Ultimate Beginners Guide to Using Electric Motors for Makers and DIY Projects;
Рет қаралды 2,413,452
Күн бұрынAn introduction to motor types, power, and references to how to wire, speed control, and use all the common types of motors with a focus on reusing motors salvaged from appliances and other sources. Steppers, BLDC, PMDC, single and three phase, universal motors, and more
If you want to chip in a few bucks to support these projects and teaching videos, please visit my Patreon page or Buy Me a Coffee.
/ jeremyfieldingsr
www.buymeacoffee.com/jeremyfi...
Social media
Instagram jeremy_fiel...
Twitter / jeremy_fielding
My websites www.jeremyfielding.com
www.fatherhoodengineered.com
My other channel - Fatherhood engineered
/ @fatherhoodengineered
************************************
Notes:
One Playlist with all the videos.
• Beginners Guide to Usi...
R#1 Introduction to Gears (Beginning of Video) • How I Design And Cut M...
R#2 Using Pulleys • 7 Tips For Best V belt...
R#3 How Single phase motors Work • How Motors Work For Be...
R#4 Wiring Single phase motors • How To Wire Most Motor...
R#5a Single phase Speed control problems part 1 • Will A Dimmer Switch o...
R#5b Speed control problems part 2 • Speed Control for Shad...
R#6 How 3 phase motors work • How Motors Work for Be...
R#7 Run 3 phase on Single phase • Three Ways To Run A Th...
R#8 How Universal motors work • How Motors Work for Be...
R#9 How to wire Universal or DC motors • How To Wire A Large DC...
R#10 How DC motors work • How Motors Work For Be...
R#11 The treadmill speed controller • Building A Variable DC...
R#12 How Steppers work, and Using them with Arduino • Stepper Motors with Ar...
R#13 Intro to Motors and BLDC motors • Brushless DC Motors an...
Bonus 1: How to reverse your motors direction • How To Reverse the Dir...
Bonus 2: Motor video library project. • How I Plan To Create T...
FAQ from the comments
1. What do you do with all the motors?
You might be new here, but nearly every project on my channel has an electric motor in it. I love making things that move. Also I create teaching videos (like the one you just watched), so I am looking to collect as many different motor types as I can find, then create videos about how they work and how to use them. Check out bonus 2 from the references above.
2. Can you make a generator/windmill/ etc with these motors?
Check out my series on the generator project. You will learn a great deal there.
• How To Make A Generator
3. Which motors can you use in a go kart?
I have a series of videos about my electric go kart.
• Converting A Go Kart t...
Technical corrections
Nothing yet.
Final Note:
PLEASE UNDERSTAND...I receive hundreds of messages on all platforms (email, Facebook, comments etc) asking for advice, and help with projects. At this volume, I simply can't do one on one advice.
@2049bits 5 жыл бұрын
Smart man, well spoken, info per minute rate ( IPM) is great! THIS is a KZfaq, Best Use: shared Experience. Thank You. Subscribed!
@LaneLarson 5 жыл бұрын
I second this. Excellent all around!
@jakeschrag 5 жыл бұрын
I was about to leave this same comment befor I saw yours. Thumbs up
@MisterKaen 5 жыл бұрын
I agree with you 100%
@2049bits 5 жыл бұрын
@@jakeschrag thanks for your support of making YT great!!
@slowburntm3584 5 жыл бұрын
I don't subscribe after one video very often, great video, thanks!
@markproulx1472 4 жыл бұрын
This can't be KZfaq. There's no stupid music. The presenter gets right to the point and provides supremely useful information. I'm confused.
@coguard3798 4 жыл бұрын
your not alone
@firuzpulatov7750 4 жыл бұрын
I was planning to fast-forward/skip the video, but continued to watch it because of your comment. Thank you!
@firuzpulatov7750 4 жыл бұрын
@@zee-vc5wl obviously youtube trends ;)
@fritzwilhelm8258 3 жыл бұрын
I also am struck relatively silent. Except for now...
@seanbaldeschwiler1891 3 жыл бұрын
Indeed it is Mark. How are things on the farm?
@RealEngineering 5 жыл бұрын
This was great.
@natedunn51 5 жыл бұрын
well if real engineering says it's great, must be worth watching.
@Zlugs 5 жыл бұрын
What are u doing here buddy *insert lenny face*
@elguapo1690 5 жыл бұрын
I wonder if I'm here because of Real Engineering...
