timcgmail5 ай бұрын
@@KeithJohnsonCustomWoodworking Thank you I have the newer pads and it appears all the videos are using the older style with the port on the edges. I'll see if I can figure it out. Appreciate all your videos. Thank you
@KeithJohnsonCustomWoodworking5 ай бұрын
@@timcgmailOh no! Sorry I couldn't help with the redesigned pads.
@timcgmail5 ай бұрын
@@KeithJohnsonCustomWoodworking Got the VACPAD setup and integraded into my MFT Table it's working great. Thanks again for the help and the reference to the VACPAD system. -tim-
@loganpirie43872 жыл бұрын
I thought the vac packs seemed a little gimmicky but after you showed how they work I’m definitely a believer. One question though, how did you secure the one that holds the router to the top? Love torsion top benches, I’m on my second with eyes on the third with “refinements.”
@KeithJohnsonCustomWoodworking2 жыл бұрын
So, you have a couple options on how to secure those pads...there can also be a hole drilled in the other side which allows it to suck down and be secured to the bench, as well as the vacuum hole on the other side that let's you secure your workpiece.
@guillermo77772 жыл бұрын
Amazing table looks awesome, thanks for showing the build, but at the end of the video you seem like regretting it, couse we all know that most likely who wouldn’t use a brand new surface for junk once in a while
@KeithJohnsonCustomWoodworking2 жыл бұрын
😂 I just know myself and that surface will (at times) become a collection dump for miscellaneous stuff that just gets in the way. Just need to be more vigilant about keeping it clear.
@levistocker30332 жыл бұрын
Green tape at 9:19
@KeithJohnsonCustomWoodworking2 жыл бұрын
Gotta have it! 😂
@LuisSanchez-wf9zw2 жыл бұрын
Did you miter the ends of the t track at the corners?
@KeithJohnsonCustomWoodworking2 жыл бұрын
No, just left them square.
@robertwelch55842 жыл бұрын
where do you get the brackets and clamps for your Festool guide rails. That would work perfect in my small shop. Thanks!
@KeithJohnsonCustomWoodworking2 жыл бұрын
You can get them right here: dashboardpws.com/products/guide-rail-brackets-bundle
@robertwelch55842 жыл бұрын
@@KeithJohnsonCustomWoodworking Looking for the one that you use to connect to the roll up garage door.
@KeithJohnsonCustomWoodworking2 жыл бұрын
@@robertwelch5584 ohhhh. LOL. Here you go: amzn.to/39bxZD6
@robertwelch55842 жыл бұрын
@@KeithJohnsonCustomWoodworking Perfect and thanks!
@chadkesner83182 жыл бұрын
I cant find anything on the internet or in my town for HDF plywood where do you get yours?
@KeithJohnsonCustomWoodworking2 жыл бұрын
Atlantic Plywood or Robert’s Plywood on Long Island. It also goes by combi-core
@jakebaker74052 жыл бұрын
I too have tear out issues with that style of edge trimmers. What method do you use when it must be perfect?
@KeithJohnsonCustomWoodworking2 жыл бұрын
Typically I don't it cut the edge banding so oversized , so I will just stick a piece of 120 or 150 grit to a piece of wood and hit the edge at an angle by hand until the excess is trimmed away. Or I will hit a with sharp plane or chisel and finish sanding by hand.
@eladsinay6914 Жыл бұрын
Also, you never explained how you got the vac pad that’s on top of the table to hold to the actual table top. Does it also suction itself down to the table ?
@KeithJohnsonCustomWoodworking Жыл бұрын
Yes, with a hole in the back of the pad, it suctions itself down.
@audioman992 жыл бұрын
Hi Keith, did you make the mft top holes so that each hole is usable...meaning not hitting the inside partitions?
@KeithJohnsonCustomWoodworking2 жыл бұрын
Correct. All torsion partitions are directly between 2 holes in both directions so all holes are useable. 👍
@ewe232 жыл бұрын
Amazing. Thanks for sharing and inspiring. Quick question ... I tend to drop at least 389 items in my dog holes each time I'm in my shop. But I can get to them when that happens. Are your holes positioned on top of the support pieces inside the box so they each have a bottom?
@KeithJohnsonCustomWoodworking2 жыл бұрын
Thanks Eric! And yes, there is a hole in each "compartment" underneath if need be. Or a small stick with a magnet or double sided tape can fish out anything that may need to be retrieved. 👍
@GlennBrockett2 жыл бұрын
I imagine that eventually they will fill up with wood shavings / sawdust and cease to become a problem.
Keith! Was the "TEXT IS NOW EDITABLE, DOUBLE CLICK TO EDIT, UNCHECK BEFORE RENDERING" at 7:25 on purpose?
@KeithJohnsonCustomWoodworking2 жыл бұрын
Uh no. Amazing what people comment on...😂
@tomschroeder73702 жыл бұрын
Hey Keith how is that peel and stick veneer holding up? Also for the halcyon did you tip with a brush after or did level nicely with the roller?
@KeithJohnsonCustomWoodworking2 жыл бұрын
Veneer still tip-top. 👌🏻. When rolling the Halcyon I just let it level out, but it’s just a workbench. You may have to tip it on a more important application.
@kahlsawmillandwoodworking52672 жыл бұрын
Thanks for the video!! Off topic from your video though- what do you use to hold up those festool tracks on your garage door
@KeithJohnsonCustomWoodworking2 жыл бұрын
Thanks man! Here's a link to the mounting clips for the Festool tracks: amzn.to/3Ap0V2S
@cemontalvo122 жыл бұрын
Nice work. I saw another vid of yours where you had mounted the Dashboard track hinge on a table - is this the table you’re using as an mft? Any concern for dust buildup in the tortion boxes, or just worry about it when you replace the top?