@bureaucratbayonet 4 жыл бұрын
I saw the title and thought it was a real engineering video
@mr.waffentrager4400 4 жыл бұрын
OOOOOOOOOHHHHHHH....
@stevelasher422 3 жыл бұрын
This guy is like the Bob Ross of Electric Motors. Stays in his lane, and gives TONS of great info. I could listen all day and I'm not even an electrician. Just awesome.
@totofromfrom1812 2 жыл бұрын
Happy little treadmills
@toddpiercey6595 2 жыл бұрын
Yes or like the Julius Sumner Miller; Who never gets the attention he deserves.
@thunderkunt5416 2 жыл бұрын
Bob Ross = Fraud !
@luciusseneca9162 2 жыл бұрын
Best part was "I'm not even an electrician". Lol same here
@richardcranium3417 2 жыл бұрын
I’m not an electrician but I play one on tv.
@padler5106 3 жыл бұрын
I've spent 40 years in the electrical end of industrial machinery and I know a lot about motors and controls. Jeremey taught me a few things watching this video. Well done. Smart man and he knows what he's talking about.
@flyback_driver 7 ай бұрын
I agree. When I started really tinkering and designing projects I've wanted to for years this is where I started. I think what I really like about his content is the layers. It probably took me (from zero) three years to completely grasp the information in this video and actually apply it. I'd watch it and then learn basics about electrical circuits. Come back apply the electrical design knowledge and get more from videos like this. It wasn't until I was designing my own vfd for my lathe to run a three phase motor that everything sank in and there's probably so much more I still don't know. "There are known knowns..." Haha Donald Rumsfeld always comes to mind when I think about the fact there's information I don't even know I'm missing but yeah man it's been two years. Come back and see if there's even more you might learn.
@vimalakirti3908 3 жыл бұрын
I respect any man who drags a wood-chipper home to pull the motor.
@vimalakirti3908 3 жыл бұрын
@CW NunyaDamnBiznez I drag home anything with a wire
@baburaospeaks2429 3 жыл бұрын
@@vimalakirti3908 😅good one
@ruinunes8251 3 жыл бұрын
Vimala Kirti You just made me laugh lol
@ruinunes8251 3 жыл бұрын
Now imagine him dragging the chipper home just to find out that the neighbour already took the motor out😂😂
@philldavis5778 3 жыл бұрын
@@ruinunes8251 I imagine he would check that before dragging it home lol, he seems a little to intelligent to make that sort of mistake. I on the other hand have made that mistake 😂🤣 I'm so glad I have come across this channel as I've been dragging all sorts of appliances home and taking the motors out of them with the intention to learn how to reuse the motors, I've got milk crates full of motors now and finally I've found someone that explains things in a way I can understand. This is the first of his videos I have seen and I subscribed in the first 2 mins.🙌🙌😁😁
@jorgedante007 5 жыл бұрын
Perfect!! No background music !!! No distractions,easy to understand.😊
@ManuelGomez-rm1rt 4 жыл бұрын
Straight to the point
@David-bc4rh 4 жыл бұрын
Instantly hooked. No flashy edits, besides the fast forward, which is fine with me.
@mystical388 4 жыл бұрын
No slideshows
@markproulx1472 4 жыл бұрын
Good grief, no kidding!
@nunyabisnes6543 4 жыл бұрын
Zaklee!
@kyleloudon 2 жыл бұрын
I’m a mechanical engineer and just wanted to say that you are a great teacher and I really appreciate your videos. Please keep doing what you’re doing!
@Poljski 3 жыл бұрын
I have been through high school and collage for Electrical Engineering but none of the teachers could explain these principles in such an easy to understand manner, I am truly in awe. Thank you very much for sharing this knowledge!
@davidsawyer1599 3 жыл бұрын
Hello My brother in-law is a software engineer. In other words he's bad cholesterol. Of no use. Makes every day things insanely over complicated.
@bnb7094 2 жыл бұрын
There's No use for an education that doesn't teach you how to figure things out yourself. If there was, you'd be taught the basics so you can build upon them and actually learn the subject matter. Memorization is not knowledge. Information/data is not knowledge. A book on a shelf or an internet search engine is not knowledge. Applying information to your daily life is knowledge. If you can't make it work then you do not know it.
@Mr.8r1ce-8usch Жыл бұрын
Im hoping you wrote 'collăge' instead of 'college' on purpose. 🙂
@Mr.8r1ce-8usch Жыл бұрын
@@AJNoon I Fukin' knew it!!!!!!! Lol
@nxbeh9975 Жыл бұрын
Hey do you know any other channels that are as good as this guy
@matthewwilson4592 4 жыл бұрын
This is KZfaq at its finest. No BS, no gate keeping, no talking down. Just good info with a nice defined scope and purpose.
@eilertb1310 3 жыл бұрын
Jeremy, you are fantastic at getting your message and knowledge across to us. You have a great blend of taking technical specifications and merging it to real world applications. Keep up the great work, I can’t stop watching your videos and I’m excited to see more.
@SEThatered Жыл бұрын
I am glad your channel got recommended to me. Once in a while algorithm works.
@williambarnes7948 4 жыл бұрын
"Fat kid on a see saw" this man speaks simple truths!
@cameron-wy4wd 4 жыл бұрын
Haha
@fredprater5012 4 жыл бұрын
when you're the fat kid there are no see saws only catapults
@1414141x 4 жыл бұрын
Cruel, but a great analogy !
@omni574 3 жыл бұрын
@@fredprater5012 I was the fat kid, can confirm.
@JareBareXP 3 жыл бұрын
I'm a fat kid and my see saw felt this
@user-sc5ob5ek9h 3 жыл бұрын
Learnt more from this guy in 10 min than my 3 years in technical school.
@TheBinklemNetwork 3 жыл бұрын
sounds like its time for *puts sunglasses on* you to cut your losses. YEEEEEEAAAAAAAHHHHHHH
@chrisrose774 2 жыл бұрын
M
@chrisrose774 2 жыл бұрын
Frin k. Mrinov
@KatoOnTheTrack1 2 жыл бұрын
That’s not good. We’re you listening in class? This is strange forward stuff with respect to motors.
@dubmob151 2 жыл бұрын
@@KatoOnTheTrack1 did you really mean straight? That's strange otherwise.
@Wbjpen 3 жыл бұрын
I don't know where to begin. I appreciate these videos so much. I just found this channel from reddit and can hardly believe the quantity and quality of these engineering videos. Mr. Fielding has enthusiasm, clarity, and technical prowess in abundance. Thank you!!
@H0mework Жыл бұрын
Your ability to speak to the layman and teach complex subjects without resorting to jargon is incredible. I'm subbed!
@01blackhat 5 жыл бұрын
I'm watching you for the first time, and what first struck me is, if you are not a teacher or instructor in your professional life, you are keeping a gift from the world. You got that.
@CortMarshal 5 жыл бұрын
This video ALONE has reached 180,000 people so far. I'd say he's not worried about keeping things from the world...
@sixtycats8652 5 жыл бұрын
@@CortMarshal hey come on dont be like that. no need to be needlessly confrontational.
@greekkidshows9373 5 жыл бұрын
@@sixtycats8652 I don't think he is He is having a hard time saying thank you & that he is good at what he is doing. That he should be a teacher because all his students will learn! Unlike most teacher's that can only teach those who already know some. Those teacher's usually need to be corrected at least on a few occasions
@AndyNav1 5 жыл бұрын
Agreed 100%!
@sixtycats8652 5 жыл бұрын
@@greekkidshows9373 true.
@christopherdahle9985 4 жыл бұрын
This is what I want to see on KZfaq, real information from someone who knows what he's talking about.
@hibernianmelody6761 2 жыл бұрын
Exactly.
@bernardwind1633 2 жыл бұрын
Eloquent explaination, love your candid delivery style
@SeeSaw72 2 жыл бұрын
Excellent description on various motors available to us home engineers.
@leebrewer1190 5 жыл бұрын
You, sir, are a GREAT teacher. You are logical, organized, and easy to follow. The quality of your content is something that would take forever to piece together into a coherent source from other bits and pieces of info scattered through books and the internet. This from a researcher and professional teacher.
@reaDm4earl 5 жыл бұрын
Agreed
@DavidTangye 5 жыл бұрын
@@REL602 I can't believe you didn't learn a single thing. no you won't learn everything all at once and you may need to replay it perhaps two or three times or more. however I can assure you that many beginners should be able to get a heck of a lot out of this sort of video if they set their mind to it. You also need to take notes off anything that you don't understand and go look elsewhere to explain those specific things. Don't be lazy. Learn how to learn. Hopefully they tried to teach you that at school..