@KeithJohnsonCustomWoodworking2 жыл бұрын
Yes, using this as my MFT. It would take 50 years to fill that up with sawdust, so i'm not really worried about it. 😜
@jbernhoft2 жыл бұрын
I have been looking for a good branding iron, which model did you get? The smart one?
@KeithJohnsonCustomWoodworking2 жыл бұрын
Yes! The SmartBrand. It’s amazing with the temperature control. 👍🏻
@EvanDunville2 жыл бұрын
Beautiful build. Any worries you might drop small things down the holes? On my Paulk style bench I always drop stuff down the holes.
@KeithJohnsonCustomWoodworking2 жыл бұрын
For sure. Hopefully only screws, though 😬😂. I’m thinking about cutting an access panel underneath in case I drop anything super important down there.
@MJ-nb1qn2 жыл бұрын
Hey Wild Man, another winner. I ordered some more RMC today and told my supplier that YOU are probably responsible for a great many sales, and they said “Who”? Sorry Man, I’ll stay after them. Great video. Did you weigh that torsion box?
@KeithJohnsonCustomWoodworking2 жыл бұрын
😂 Well, name dropping doesn't always work. hmmm...haven't weighed the table, but i can lift and maneuver without issue which means it's not too heavy 😂
@robertspiewak17592 жыл бұрын
Good and inspirational idea! What headphones are you using for easy protection?
@KeithJohnsonCustomWoodworking2 жыл бұрын
amzn.to/2VPwPGS
@robertspiewak17592 жыл бұрын
@@KeithJohnsonCustomWoodworking thank you
@BrainSlugs832 жыл бұрын
Adequate is right, you only put your logo on it 3 times. There's clearly way more surface area (especially on the inside) where you could fit more. 😤
@KeithJohnsonCustomWoodworking2 жыл бұрын
Yep, and the bottom and the sides, too. Next time...😂
@JohnCinOz12 жыл бұрын
Another great video Keith, informative and entertaining as always! Quick question: what is the capacity of your vacuum pump (in CFM or litres or whatever). I’m thinking of buying the VACPAD system but I would buy the pump here in Australia. Cheers, John
@KeithJohnsonCustomWoodworking2 жыл бұрын
Hey John! Unfortunately, I have no idea. The label on my compressor only says 120V, 60 hZ oil-free air compressor, so I'm not sure how much air it's pushing. I would reach out to Dino and DM him directly on Instagram and see what he recommends. instagram.com/kouroscarpentry/
@JohnCinOz12 жыл бұрын
@@KeithJohnsonCustomWoodworking Hey Keith, greetings from Australia and thanks for the suggestion; I’ll follow up as suggested. Love your work, mate! 👍
@KeithJohnsonCustomWoodworking2 жыл бұрын
@@JohnCinOz1 Thanks so much, John! I really appreciate it. Hope you are able to get the Vac Pad system - I think you will love it!
@handymadness2 жыл бұрын
How is the vac pad that is flat on your bench top attached to the bench? Is it just vacuumed to the bench as well?
@KeithJohnsonCustomWoodworking2 жыл бұрын
Correct! there is a tiny hole on the back that sucks it down to the table. It's a really cool system.
@handymadness2 жыл бұрын
@@KeithJohnsonCustomWoodworking omg. That’s unbelievable. I must buy some of these. Thanks for bringing our attention to this. I always though the only option as the festool version!
@KeithJohnsonCustomWoodworking2 жыл бұрын
@@handymadness Awesome!! You won't regret it!
@messiercustomwoodworking2 жыл бұрын
Great video! I've been trying to find where to buy high density mdf plywood. Do you have a recommendation for where to buy? I haven't been able to find it anywhere.
@KeithJohnsonCustomWoodworking2 жыл бұрын
Thanks man! Not sure where you live, but I get it at Atlantic Plywood.
@messiercustomwoodworking2 жыл бұрын
@@KeithJohnsonCustomWoodworking thanks! It looks like they have locations a little far for me but it gives me a starting point.
@KeithJohnsonCustomWoodworking2 жыл бұрын
@@messiercustomwoodworking I don't think they sell to the general public so you need a business account.
@liveoakwoodworx39672 жыл бұрын
Hey Keith, are there multiple foot releases available for the vacpad, or does one release everything at once?
@KeithJohnsonCustomWoodworking2 жыл бұрын
Great question! I only have one to release them all, but you may be able to run splitters to different foot pedals. Not sure. Hit up Dino at Kouros Carpentry on IG and you can ask him directly: instagram.com/kouroscarpentry/
@AlexK070102 жыл бұрын
what is the total height of your bench now?
@KeithJohnsonCustomWoodworking2 жыл бұрын
36 inches
@AlexK070102 жыл бұрын
@@KeithJohnsonCustomWoodworking thank you. Ah just noticed. You took casters off?
@KeithJohnsonCustomWoodworking2 жыл бұрын
@@AlexK07010 Correct. Don't need it to be mobile.
@AlexK070102 жыл бұрын
@@KeithJohnsonCustomWoodworking ah . I have same tool box and was trying to figure out how it matches the table saw height now it makes sense. Thank you
@parkwayconcepts87582 жыл бұрын
They should rename KZfaq KeithJohnsonTube
@KeithJohnsonCustomWoodworking2 жыл бұрын
😂 Too kind, but thank you!
@jojd4uc2 жыл бұрын
"Text is now editable, double click to edit, uncheck before rendering". Oops, I think you forgot something 😂🤣🤷