@JeremyFieldingSr 5 жыл бұрын
@@REL602 This particular video is focused on how to apply the various motors for beginners. You would really enjoy the "how motors work" playlist. There is one on three phase as well as all the types. My personal favorite is "how motors work; DC motors". It is the very beginning of understanding motors. They are linked in the description as I described in the video. It was just too much detail for one video, so I pointed you to other videos where I explain those kinds of things. I promise it will explain at the most basic level what three phase is, and any other motor question you might have in that series.
@ayporos 5 жыл бұрын
Really? I wouldn't rate him a 'GREAT' teacher. He is constantly mixing his words (for instance saying power where he meant torque) which is quite confusing if you don't already understand the concept. I'll concede that he does know what he's talking about and his intentions are good, but such blatant mixing and mashing of wrong words I cannot appreciate.
@fidelismutya1876 5 жыл бұрын
Awesome thanks
@MucaroBoricua 5 жыл бұрын
I wish all KZfaq videos were concise and informative like this one.
@johnberumen1666 2 жыл бұрын
Studying engineering right now and I’m very glad I found this channel, real life application conversations are the best! You’re doing gods work 🙏
@immortal-ghoul 2 жыл бұрын
I've been working on a project with a friend and your motor guide videos have been great with helping me make more informed design choices. thank you!
@zapatatapaz 5 жыл бұрын
Clear, with abundant information, and the consciousness of countries other than the USA existing, thank you.
@JP-xd6fm 5 жыл бұрын
True, so hard to find such a nice american just not thinking USA is the entire world. And also, very nice accent, I'm not english speaker and I understood all of it... well I had to google what a treadmill was lol
@tomyy666 5 жыл бұрын
Great way to put it.
@iian_ 5 жыл бұрын
@@JP-xd6fm You realize that this is how most middle class people speak in the U.S., right? Also you are on a platform based out of our country. So who is the one being rude saying you should be included?
@JP-xd6fm 5 жыл бұрын
@@iian_ Sorry, movies, music ant tv gave me a bad idea of how the afro-american people speaks, for example for me is hard to follow Dave Chappelle's stand up or Chris Rock, maybe also because they speak so fast, lol. What do you mean I'm in a platform based out of your country? , I don't get that.
@Styno91 5 жыл бұрын
@@iian_ What is that supposed to mean? "KZfaq is American, so everyone outside the US should either stand in line or fuck off" ?? Im guessing that kind of thinking is the exact thing Francisco, backed by J P meant.
@timlucas143 4 жыл бұрын
Jeremy is a legend at explaining things accurately and concisely.
@user-ev3dq5yi1q 8 ай бұрын
You clear but not over simplified presentation cleared up some confusion / questions I’ve had about motors. Thanks
@snucc1000 2 жыл бұрын
This presentation was flawless in so many ways, it doesn’t feel like KZfaq. Thanks for sharing your immense knowledge man.
@jonrok8576 5 жыл бұрын
Can't recall seeing anything on yt without at least a few loudmouth know-it-all/troll comments...I scrolled down a good 2-3 pages & only saw gratitude & respect... & I totally agree with them. Good work man. I wish my organize could mind function so & effectively!
@LBCAndrew 4 жыл бұрын
Agreed. Though it makes me wonder who those 432 people are giving the thumbs down.
@JordanBartholme 3 жыл бұрын
Did what you see there I do.
@JordanBartholme 3 жыл бұрын
@@LBCAndrew Haters.
@R3lay0 3 жыл бұрын
@@LBCAndrew Most likely Austrialians.
@dead_warrior_wae 3 жыл бұрын
one of the last remaining 'straight to the point' channels. what a gem
@prodigalson2670 2 жыл бұрын
What a refreshing thing for a man to just start a video supplying dense information, no fluff no beating around the bush. Great stuff dude.
@mikenco 7 ай бұрын
Love how this vid jumps between Imperial and Metric. Welcome to where the UK has been for the last 5 decades! ;)
@harlanbaker7476 5 жыл бұрын
I've been called a hoarder because i save perfectly good motors out of things. at work we replaced an 800 dollar pump, i took it home and removed the pump and swapped the squeaky bearing and it works great. I wish more people would realize that its not trash and things can be fixed.
@RickTrajan 5 жыл бұрын
Components with smaller components can only need a small component but is the time for diagnosing, looking for those specific parts, chances of wrecking more things and down time of the equipment worth it? I personally think that learning to breakdown and understanding components to it's smallest component have some utility but the industry for the most part doesn't - except for people who work on machinery I'd say.
@soarer282 5 жыл бұрын
I am guessing you don't work in China, Russia or India.
@RickTrajan 5 жыл бұрын
@@soarer282 if you're talking about me you are right.
@peetre 5 жыл бұрын
Sorry, I see a divorce in your future!
@destroyer4416 5 жыл бұрын
If i ask to take a broken motor home i can't so yeah there are more people that wanne fix "trash" but most are not allowed
@beckwil0852 4 жыл бұрын
I am a 67 year old grandmother who wants to learn more. Your video is one of the best I have ever watched on KZfaq. I actually learned something rather than listening to someone who just likes to hear themself talk. Thank you and keep making these videos.
@showxating9885 6 ай бұрын
I can't sufficiently state my appreciation for your videos, Jeremy. Thank you. Really. I had so many questions regarding re-purposing electronic components, and you're knocking them down in multiples in every post. Amazing.
@FerrisMcLauren Жыл бұрын
This video is amazing. Clarifying any confusion or questions before they happen. Just really well done.
@hgbugalou 5 жыл бұрын
Great info. You have made it where I strip motors out of anything I throw away.
@Alkatross 5 жыл бұрын
Me too! I rip motors of all sizes out of my old junk. Even tiny motors. Cd drives to vacuums to garage doors
@kaden56 5 жыл бұрын
This guys channel is gold. He’s on my top 10 recommended for engineering friends.
@JeremyFieldingSr 5 жыл бұрын
Thank you! A Recommendation is the greatest compliment
@Yonatan24 5 жыл бұрын
And Matthias Wandel Marius Hornberger Jer's woodshop (did he change the name?)
@erict964 5 жыл бұрын
@@Yonatan24 Jeremy Schmidt
@rid359 5 жыл бұрын
Top 10!!??? Top 1 I’d say!
@kwik-key112 2 жыл бұрын
Great job delivering helping others You can have anyone telling others how to fix repair - But you can't beat a well spoken person with passion that can teach others, instructor educator & first time watching your video after others I subscribe for your passion for what you do that makes & can deliver what your doing is the best
@roha8993 Жыл бұрын
Gotta love this guy, as if he's teaching his young children. Does presentation to make it so easy to understand. Gotta be a great parent.
@andrewbezzina87 5 жыл бұрын
I am so glad KZfaq brought me here. This channel will become really useful when i start doing my DIY projects
@komitadjie 5 жыл бұрын
This is exceptionally well laid out, I'm filing this one as one to share with my friends when they ask me questions on motors! Best explanation I've ever seen.
@elppedro77 3 жыл бұрын
Thank you Jeremy! You explain what these motors do and how they work so much better than even an electrician would.
@fritzwilhelm8258 3 жыл бұрын
Much gratitude, from someone who didn't take shop classes. This relatively basic information is harder to come by than one might think.
@FL-gg4dq 3 жыл бұрын
This was one of my biggest things confusing me when I started building stuff. Thanks for explaining !
@joerobinson4453 5 жыл бұрын
A pleasure to listen to someone who understands their subject as well as this person.
@tonylawless5626 2 жыл бұрын
In case nobody told you today I just wanted to say you're amazing my friend keep up the great work. You inspire me
@tolkienfan1972 3 жыл бұрын
You know someone is good when many questions are answered with links to their other videos!
@mudsuckingpig6246 4 жыл бұрын
26 year electrical maintenance and I love the your teaching, keep it up!
@andrewwronski1763 3 жыл бұрын
@Jeremy Fielding You rock! I stumbled onto your channel and I love how you explain what something is and how the everyday person can do something with it and how they can get it! You have quickly become one of my top 5 channels to watch and get information from. You don't have filler fluff, your information is on point, your easy to understand, and you update your videos with the links you do in future videos!! Love the channel, Keep up the superb content!!!
@synapticmemoryseepage4447 3 жыл бұрын
Fielding provides an excellent summary and explanation of many electric motor types, with motors in hand. Excellent teacher. Thanks!
@abebaabeba484 2 жыл бұрын
Hi, Jeremy Fielding 1. You explain motors in concise 2. Your voice and your English is excellent 3. Deep knowledge 4. Good you wrote some words Do it more !!!!!!!
@themonkeydrunken 5 жыл бұрын
Always a treat to see a video from you, Jeremy. Thanks for posting all of this useful info!
@JevonMusicGroup 5 жыл бұрын
Love your videos! I'm a middle school STEM teacher, but always been a tinkerer at heart. I can sense your passion for this stuff... you're helping to reinvigorate my passion. Thanks!
@SamieMac1 2 жыл бұрын
I think it's pretty cool that the smartest guy on KZfaq is humble enough to tell you up front he could make a mistake..
@Rob-Heaston 2 жыл бұрын
I love how you organize and execute your videos. Thank you for sharing your knowledge sir!
@sheldonkirschbaum6213 5 жыл бұрын
Excellent practical professional teacher. Wish I had him teaching me 50 years ago.
@pacowang283 5 жыл бұрын
That was an excellent video. Thank you for the education
@glenndrew7917 3 жыл бұрын
Stumbled on this and watched it all the way through. Clear explananations. Will look at discarded appliances very differently from now on.
@interestedinstuff1499 3 жыл бұрын
Dude, you are an absolute legend. Clear, straight to the point, no excess fluff in the script. Subscribed and notifications. Plus this comment in case it helps the algorithm.
@P_RO_ 5 жыл бұрын
An excellent presentation as always. Other guys have covered the differences but they are either too deeply technical or too shallow. You always strike the right balance and make the info understandable for the average tinkerer. One of the best YT channels ever!
@NorthernKitty 4 жыл бұрын
Just want to thank you for putting this video together - even though this is an "introductory" video, you cover a lot of ground that left me feeling like I have a solid overview of the types of motors that are out there and why I may wish to use one versus another. You organized the information thoughtfully and efficiently, and communicated it clearly and concise. Great job!
@squarebob62 3 жыл бұрын
Over the last year and a half, I have watched this four times, at least. I learn or retain something new every time. Thanks again.
@gordonfischer8484 3 жыл бұрын
Hey Jeremy thanks for these videos about motors. Super helpful. I’m building a belt grinder for knife making motor is 1.5 hp at 3600 rpm with a vfd. Was able to find the motor for free and needed to rewire it, would have had a real hard time without these great videos! Great information spoken and presented very well.
@The-KP 5 жыл бұрын
One of the clearest explainations of motor and power facts I've seen yet. My college professor managed to unnecessarily overcomplicate this very same topic area, confusing a whole class! Only the strong survived, but Jeremy's style is very acquirable.
@nathanbrungardt7885 4 жыл бұрын
Jeremy, you have no idea how happy I am to have found your channel, I recently was lucky enough to land an operator job in a power plant off the street where they are going to "train/school" me on the job, I was struggling with all the various motors that we use on different types of equipment and the way you teach and the knowledge you have is truly a blessing, thank you so much for your time in making videos and teaching others man, I greatly appreciate it!
@petermeulenbroek2630 3 жыл бұрын
First time watching this guy. I am hooked! This was amazing. So much information, so well spoken. As an educator, I will be analyzing his delivery as well as use the content in my DIY projects. Thanks!
@Panvil 2 жыл бұрын
Awesome content Jeremy. People like you and James Bruton inspire me to be the best maker I can be. I’m a mech. eng. working in robotics, and your content is spot on
@drhjr7516 5 жыл бұрын
Very nice! Tech for 30 yrs. Learned something new today. Thank you
@rayc.8555 4 жыл бұрын
This is the best explanation of electric motors that I have ever seen. Thank you
@lucasdominichini3095 7 ай бұрын
Future engineer here, this video is as clear as it gets. Thank you sir.
@rishierish7720 9 ай бұрын
Good stuff wish I had you as a teacher when I was younger.
@CubicSpline7713 5 жыл бұрын
Fantastic presentation and very interesting to me. Good man!
@surfinpsych 3 жыл бұрын
How am I just now finding this? You are amazing, sir.
@MrMaikeul 6 ай бұрын
Dude. If only KZfaq was like this everywhere. Amazing video. Thank you for the time taken. :)
@denisstanley7449 3 жыл бұрын
easy listening. well articulated and just the the right speech rate to talk. Also great explanations. excellent presentation
@randomuser778 5 жыл бұрын
Man, I am _really_ digging your content. You do a wonderful job of presenting the information. Keep up the great work, brother.
@futureshock382 4 жыл бұрын
KZfaq reccomending something that DOESNT kill my braincells? Did I shift realities again? Great video, very clear and dense with info
@goju09alt9 4 жыл бұрын
You didn’t know? We switched to Universe #447
@beaconblaster33 3 жыл бұрын
We all have this in common
@athertones1775 3 жыл бұрын
Brilliant. Spent loads of time reading about motors & you just summed up everything I needed to know in 20 mins. Thanks :)
@MahmoudSuhail 2 жыл бұрын
This man should be well supported. And it’s the second time I say such a thing since started using the internet.
@savager9936 4 жыл бұрын
Man you are one of a kind, a gift from God!!! Thank you very much for explaining this, i have several motors in my workshop but i lacked the knowledge to make proyects. Thank you very much, God bless you man!!
@super_slo 4 жыл бұрын
OMG information overload! WOW! This feels like the video component of a solid motor reference article. Something written that's easy to refer back to would be amazing - but what a fantastic video!!!
@stuffandymakes1648 2 жыл бұрын
This was a fantastic explanation of motors and especially the relationship between torque and RPM. This is going on my list of resources.
@ramgowda6834 7 ай бұрын
Awesome presentation by Mr. Fielding. No nonsense presentation. Mr. Fielding thanks for making this video. I’ll watch your other videos as well.
@Smershsh 3 жыл бұрын
I just found this channel, this is the 5th video i'm watching in a row. My weekend is shot now.
@sanches2 5 жыл бұрын
That's a really neat overview, you are doing here!
@MA_KA_PA_TIE Жыл бұрын
My guy you are doing a great service for your fellow man by sharing your knowledge in such an easy to understand way. Thanks.
@garrettmcfarlane1901 Жыл бұрын
No frills, no gimmicks. Only pertinent, and accurate information. Excellent presentation. Keep it going, my friend.
@0MoTheG 4 жыл бұрын
Now I look differently at treadmills. Now I think they are "useful".
@redangrybird7564 4 жыл бұрын
More useful dead than alive, ✌😵
@BrilliantDesignOnline 3 жыл бұрын
Not JUST for using as a clothes hanger.
@paulsmith778 3 жыл бұрын
HA! I feel you!!!
@dubsbarry9963 3 жыл бұрын
😄
@TimTrOn3000 3 жыл бұрын
If you want to blow your knees out, theres few more useful things
@doktork3406 5 жыл бұрын
really good video i didn't give electric motors much thought and now i'm considering them for a special project...these might be even better than what i had in mind thank you for the info
@sailingheretic Жыл бұрын
BTW, you are obviously the type of super-smart dude I admire…the type whose knowledge is based on real world experience!
@dekke2.6 3 жыл бұрын
this is pretty sick. i enjoy how this man speaks and explained the horsepower of every motor parts. also watts. this will caught my interest to listen well on electronics! 🙌💯
@CharlesCarabott 5 жыл бұрын
Jeremy Fielding you are a one man electric motor engineering university. Thank you for sharing your knowledge
@Nirotix 5 жыл бұрын
Wow! I came across KZfaq video that I actually enjoyed watching because there was loads of information squished into it, pretty well zero run a round, and no stupid music! Have my sub, great job! 😉
@Glynchbrook 3 ай бұрын
Very intersting video. I'm doing some initial research about changing the motor on my panel saw from three phase to single phase. Thanks for your clear explanations.
@walkingthruyourdata-6019 2 жыл бұрын
I swear, I don't know how I learned anything without You Tube. You have wonderful understandable explanations. The military training isn't as good. Thank You!
@zior8001 5 жыл бұрын
Seen many videos on this topic but this was explained perfectly.
@TroyBlass 3 жыл бұрын
I've watched these videos probably once a year since you started. I admire your work and would like to tell you that i appreciate the effort you put into everything. If you're ever in NePa let me know.
@mikenco 7 ай бұрын
Excellent vid for refresher and update! Thank you Jeremy, you're an excellent educator.
@milesaheadllc Жыл бұрын
First time I've ever broke out the notepad during a KZfaq video. Thank you for this. Awesome work chock-full of information in laymen's without showing off and confusing newbies with veteran(industry insider) terminology and useless reteric like a lot of other channels.
Jeremy Fielding
Рет қаралды 211 М.
Scary Teacher Gaming
Рет қаралды 57 МЛН
Jeremy Fielding
Рет қаралды 622 М.
Jeremy Fielding
Рет қаралды 697 М.
Jeremy Fielding
Рет қаралды 189 М.
Jeremy Fielding
Рет қаралды 3,8 МЛН
Влад Закроев
Рет қаралды 4,3 МЛН